Skip to Content

What is the board under cabinets called?

The board that is found underneath cabinets is typically referred to as a toe kick. It is typically made from 3/4″ plywood and is used to allow access to the area underneath the doors on the cabinets.

This area can often be used for extra storage, and allows for easier cleaning and installation of the cabinets. The toe kick is also used to create a gap between the floor and the doors, thus facilitating the opening and closing of the cabinets.

Toe kicks are most commonly found in kitchen and bathroom cabinets, although they are occasionally used with other types of cabinets as well.

What is the piece of wood called at the bottom of kitchen cabinets?

The piece of wood located at the bottom of kitchen cabinets is called the kick plate, or toe kick. It typically extends from one side of the cabinet to the other and from the floor up to the height of the cabinet base.

Its purpose is to provide a finished look and to protect the lower panel of the cabinet from damage due to contact with shoes, vacuum cleaners and other items. Kick plates also give some extra space for your feet, making it easier to reach items stored in the lower cabinets.

They are usually made of wood but can also be manufactured in metal or plastic. In modern kitchen designs, they may be part of the cabinet doors or can be ordered as part of a kit.

What is the recess at the bottom of a base cabinet called?

The recess at the bottom of a base cabinet is commonly referred to as a toe kick. This is the typically the area below the cabinet that sits a few inches from the floor, allowing for easier access in reaching what is stored in the cabinet.

Additionally, it is used as a spot to place one’s feet as a resting spot when leaning over the sink or counters. The toe kick can be filled with drawers which helps to use any dead space in the kitchen.

What is a kitchen cabinet plinth?

A kitchen cabinet plinth is a trim piece found at the bottom of a tall kitchen cabinet, typically located between the cabinet and the floor. This trim piece is typically found on kitchen cabinets, in which the cabinets run right up against the floor, so a plinth is necessary to conceal the edges and create a more finished look.

The plinth is usually about 4-5 inches in height, and can be found in various colors, materials, and designs. Typically, it is made from a hardwood designed to match the kitchen cabinets, or from a vinyl material designed to match the layout of the kitchen.

Not only does it help to tie the look of the kitchen together, but it can also protect the cabinet from water damage and damage from pet nails and claws. The trim piece can also be used to hide any gaps that may have been present between the cabinets and floor prior to installation.

What material are Kickboards made of?

Kickboards are typically made of a hard, durable plastic material. The plastic is lightweight and water-resistant, making it an ideal choice of material for kickboards. The surface is smooth and easy to grip, allowing the swimmer to maintain their balance while they stay afloat.

In addition, swim kicks are an excellent source of low-impact exercise that helps to improve cardiovascular health and strengthen leg muscles, making the lightweight plastic material an advantageous choice for exercising.

What are the different parts of a cabinet called?

The different parts of a cabinet can be referred to as the exterior boxes, doors, drawers, shelves, faces, moldings, pulls, knobs, and hinges. The exterior boxes are the main body of the cabinet and are usually made of wood or metal.

The doors can be either hinged or sliding and can be made of wood, glass or metal. Drawers are usually used for storage of small items and are mounted on glides or runners. Shelves come in all sorts of sizes designed to fit cabinets and can also have lighted box tops to make them more useful.

The faces are the sides, top and bottom of the cabinet box and are usually the same material as the exterior box. Moldings are used to enhance the look and create a unique design. Pulls and knobs are attached to the doors and drawers and provide easy access to their contents.

Finally, hinges attach the doors to the cabinet and can be either exposed or hidden.

What are cabinet Gables?

Cabinet gables are a type of architectural ornament originating from the traditional Dutch gable design. They are typically small and triangular, and often feature decorative details set into their curved surface.

Cabinet gables encompass a variety of shapes, from convex to concave and from round to pointed. These decorative details could include carvings, timber trusses, dentil moulding, and ornamental plasterwork.

They were initially used on exterior facades but were soon adapted for interior uses, such as housing cupboards, bookcases, and other storage areas. Cabinet gables can be used to create the illusion of an additional space or to add aesthetic interest to an existing space.

Their versatility has ensured that cabinet gables remain popular today, often being used as part of a “transitional” interior, combining contemporary and classic design elements.

What is a kitchen kickboard?

