Skip to Content

What is the material for a bathtub surround?

A bathtub surround can be made from a variety of materials, including porcelain, acrylic, cultured marble, gravel/river stones, tile, and solid surface materials. Porcelain is a popular choice because of its durability and easy cleaning.

Acrylic units are a common option too and are easy to install and require little maintenance. Cultured marble surrounds are another great option and are less expensive than other materials. Gravel or river stones can be used to create a luxurious and natural look while still offering water protection.

Tiling can also create a unique and attractive look and with its customizable options, you can make it your own. Lastly, solid surface materials such as Corian® or HI-MACS® are a great choice as they are waterproof, durable, and easy to clean.

Do tub surrounds leak?

Tub surrounds can be prone to leaking, although this isn’t always the case. Factors like poor workmanship, poor quality materials and incorrectly fitted fixtures like shower heads and drains can contribute to water buildup in joints and areas behind the surround.

Water infiltration can lead to water damage, mold and mildew growth, and other potential problems. If a tub surround is properly installed, sealed, and maintained properly, the chances of it leaking are greatly reduced.

If you suspect your tub has been leaking, a quick inspection can reveal telltale signs like discolored walls and failing grout. In addition, you should also be sure to check behind the surround at least once a year to make sure there are no hidden surprises.

What are the pros and cons of Bath Fitter?

Pros:

1. Bath Fitter offers quick, one-day installation that is affordable and less disruptive than a full bathroom remodel.

2. Products come with a lifetime warranty, giving users peace of mind in case of any defects.

3. Bath Fitter adds value to your home, as it provides a more aesthetically pleasing bathroom that is both functional and stylish.

4. Tons of product selection and customization options, allowing users to create the perfect bathroom for their specific needs.

5. Products are made with durable acrylic materials that are easy to keep clean and are water-resistant.

Cons:

1. Installation of some products may require more than one day, depending on complexity of the job.

2. Selection and customization options may limit certain design requests.

3. Acrylic materials may be difficult to repair if they are cracked or damaged.

4. Bath Fitter products are more expensive than some other brands.

5. If a customer cancels their order or has a warranty claim, they may incur cancellation fees or pays shipping costs.

What is better a tub surround or tile?

The answer to this question really depends on personal preference and the particular needs of the room in which the surround or tile will be installed. Both tub surrounds and tile offer some attractive benefits that make either a good choice.

Tub surrounds are made of a solid sheet of plastic-like material, making them easier to install than tile, especially for someone who is inexperienced with tiling. They are also more affordable and require less maintenance over time than tile.

If you are looking for something low-maintenance and budget-friendly, then a tub surround may be the better option for you.

Tile is very durable and customizable, making it a popular choice for many. It is slightly more expensive than a tub surround and a bit more labor intensive to install. The main benefit of tile is that there are many different styles and designs to choose from.

You can also mix different shapes and colors to create a unique look. If you are up for the challenge and want a modern, more stylish look, then tile is probably the better choice.

In the end, it really comes down to personal preference. Consider the installation process, cost, and desired aesthetic of the room before making your decision.

Does mold grow under Bath Fitter?

No, mold does not typically grow under Bath Fitter, as Bath Fitter products are made with a seamless, grout-free construction that eliminates areas where mold and mildew can take root. Their products also have an antimicrobial barrier that prevent the growth of mold, fungus, and other microorganisms.

In addition, Bath Fitter products are designed with acrylic, which is extremely durable and resistant to water damage. This material is naturally bacteria and mold resistant, making it an ideal material for a variety of bathroom needs.

Finally, Bath Fitter also offers surface protectant treatments that help resist and protect against the formation of mold, mildew, and other microorganisms and contaminants.

How long does Bath Fitter last?

Bath Fitter products are engineered and manufactured with the highest degree of quality and to exacting standards. We back our products with a Lifetime Limited Warranty, which guarantees that all products are free from defects in material and/or workmanship.

In addition to the warranty, our products are made using times tested, patented materials. Our acrylic walls and base are fabricated using Lucite acrylic and Mitrex solid surface, designed for a lifetime of dependable performance.

