Skip to Content

What is the cutting chainsaw chain?

The cutting chainsaw chain is a vital part of a chainsaw and is the primary tool used for cutting wood. The chain is a steel loop with small, sharp teeth that moves around the chainsaw’s guide bar, the metal bar that extends from the chainsaw housing.

The chain continuously spins around the guide bar at a very high rate of speed and is responsible for cutting the wood as the chainsaw is operated. The chain must be lubricated to keep it functioning well and should be regularly checked for dullness or damage to the cutting teeth.

While different chainsaw models may have different sizes and shapes of chain, they all perform the same essential function of cutting the wood. For the best results and safety, it is important to use a correctly sized and sharpened chain that is compatible with a specific chainsaw model.

What Stihl chain cuts the fastest?

Stihl is a popular brand of chainsaws, and they offer a variety of chains that are specifically designed for different cutting jobs. The Stihl Rapid‎Super Comfort chain is often considered to be the fastest-cutting chain available from Stihl.

The chain has a special design that helps to reduce vibrations and minimize kickback when cutting. Its. 325 pitch and. 058 gauge gives it a high-end performance, and its full chisel, square-radius cutter configuration ensures fast, smooth cutting of wood and other materials.

Additionally, the RapidSuper Comfort chain has a low-kickback feature for added safety and is made from nickel alloy for improved durability.

Does skip tooth chain cut faster?

Skip tooth chain cuts faster than standard chain primarily due to the way the teeth are designed. The skip tooth chain has fewer but wider teeth, which can penetrate deeper into the wood and remove more wood in a single pass.

Standard chain has a more traditional, even pattern of teeth that remove less wood in a single pass and doesn’t penetrate as deeply. The skip tooth chain also reduces the chances of binding and kickback due to it’s wide tooth design.

These differences combined greatly reduce the amount of cutting cycles (or passes) the user has to make over the same area of wood, resulting in a faster cut overall.

What chainsaw chain do professionals use?

Professional chainsaw users typically use chainsaws with a 3/8 inch pitch and a gauge of. 050 inch. These chainsaw chains are designed to fit the smaller bar sizes (up to 24 inches) carried by most professional arborists and forestry workers.

The 3/8 inch chain is able to cut through the toughest wood efficiently, while the. 050 inch gauge allows for precision cutting. In addition to size and gauge, professional chainsaw users should also pay attention to the type of cutting tooth (easy-cutting, full-cutting, chipper style, etc.

) and the skip pattern (full chisel, semi-skip, full skip, etc. ). The type of tooth and skip pattern depends on the type of cutting being done and the desired results. In general, a chainsaw chain with a full chisel tooth and a full skip pattern provides the most efficient cut, but a semi-skip or full chisel tooth can still be used for certain jobs.

Ultimately, the best chain to use depends on what type of work is being done.

What makes a chainsaw chain low kickback?

A low kickback chain for a chainsaw is designed to reduce kickback, a phenomenon in which the chain receives a high kickback force when the chain follows its rotation from the tip of the bar. This high kickback force can lead to excessive vibration, unwanted noises and, worst of all, a dangerous flying hazard.

A low kickback chain is designed with a special curvature and depth of the cutting teeth. The curvature helps prevent the chain from engaging into material away from the edge of the bar, so that the cut is happening at the very edge of the bar, where there is less material in the way of the chain.

The depth of the teeth prevents the chain from jamming into the material, again leading to a safer cut.

The chain is also designed with a combination of large and small drive links and cutter links. The larger drive links help the chain roll forward and reduce side force, while the small cutter links are specifically designed to reduce the severity of kickback in the event that the chain does encounter material away from the edge of the bar.

Finally, the pitch of the chain is incredibly important and should be considered when selecting a low kickback chain. The pitch is the distance between the same point on two connected links in the chain.

For example, a ¼” pitch chain is a widely used pitch size for consumer chainsaws and is designed for improved cutting performance as well as reducing kickback.

What’s better full chisel or semi chisel chain?

The answer to the question of which type of chain is “better”, full chisel or semi chisel, is ultimately up to personal preference. Nevertheless, there are some key differences between the two types of chains that might help guide your decision.

Full chisel chains are typically more aggressive and designed to cut faster than semi chisel chains. This makes them ideal for professional users and those with larger trees that need to be quickly processed into firewood or timber.

They also tend to be longer lasting and require less frequent sharpening due to their unique design. However, because of their aggressive nature, full chisel chains can produce more kickback and vibration than semi chisel chains resulting in less comfortable operation.

