One of the biggest benefits of having a semi-inground pool is that it offers the ability to enjoy the many benefits of a pool with the much lower cost and ease of installation of an aboveground model.
Semi-inground pools can be partially or completely sunken into the ground, giving you a beautiful, in-ground like look without the hassle of excavating and digging. They can also be designed in a way that minimizes installation costs, as you can use the existing patio or deck as part of the pool’s area.
Plus, semi-inground pools come in multiple styles, shapes and sizes, allowing you to find the perfect fit for any yard. And since semi-ingrounds cost much less than in-ground models, they’re a great choice for those on a budget.
How long do semi above ground pools last?
The longevity of semi above ground pools can vary depending upon a variety of factors such as the pool material, quality of installation and maintenance, the climate and environmental conditions, and the quality of chemicals used to maintain the pool and water.
Typically, the type of pool material will be the biggest factor in determining the life span of a semi above ground pool; vinyl or plastic pools will typically last between five and fifteen years, while steel walled pools may last up to a couple decades or more.
Additionally, if the pool is properly installed and all recommended maintenance is performed regularly, the pool’s life span can be extended. As such, with proper installation, care and maintenance, it is not uncommon for semi above ground pools to last for 10 years or more in many circumstances.
How deep can a semi inground pool go?
A semi-inground pool can typically go as deep as 4 to 6 feet, but can vary based on the design and type of pool. The shallow end of the pool is usually a few feet off of the ground, while the deep end can go up to 6 feet in depth.
Both the shape and size of the pool can play a role in the depth of the pool. Depending on the type of installation, you may also have the ability to customize the depth of the pool to fit your individual needs.
The average semi-inground pool is typically 40 to 80 feet long and has a depth of around 4 feet, though the depth can be adjusted according to the specific design requirements. Some semi-inground pools that are longer than 80 feet are usually built with stairs and shallow ends where the water is between 2 and 4 feet.
Since the pool is usually set into the ground, the walls of the pool are less visible and give it a more natural look.
When it comes to installing a semi-inground pool, there are a few factors to consider such as location and soil conditions before finalizing your pool’s design and depth. In some cases, local zoning regulations and building codes will determine the allowable pool depth and maximum pool size.
Regardless of the restrictions, semi-inground pools still offer a great option for adding family fun, relaxation, and of course a beautiful backyard look.
Can you put a semi inground pool all the way in the ground?
Yes, you can put a semi inground pool all the way in the ground, although the process involves a lot of additional prep work and cost. The construction of a semi inground pool involves excavating a deep trench in the ground and then supporting it with concrete blocks or an in-ground support system.
With proper excavation of the pool territory and installation of the support system, the pool can be sunk all the way in the ground. This is significantly more expensive and requires a great deal of additional work compared to a standard semi inground pool.
However, the extra effort is worth it, as the end result is a fully inground pool that looks just as nice as any standard pool.
Do semi inground pools stay warmer?
Yes, semi inground pools tend to stay warmer than completely above ground pools due to their slightly sunken in design. The increased depth allows for more water and greater protection from the wind, which helps to keep the water temperature more consistent year-round.
Semi inground pools also usually require less maintenance and less upkeep overall, as they are usually more safely integrated into the surrounding landscape than a fully above ground pool. Furthermore, semi inground pools may also be able to benefit from natural heating sources like the sun, which helps to increase the temperature of the pool and make it more comfortable even during the colder parts of the year.
Are semi inground pools all one depth?
No, semi inground pools do not have to be one depth. Semi inground pools can be custom designed to meet the needs of the homeowner. Depending on the size and shape of the pool, it is possible to have a shallow end, deep end, or both.
In addition, a homeowner can customize the pool with a variety of steps, benches, shelves, and raised walls. With semi inground pools, the size and shape are up to the homeowner, so it is possible to create a pool with a variety of depths.
Can an above ground pool be partially buried?
Yes, an above ground pool can be partially buried. This process is commonly referred to as ‘partially inground’. This method is typically used to help keep the pool stable and improve the look of the pool in its existing environment.