Our Premium acrylic material and solid surface are both naturally mildew, stain and wear-resistant, endurance tested and guaranteed never to turn Yellow or Fade, ensuring years of enjoyment.

Our extensive experience in the industry allows us to offer a 10-year limited Warranty on our acrylic products. The 10-year limited warranty covers all acrylic products, including our showers, tubs, walls and all accessories, to be free from defects in materials and/or workmanship.

This includes the Lucite and Mitrex materials we use, ensuring that your product will last a lifetime.

What is the difference between Rebath and Bath Fitter?

The primary difference between ReBath and Bath Fitter is the process they use to install bathroom fixtures. ReBath is an installation and remodeling service that specializes in complete bathroom renovations.

They provide a range of services, such as tub and shower replacements, wall surrounds, countertops, and vanity and storage options. As part of their process, they will remove your old fixtures and replace them with brand new ones.

The only thing that isn’t replaced is the bathtub.

Bath Fitter, on the other hand, is a one-day installation service that specializes in installing acrylic bathtubs and wall surrounds. They are also skilled at trim work and customizing the style to fit your home.

They use a specific installation process that involves sliding an acrylic bathtub and/or wall surround over your existing fixtures. This is an ideal solution if you’re looking to update or refresh your bathroom without the expense of a tear-out and renovation.

In summary, the main difference between ReBath and Bath Fitter is the installation process they use to install bathroom fixtures and the products they offer. ReBath specializes in complete bathroom renovations, while Bath Fitter specializes in installing acrylic bathtubs and wall surrounds over existing fixtures.

What material does Bath Fitter use?

Bath Fitter uses exclusive and patented acrylic material, which is specifically formulated for bathtub and wall systems. This material is flexible, durable, and easy to clean. It is combined with an acrylic-based adhesive that ensures adhesion without the need for separate primers or sealers.

Furthermore, it provides flexibility to waterproof joins and seals tightly around curves. The material is also infused with Silver Shield™ technology that contains antibacterial agents for a more hygienic bathing experience.

Can you make your own tub surround?

Yes, you can make your own tub surround! It is possible to create a tub surround yourself if you have some basic construction and carpentry skills. First you’ll need to measure the space around the tub to determine the size and shape of the surround.

You’ll then need to purchase the necessary materials such as plywood, tileboard, cement board, and waterproofing supplies. After that you’ll need to cut the plywood and the tileboard to size, and then install the tileboard using a hammer and nails.

After all the pieces are in place, you’ll need to install the cement board by screwing it into the wall studs. Finally, you’ll need to waterproof the tileboard with a sealant before grouting and tiling the surfaces.

With some patience and care, creating your own tub surround can be a rewarding and cost-effective project.

What are cheap tub surrounds made of?

Cheap tub surrounds are typically made of a variety of materials, such as fiberglass, acrylic, plastic and composites. Fiberglass is a cost-effective option, and tub surrounds produced with this material are usually light-weight and easy to install.

They come in many colors and finishes, have good durability and require minimal maintenance. Acrylic, plastic and composite materials also give you an inexpensive alternative for tub surrounds, and ensure a waterproof seal.

These materials are all easy to clean, and are available in a range of colors and styles. The most cost-effective among these materials is always plastic, as it is lightweight and very durable. However, some experts suggest that it may not be the best choice if you’re looking for a high-end look.

How do you build a tub surround?

Building a tub surround is a great way to remodel a bathroom, providing a new look without the higher costs associated with a full remodel. Here’s a step by step guide to building the perfect tub surround:

1. Make sure to accurately measure the height and width of the tub opening prior to starting any project. This will ensure that the surround will fit properly, eliminating potential inefficiency during the process.

Building the frame and wall is the first step – use 1×4 wood furring strips to create a frame, and then staple or nail plywood sheets to enclose and seal the frame. You can also use large sheets of drywall, bolts, and wood screws to achieve the same outcome.

2. Check the integrity of the wall and frame created prior to continuing. If the wall is not perfectly sealed and the screws are not completely secure, there is a chance water will leak through to the walls of the bathroom.

