Skip to Content

What happens when your iPhone shuts off and wont turn back on?

When your iPhone shuts off and won’t turn back on, there can be several potential causes. The first thing you should do is force restart your iPhone to attempt to resolve the issue. To force restart an iPhone, simultaneously press and hold down the Home button and the sleep/wake button until the Apple logo appears.

If the restart does not resolve the issue, you should connect your iPhone to your computer and try to restore it to its original setting using iTunes.

In some cases, the issue may be due to a drained battery or an internal hardware issue. If this is the case, you may need to take your iPhone to an Apple Store so they can run diagnostics on your device and identify the issue.

Depending on the issue they find, they may recommend a repair, battery replacement, or a refurbished replacement device.

Why did my iPhone just go black and wont turn back on?

It is possible that your iPhone just went black and won’t turn back on due to a number of different reasons. One possibility could be a drained battery. iPhone batteries can deplete quickly, so if you haven’t charged your iPhone in a while, it could be the cause of the problem.

Make sure to plug your device into a power source and charge it for at least an hour or two before trying to turn it back on.

Other potential issues could be related to software or hardware. It is possible that your device could have frozen or crashed and simply needs to be restarted. Try holding down the power button and home button together until the Apple logo appears.

If the device still won’t turn back on, it could be a hardware issue, such as a faulty device port or connector, a damaged display, bad logic board, or something else. In this case, you may need to take your device to an authorized Apple service provider to have it repaired.

Why has my iPhone suddenly gone dead?

Most commonly, it is due to the battery being drained or failing. This can happen if you have been using the phone heavily, the battery life is naturally aging, or the battery is being overworked due to a malfunction.

To check, you can try plugging the phone in to a power source – if the charge indicator turns on, then the battery is the likely cause. Other possible causes are a faulty power cable, a corrupted operating system, or even a hardware malfunction.

If the phone still won’t turn on after charging, then the problem could be hardware related and may require servicing from an Apple store or a certified repair technician.

Why is my phone not turning on at all?

If your phone is not turning on at all, there are a few potential causes that you should consider. One potential cause is a faulty battery. If your battery is damaged, empty, or not functioning correctly then it could prevent your phone from turning on.

Another potential cause is a hardware issue related to the power, audio, or charging port. If these components are damaged, corroded, or misaligned, then it can result in your phone not being able to power on.

Additionally, you may have a software issue that is preventing your phone from powering up. If you recently installed a new software update, then it could be that certain files didn’t install correctly, which could prevent your phone from turning on.

Finally, if you dropped or damaged your phone in some other way, then it could be that something inside of your phone is not functioning properly and needs to be repaired or replaced.

How do I force my iPhone to turn on?

If your iPhone won’t turn on and you’ve exhausted all other troubleshooting steps, then you may need to try force restarting it. To do this, press and hold the Sleep/Wake button (also known as the Power button) and either of the Volume buttons at the same time until you see the Apple logo.

Then, release the buttons and allow your iPhone to boot up normally. If you can’t force restart your iPhone, follow the instructions in your iPhone User Guide to reset it. If that doesn’t work, you may need to contact Apple support or take your iPhone to an Apple store for further diagnosis and repair.

How do you turn on a completely dead iPhone?

If your iPhone is completely dead, it is likely due to a drained battery. You will need to charge the device in order for it to turn on. Try plugging your iPhone into a wall charger (not the USB port on a computer) using the cable that it came with and leave it to charge for at least an hour.

If your iPhone does not turn on after this then try doing a hard reset. To do this, press and hold both the home button and power button at the same time until an Apple logo appears on the screen. Once it appears, let go of the buttons and wait for the device to boot.

Once your device is back on, you can proceed to check the battery percentage to determine if it needs more charging. If the battery indicates a low percentage, leave the device plugged to charge until it’s fully charged.

How do you fix a dead iPhone that won’t charge?

If your iPhone won’t charge, there are several potential causes and solutions that you can try before visiting a repair shop or seeking replacements parts.

First, verify that the charging cable is securely attached to both your phone and the wall charger. A loose connection can make it appear that your iPhone isn’t charging. You can also try using a different charging cable and/or wall charger.

Additionally, try using a different outlet and/or power strip to ensure that the issue isn’t with a power source.

If issues persist, try using the QR Code on the back of your Apple device to ensure your device is running the latest version of iOS. If it’s out of date, updating the software can help. You can also back up your phone to iCloud or iTunes and then completely restore it.

Doing this can “reset” your battery and may fix any charging issues.

Finally, if the problem still persists and your iPhone won’t charge, you may need to get it serviced by Apple or a qualified technician. Consider taking it in and getting it checked out.

How do you know if your iPhone battery is damaged?

If you think your iPhone battery might be damaged, there are a few signs to look out for.

One of the main signs that your iPhone battery is damaged is if it does not last as long as it used to. For example, if it used to last all day but now only lasts a few hours, your battery may need to be replaced.