The most important part of partially inground pools is making sure the sides are sealed from the soil, otherwise you can experience erosion and water seepage. This is done by laying a flexible PVC sealant around the circumference of the pool and filling any gaps with sand.
Once the sealant has been applied, you can then partially bury the pool to provide extra stability. This can be done by excavating the soil within the circumference of the pool and filling it in with gravel or sand.
Be sure to make the sides of the pool even so it looks aesthetically pleasing. Additionally, you will want to make sure the pool is still visibly above the soil level, as this will help keep it safe and free of water collecting in the soil.
How far can you bury above ground pool?
The general rule of thumb for burying an above ground pool is to bury it so that the top of the pool is at least 1 to 2 feet below the surrounding grade. This means that the deepest part of the pool should be at least 3 feet below ground level.
If your pool is going to be in an area with fluctuating ground water levels, then it should be buried even deeper. Installation often involves digging a large, deep ditch, then filling it back in after the pool is put in place.
Additionally, the deeper the pool is buried, the sturdier the wall will be and the more protection it will have against flooding. It is also important to make sure that the wall is level and that the side edge of the pool is firmly on the ground, or encapsulated in concrete before it is buried.
Can you bury a Doughboy pool?
Yes, you can bury a Doughboy pool, but it’s not recommended by the manufacturer. Burying a Doughboy pool is much more complex and time-consuming than a regular aboveground pool as it requires you to correctly excavate the area and properly promote soil installation and wet-mixing to ensure that the pool stays in place for many years.
Additionally, there are certain safety considerations when burying an aboveground pool such as ensuring the pool does not interfere with any utility lines or other underground obstructions, so it is important to make sure you have a professional pool installer to help oversee the process.
While burying Doughboy pools is something that can be done, it is best to talk to a professional to ensure the process is done safely and with the correct materials and techniques to ensure the pool is properly installed.
How do you make an above ground pool look built in?
Making an above ground pool look built in requires attention to details and careful planning. The first step is to attach the pool to a deck. This can be done by using a freestanding deck system with flush anchors to attach the pool to the deck or by using a semi-in ground deck system which requires a pool wall brace or galvanized steel braces for extra support and safety.
Once the pool is firmly mounted to the deck, the area around the pool can be partially or completely enclosed with fencing and landscaping like shrubs or flowers. Balustrades, trellises, or pergolas can also be used to provide some relief from the sun and help hide the pool walls.
Covering the pool with a pergola frame or lattice is another great way to make the pool look built-in. Finally, a pool deck is necessary to complete the effect. A pool deck should be level and of a suitable size and shape to accommodate furniture, umbrellas, and other elements that contribute to its built-in look.
It should also be made of non-slip, durable, weather-resistant material to ensure safety and reduce maintenance.
What type of above ground pool can be buried?
Most types of above ground swimming pools can be buried partially or fully into the ground, though it is important to make sure that you choose one that is suitable for the task. Metal-sided pools, for example, are not structurally designed to handle the additional pressure of being buried, and could buckle.
On the other hand, a pool made from plastic, like a Kayak pool, can be buried up to the top of the pool wall. Make sure to only do this project with a pool that is approved for such installation.
Before you start, you should also make sure to check with your local government to ensure that you are following all safety regulations that may apply to this type of project. For example, your local building department may require that the pool is outfitted with a permanent gate or fence to comply with safety codes.
You may also need to obtain a permit before you move forward with the project.
When you are ready to begin, it is important to make sure that the area you plan to bury the pool in is level and free from debris. Make sure to carefully remove the surrounding soil and mark the area where the pool will be located.
Next, use a shovel to dig along the shape of the pool and make sure the sides and bottom are close to smooth. Then, fill up the pool with water to make sure the pool is level and to double-check that the size and shape is right before permanently burying the pool.
Once water is added, start to fill the pool in with soil using the same techniques previously used to excavate the area. When you are done, you should have a partially or fully buried above ground pool.