3. After the wall has been checked, it’s time to add the new tile, stone, or other chosen material for the surround. Apply mortar onto the wall according to manufacturer’s instructions and then align the material to the wall using a level.

Leave at least 1/4 inch of an air gap between the material and the wall, as well as between each piece of the material.

4. Once the material is in place and the grout is dry, install the apron, or a small piece of material that goes around the edge of the tub. Make sure the apron is properly sealed and screwed in; it should be part of the tub surround.

Finally, replace the faucet and all necessary hardware, fixtures, and accessories, and then seal all necessary seams with silicone or other waterproof material.

Though the process of building a tub surround seems like a daunting task, taking the time to measure and check the frame, wall, and apron before applying the material will ensure long time satisfaction with the result.

What material is Vikrell?

Vikrell is a material that is made by Sterling, a company that produces a variety of premium bath, shower and kitchen products. It is a solid, non-porous material that is highly resistant to stain, moisture and impact.

Vikrell is made up of three layers: a durable vinyl base, a reinforcement core and a high-gloss acrylic finish. It is available in a variety of solid colors and it is specifically designed for shower and bath surfaces.

It is also mildew, rust and stain resistant, making it an ideal material for tubs, showers and other wet environments. It is easy to maintain and clean, with a simple soap-and-water solution. It is backed by a lifetime warranty that ensures its quality and durability.

How do I make a tub skirt?

Making a tub skirt is an easy and affordable way to instantly upgrade the look of your bathroom. All you need is a few materials and some basic sewing skills. Here are the steps for making your tub skirt:

1. Measure the outside circumference of your tub and the height of the side panel. Cut the fabric to twice the measurement of the circumference. Cut the side panels to the height measurement with a 2 inch allowance.

2. Sew the fabric together along the circumference to create a large circle.

3. Sew the side panels to the main piece, leaving a 2 inch allowance on each side.

4. Trim any excess fabric.

5. Sew a casing along the top of the skirt. This is where you will insert the elastic to secure the skirt to your tub.

6. Secure the elastic to the skirt by itself and then firmly hand stitch it in place.

7. Hang the skirt on the tub, securing the elastic firmly on the top and then tucking the sides of the skirt under the tub.

And voila! You now have a custom made tub skirt. With a few easy steps and a bit of creativity, you can easily upgrade the look of your bathroom in no time.

Can you put a tub surround over existing tub?

Yes, it is possible to put a tub surround over an existing tub. It’s important to make sure the surface of the existing tub is strong and even before installing a tub surround. Installing a tub surround over an existing tub typically requires a few steps.

The first is to make sure the original surface is even. Gaps, cracks and uneven surfaces should be smoothed out before the tub surround is installed. Then, the area needs to be waterproofed to prevent mold, mildew and water damage.

After that, the surround can be attached to the surface of the existing tub using nails and a caulking gun. In most cases, it’s a good idea to hire a professional to install the tub surround, as it’s a fairly technical operation that requires knowledge and skill.

With the right precautions and installation technique, a tub surround can be successfully installed over an existing tub.

Can you cover a tub with another tub?

Yes, it is possible to cover a tub with another tub. This can be done by placing the second tub on top of the first one and then securely attaching it to the wall, floor, or ceiling. It is important to make sure the two tubs are properly aligned and secured so that water can not run from one tub to the other, as this could create a safety hazard.

With the proper installation, the second tub will act as a cover for the first and can help to insulate and protect it. Additionally, the two tubs can be used as a type of dressing or changing room, allowing you to stay warm and dry after your bath.

Do you put drywall behind a tub surround?

Yes, it is recommended to put drywall behind a tub surround. The drywall serves as a fire-resistant barrier between the tub and other combustible materials, and also provides structural support and a smooth surface for the installation of the surround.

To ensure adequate protection, drywall should be installed directly to the framing, and caulking should be used to create a reliable seal between the tub and the drywall. It is also important to waterproof the drywall prior to tiling or installation of the surround.