Another sign of damage is if your iPhone will not hold its charge when it is not in use. This could indicate that the battery is over-drained or has become damaged.

It is also possible to check the condition of your battery using the Settings app. Here, you can check to see if the battery is damaged or needs to be replaced.

Finally, if these checks do not show any signs of battery damage and you are still seeing strange performance or battery life results, it is possible that there may be another issue that is causing the issue, such as a software glitch.

If you have any reason to suspect your iPhone battery is damaged it is best to take it to an Apple Store or Apple Authorized Service Provider for a professional diagnostic.

What to do if iPhone stops working?

If your iPhone stops working, there are a few different troubleshooting steps you can take to try and get it working again. Firstly, check to make sure the phone is still charged and plugged in correctly.

If the battery is completely drained, then plug it in and leave it for a while to see if it will power on. If it does not, then try a different charging cable or plug it into a different power source.

If the phone is still not powering on, then try performing a hard reset. This involves pressing and holding down the Power Button and Home Button (on iPhone 6 and earlier), or the Power Button and Volume Down Button (on iPhone 7 and later) for 10 seconds until the Apple logo appears.

This should reset the device and it may power back on.

If the reset does not work, then you should consider restoring the iPhone. To do this, you will need to connect the device to a computer using iTunes. You then select the ‘Restore’ option in iTunes to restore the device to its original state.

If the device still does not work after a restore, then you should contact Apple Support. They will be able to provide further assistance and may be able to repair the device.

How do I revive a dead iPhone?

Depending on what specifically has caused the phone to die.

If your phone has died due to running out of battery power, then the simplest solution is to just charge it. If you have the correct cable and power adaptor, then plug it in and wait for it to turn back on.

If you don’t own the correct cable or adaptor, you may be able to borrow one from a friend or purchase one from a store or online.

In some cases, a dead battery may require a bit more work in order to be revived. If the battery is completely unresponsive, you may need to replace it. You can find replacement batteries online, and the process is fairly easy depending on the model of iPhone you have.

It will involve taking apart the phone and replacing the battery yourself.

If your phone has died due to corrupt firmware or software, you may need to reset the phone completely. To do this, you’ll need to connect the phone to your computer and use either iTunes or iCloud to restore the software.

This will essentially undo any updates or settings changes on your device, so you may want to seek professional help or consult with Apple Support if you aren’t comfortable doing this on your own.

Finally, if your phone has died due to physical damage then you’ll need to take it to a professional repair person or shop. They may be able to repair the phone for you or, in worst cases, you may need to purchase a new one.

Why can’t I do a hard reset on my iPhone?

A hard reset resets all of the settings on your phone to the original factory settings and deletes all of your personal data and information. This means that any data or applications you’ve downloaded will no longer be on the phone and you will need to reinstall or re-enter that data.

Since Apple is prioritizing the security and privacy of their users, they have made it so that a user must know their Apple ID and password in order to complete a hard reset on an iPhone. This prevents anyone who finds or steals a phone from wiping it clean before it can be returned to its original owner.

How do you unfreeze an unresponsive iPhone?

If your iPhone is unresponsive and you think it’s frozen, there are a few steps you can take to fix the issue.

First, try restarting your iPhone by pressing and holding the sleep/wake button until the red slider appears. If you can’t get the red slider to appear, try pressing and holding both the sleep/wake button and the Home button at the same time.

Keep them held down until you see the Apple logo.

If restarting your iPhone doesn’t seem to help, then try forcing a restart by pressing and holding both the sleep/wake button and the Home button at the same time for at least 10 seconds. You should see the Apple logo when it’s successfully forced to restart.

If these steps don’t work, then you can try resetting your iPhone. To do this, press and hold both the sleep/wake button and the Home button at the same time for at least 10 seconds. The screen will go black and then the Apple logo will appear.

Then you can release the buttons and wait for the iPhone to reset itself.

Finally, if none of these solutions work, then you should contact Apple Support for more help.

How do I factory reset my iPhone with just the buttons?

Factory resetting your iPhone with just the buttons is a simple process. First, make sure your iPhone is turned off. Once it is off, press and hold down both the Home button and the “Sleep/Wake” button until the Apple logo appears on the screen (this can take up to 10 seconds).

Once the logo appears, release the buttons.

Your phone should then begin to power on and you will see a progress bar on the screen. Let the progress bar move until it is at the end. Once it is at the end, the phone should display the “Hello” screen.

At the hello screen, you will be prompted to set up your device. Instead of doing that, press and hold the Home button until the applications screen appears. You should then see an icon of iTunes displaying the image of a USB.

Once this appears, press and hold both the Home button and the Sleep/Wake button until the ‘Connect to iTunes’ logo appears on the screen.

You can then connect your device to your iTunes and a dialog box will appear asking if you want to restore or update your device. Select “Restore” from this window and the system will reset itself to factory settings.

Why won’t my phone turn on after it died?