Semi chisel chains are often preferred by occasional users who don’t require as much speed and power as a full chisel chain can provide. They are designed to be less aggressive and produce less kickback, resulting in more comfortable operation.

While they still require regular sharpening, semi chisel chains usually require less frequent sharpening than full chisel chains.

To sum up, full chisel chains are faster and more aggressive while semi chisel chains are less aggressive and more comfortable to operate. Whether you decide on a full chisel or semi chisel chain will ultimately depend on your individual requirements and preferences.

What type of chainsaw chain is for hardwood?

For cutting through hardwood specifically, it is best to use a chain with full-complement chisel, square-ground cutters. These chain links have a thicker cutting edge and lower angle than standard chains, which results in more cutting power.

In some cases, depending on the size of the hardwood, you might want to opt for a chain with skip-tooth chisel cutters as they offer even more cutting power. Additionally, a chain specifically designed for hardwood may also be safer, as these chains are often more resistant to kickbacks than regular chains.

When shopping for a chainsaw chain for hardwood, be sure to check the size, teeth count and cutters to make sure they are suitable for the job.

What does full chisel chainsaw chain mean?

Full chisel chainsaw chain refers to a type of chain saw chain with a “full” cutters, which are cutters that cut through the entire chain length, rather than just a partial or skip tooth chain. This type of chain is very effective in getting accurate, clean cuts and is suitable for high performance sawing in all cutting applications.

Due to their full cutting length, they require more frequent maintenance to ensure that the cutting edges remain sharp. Full chisel chainsaw chains are typically more expensive than the less aggressive cutting chains, but they are known to last longer and require less frequent maintenance.

Additionally, full chisel chains tend to provide a smoother, better quality cut due to the continuous cutting action. This is especially beneficial for operators who need to complete high-precision cutting applications.

What are the different types of chainsaw chains?

The two most common types of chainsaw chains are full-complement and low-kickback.

Full-complement chains are designed for maximum cutting performance and are ideal for heavy-duty tasks. They feature an aggressive cutting tooth that quickly slices through thick branches and logs with ease.

This type of chain also experiences less wear and tear, making it great for long-term use.

Low-Kickback chains are designed to reduce the risk of kick-back, making them safer to use. They are commonly used for thin branches, small logs, and for pruning trees. The chain doesn’t have the same aggressive tooth profile as the full-complement chain, but it is still effective at cutting up to six-inch timber.

Professional chainsaw users also have the option to choose a specific chain pattern, such as skip, semi-skip, or full-skip. Skip pattern chains don’t have as many teeth as the other types, making them lighter and easier to handle.

Semi-skip chains feature some skip teeth as well as some full teeth, providing a balance between cutting efficiency and safety. Full-skip chains feature only full teeth, providing the maximum cutting efficiency but also increasing the risk of kickback.

Finally, low-vibration chains are designed to reduce the vibration that the chainsaw operator experiences while in use. These chains feature a special balancing system and larger, more balanced drive links that reduce the vibrations that are transferred to the user’s hand.

What’s the difference between micro and super on a Stihl chainsaw chain?

The main difference between a Stihl ‘Micro’ chainsaw chain and a ‘Super’ chainsaw chain is that the Micro chain has smaller cutters (the teeth on the chain) and fewer links, making it lighter and easier to maneuver in tight places.

The Super chain has larger cutters and more links, making it powerful and ideal for heavier-duty applications. In addition, the Micro chain is designed for saws with a bar length of up to 25 cm, while the Super chain is designed for saws with longer bars of up to 70 cm.

The Micro chain is also better suited for pruning and light-duty cutting, while the Super chain is better suited for heavy duty, wood-cutting applications. Ultimately, the type of chain you need will depend on the type of job you’re doing and what you’re cutting.

What type of chain do loggers use?

Loggers typically use one of two types of chains when working – either a logging chain or a choker chain. A logging chain is a large chain designed to be wrapped around a tree trunk and secured in place to help loggers pull the tree in the desired direction.

These chains are usually made of steel and can come in sizes ranging from 1/4 inch to 1/2 inch and can measure 7, 10, or 12 feet in length. A choker chain is a smaller chain that is made of steel and is used in conjunction with a winch to provide grip on a tree trunk and is used to lift and move tree trunks from one place to another.

These chains can come in sizes ranging from 5/16 to 3/4 inches and measure from 6 to 16 feet in length.

What do the colors mean on Stihl chains?

Stihl chains are designed to be compatible with a wide variety of Stihl chainsaws, and they come in a variety of colors. Each color serves a different purpose and reflects the features of the chain.