A kitchen kickboard is a type of panel that fits along the base of a kitchen cabinet and helps to prevent objects from rolling underneath the cabinet. It is typically designed to match the existing cabinet color, and can even be customized to a particular desired finish or color.

With the panel’s raised edge, it helps to keep items from rolling and falling out of sight beneath the cabinet. Depending on the model of the kickboard, there may even be compartments or drawers within the panel itself, offering an extra storage option.

Kickboards are also easy to install; they are typically secured with nails to the wall or the cabinet’s underside. Overall, a kitchen kickboard is an essential piece of furniture that prevents appliances, dishes, and utensils from collecting dust and dirt underneath a cabinet while simultaneously providing a decorative touch.

What are drawer stiles?

Drawer stiles are vertical component pieces found on either side of a drawer. They are rectangular in shape and fit between the drawer rail and the outside edges of the cabinet face. The stiles provide structural support to the drawer and give it its shape.

They also help to keep the drawer sides aligned and keep them in place. When the cabinet face is installed, the stiles are covered and concealed. Drawer stiles typically range in width from 3 to 5 inches.

They may be made from a variety of materials including plywood, veneer, or solid wood. Depending on the style of the cabinetry, drawer stiles can also be routed to add decorative detail or style to drawers.

Are baseboard necessary?

Baseboards are not strictly necessary, but they can provide a lot of benefits to any home. Baseboards provide a finished look to any room, helping to make it look more professional. They also serve a functional purpose.

By covering the gaps between walls and floors, they help to prevent dirt and dust from getting in and they help to contain heat in the room. Furthermore, they offer an extra layer of protection for walls, helping to prevent moisture and humidity from seeping in and causing damage.

In short, baseboards are not a necessity, but they are generally a good idea for anyone looking to get the most out of their home.

Do baseboards go in before cabinets?

Baseboards should generally be installed before cabinets. This is for several reasons: first, baseboard installation requires some cutting and shaping of the board, which is most easily done when the flooring and walls are clear.

Additionally, it’s much easier to measure for and fit cabinets when the baseboards are already in place. Finally, baseboards provide a finished look to a room, and it’s best to get them fitted before the cabinets are installed to avoid scuffs and marks from moving them into place.

It’s best to consult with a professional to make sure that installations like this are done correctly and to the highest standard.

Do you remove baseboards to install cabinets?

It really depends on the type of cabinet and the type of baseboard you are dealing with. Generally speaking, it is best to remove the baseboards in order to properly and securely install the cabinets.

This allows you to get in behind the cabinets to secure them to the walls or floor as needed. Most baseboards will snap off very easily either by popping them loose with a crowbar or cutting them with a reciprocating saw.

In some cases, you may be able to get away with just sliding the cabinets between the baseboard and the wall or floor, but this is usually much less secure than actually removing the baseboard. Thus, it is always best to remove the baseboards if you have the time and the right tools to do so.

How do you put a kick plate on cabinets?

Putting a kick plate on cabinets is an easy and straightforward process that requires a few basic tools and materials. Before starting, measure the length and height of the cabinets to get the appropriate size of kick plate.

To begin the installation, you will need a drill, screws, a jigsaw, and a router. Start by drilling pilot holes into the cabinet wall and into the kick plate itself. Then, cut out the kick plate to fit the cabinets using the jigsaw.

Before installing the kick plate, use a router to cut out a groove along the edges of the plate. This will help the plate fit more precisely.

After this is done, place paper or tape around the cabinet to protect the surface while drilling the screws. Finally, set the kick plate into position and then drive the screws through the edge of the plate and into the wall.

Once the screws are tightened, you’re done! Your cabinets now have a stylish, protective kick plate.

Do you screw base cabinets to the floor?

Yes, it is typically recommended to screw base cabinets to the floor. This helps to ensure that the cabinets remain securely in place, especially under weight. When installing the cabinets, you should use screws that are specifically meant for the type of flooring that you have.

If you have tile or linoleum floors, you should use plastic anchors, and for wooden floors, you should use screws that are made for wood. If the walls are expected to bear a significant amount of weight, you may need to use screws that are three inches or longer.

Additionally, when screwing the cabinet to the floor, it is important to mark the location of studs to help prevent damage to the floor material.