When a phone fails to turn on after it has drained its battery, it could be due to a few different reasons. One of the most common issues is a faulty battery that needs to be replaced. If the phone was exposed to extreme temperatures, it may have damaged the battery or other components.

Another possibility is a corrupt operating system, which can happen if there were any recent updates, applications were downloaded incorrectly, or the phone was exposed to viruses or malware. It could also simply be a lack of power, indicating the phone needs to be plugged in and charged.

In some cases, the issue could be with the power/sleep button or even the charging port itself. If none of these solutions resolve the issue, it may be time to find a qualified repair technician to take a closer look.

How can I get my dead phone to work again?

Unfortunately, it is not possible to revive a dead phone. If your phone is not working, you will have to get a new one. Before you do, you should make sure you have backed up all of your important data, such as contacts, photos, and documents.

If your original phone still turns on, you should back up all of the data onto your computer or cloud storage. If your phone is totally dead, you can still access some of your information if you have it stored in the cloud.

Once you have saved this data, you can look into getting a new phone. There are different options available, depending on your needs and budget. You could buy a used or refurbished phone, or you could get a new one.

You will also need to get a mobile SIM card to activate your phone, and you may need to transfer your current plan to your new device.

No matter which option you choose, make sure your data is backed up so you don’t lose any important files.

How do I force restart?

Forcing a restart is a process used to reset your device, which can be done through either a hardware or software method depending on the type of device you have.

If you have an iPhone, you can force a restart by pressing and holding the Sleep/Wake (or power) button for several seconds until the “slide to power off” option appears. Once it does, slide the power off option to the right, and wait for the device to turn off.

After it has turned off, press the Sleep/Wake (or power) button again until the Apple logo appears, signaling the device has restarted.

For Apple Watch, you need to press and hold both the side button and Digital Crown for 10 seconds until you see the Apple logo appears, signaling the device has restarted.

If you have an Android device, you need to press and hold the Power button and the Volume Down button simultaneously until the manufacturer’s logo appears. This can take up to 25-30 seconds, but once it appears the device has been restarted.

In addition to the hardware methods, you can also force restart certain devices through a software method. On Apple devices, you can access the option in the Settings app under General > Reset > Reset All Settings.

For Android devices, open the Settings app and head to the Backup & Reset option, then tap the Reset option and confirm that you would like to reset the device.

Each device is different, so if you’re not sure how to force restart your device, it may be best to consult the user manual that was provided with it when you purchased it.

How do I restart my iPhone when nothing works?

If your iPhone is not responding and nothing is working, here are a few steps to troubleshoot your issue and restart your device.

First, press and hold the sleep/wake button (located at the top of the device) and the Home button (located at the bottom of the device) simultaneously for 10 seconds or until the Apple logo appears.

This is the most basic way to restart your device and should be done before trying any of the steps below.

If that does not work, try plugging your iPhone into a computer using its sync cable. If iTunes opens automatically, try clicking the Restore iPhone button within the iTunes window. This will reset your device and the Apple logo should appear.

If nothing is still working, you can try connecting your iPhone to your computer and performing a “hard reset. ” To do this, first make sure you’ve downloaded the latest version of iTunes. Open iTunes and connect your iPhone to your computer using its sync cable.

Then, press and hold the Home button and the sleep/wake button simultaneously for 8 seconds. Your device will then turn off and on automatically.

It is recommended to make a backup of your devices data before performing any type of reset or restart. If none of these steps worked to restart your device, contact Apple or an Apple Store for assistance.

Will I lose pictures if I reset my phone?

It depends on whether you have backed the pictures up or not before resetting your phone. If you have saved the pictures to cloud storage, like Google Photos, then you will still be able to access them after resetting your phone.

If, however, you have not backed up your photos, then they will be deleted when you reset your phone – so it is always advisable to do so before resetting any device. To back up your photos, select the photos you want to save, then go to the ‘Settings’ menu on your phone and follow the instructions to transfer them to an external device or cloud storage platform.

How do I manually Restart my computer?

To manually restart your computer, you need to shut down your computer and then turn it back on.

To shut down your computer, open the Start menu and select the Power icon. This will bring up a list of available power options. Click Shut down to immediately power off your computer.

Once your computer is powered off, you can turn it back on. Depending on your computer, this might be as simple as pressing the power button. If your power button isn’t working, you may need to unplug the power cable from the back of your computer and plug it back in.

When turning your computer back on, you can typically press the power button once and the BIOS will start up. Depending on your computer, this could be followed by booting up into your operating system.

Once your computer is up and running again, try to identify what caused the need for manual restart before. Depending on the issue, you can take steps to address it to avoid future shut downs.

What is the shortcut key for Restart?

The shortcut key for Restart on a Windows computer is Ctrl + Alt + Delete. Pressing this should bring up a screen giving you the option to restart the computer, though you may need to confirm it. You can also restart a computer by clicking the Start button in the taskbar and choosing the Restart option from the menu.

On a Mac, you can restart by clicking the Apple menu in the upper left corner of the screen, then choosing the Restart option.