Green chains are ideal for pruning, limbing, and general cutting. They offer a combination of efficient performance and durability.

Orange chains offer increased depth gauges for aggressive cutting and deeper depths for logs. They are ideal for tougher cutting jobs and heavier duty activities.

Blue chains are designed for professional users who need enhanced cutting speed and precision. The full chisel cutters help make cutting performance consistently fast.

Silver chains utilize a narrow-kerf design that can help reduce vibrations and kickback to improve user comfort. They are ideal for generalcutting, limbing, and pruning.

Finally, Yellow chains are perfect for tougher applications. The full-complement of chisel cutters ensures improved cutting speed and performance.

What do Stihl chain numbers mean?

Stihl chain numbers refer to the length, pitch, and gauge of the chain used on a chainsaw. The length of the chain is measured as the drive link count, which is the number of drive links on the chain.

The pitch of the chain is measured as the distance between three consecutive rivets divided by two and is expressed in inches or millimeters. The gauge is the thickness of the drive links, expressed in either 1/4″ or.

058″, or in metric measurements such as. 325″ or. 063″. It is important to ensure you have the correct chain size for your tool. Having the wrong size can lead to a decrease in cutting performance and an increase in safety risks due to a substandard chain.

What is a Micro chisel chain?

A micro chisel chain is a type of chain specifically designed for chainsaws. It has teeth that are much smaller and more closely spaced than ordinary chainsaw chains, which allows for more accurate cutting.

This type of chain is designed to cut through smaller materials like branches and limbs more easily than a conventional chain, and produces a much finer cut. Micro chisel chains are particularly useful for carving and sculpting, as they produce much smoother, finer cuts than regular chains.

Additionally, they often last longer than regular chains due to their smaller teeth, making them a cost-effective choice.

Why do Loggers Run chainsaw bars upside down?

Loggers run chainsaw bars upside down for a number of reasons. First, it helps prevent the chainsaw from kicking back when it encounters a resistance force. Chainsaws with an upside-down bar will not kick back as much when they hit an obstacle, making them safer to use.

Secondly, an upside-down bar allows the logger to have better control of the chainsaw. This means they can push the saw into the wood at the right angle and have more control when cutting. Finally, chainsaws with an upside-down bar have a longer bar life, meaning that they can be used longer than a standard chainsaw, saving the logger money and time in the long run.

In conclusion, Loggers run chainsaw bars upside down to increase safety, create better control, and extend the life of the saw, making it a beneficial practice for loggers.

What is a full skip chain used for?

A full skip chain is a method of tracking containers or products through a supply chain. It allows users to view the entire journey taken by a product, container, or shipment throughout its lifetime.

It offers more visibility and control than a standard unit level traceability system. This is achieved by tracking the product or container’s unique identifier and storing related data. At each location where the product or container is passed, a barcode scan is used to record relevant location and inventory information.

This data can then be used to identify, locate, and contact anyone who has handled the item in question when needed. This is often useful in quality and compliance audits, risk management, and quick response in case of a recall.

It also helps to improve efficiency and provide real-time visibility of inventory and assets. Furthermore, this system allows for better communications with suppliers and customers involved in the production and delivery chain, making it easier to ensure that products are of high quality, on time, and adhere to the required standards.

Will wet wood dull a chainsaw?

Yes, wet wood can dull a chainsaw’s chain. The moisture in the wood will make the wood more difficult to cut and can lead to the teeth of the chain becoming blunt, making it less effective in cutting the wood.

Additionally, the wet wood could cause the sawdust produced to clog the saw, which slows down the saw’s performance and can damage the saw. To minimize these risks, it’s important to remember to lubricate the chain regularly and to clean out the sawdust often.

Additionally, it’s important to make sure the saw is regularly serviced by a professional who can properly adjust and maintain the chainsaw.

What’s the difference between advanced cut and control cut?

Advanced cut and control cut are two types of VFX techniques used in filmmaking. Advanced cut is a form of editing technique where the editor reduces a video clip or sequence without affecting its original content.

This is done in order to reduce the length of a movie or to change the pacing. By creating certain cuts in the video, the editor can also emphasize certain shots or visual elements to focus the viewers’ attention.

Control cut, on the other hand, is a type of shot transition where the editor creates a cut from one shot to another within the same scene. The length of the cut may be longer to give viewers more time to take in what’s happening in the scene.

Control cuts are used to build tension and emotion, as well as to transition between two elements within the same scene. For example, a control cut could transition between two shots of a character as they move through a room, or between two shots of a character as they express different emotions.