Skip to Content

What kind of motor is Craftsman weed eater?

The Craftsman Weed Eater utilizes a two-cycle engine, often referred to as a two-stroke engine. This type of engine does not require a separate oil system for lubrication like a four stroke engine does.

Instead, it works by mixing the fuel and oil together before it is injected into the engine cylinder. This method requires a precise oil to fuel ratio that is usually found printed directly on the gasoline container.

Common ratios range from 16:1 to 50:1, depending on the model of the Craftsman Weed Eater. The two-cycle engine also creates more pollution than a four-cycle due to the unburned fuel being expelled both through the exhaust and via an air/fuel mixture.

This type of engine is generally used in handheld garden tools such as trimmers, chainsaws, and blowers.

Where are Badger weed eaters made?

Badger weed eaters are made in the United States of America. Badger is a brand owned by Advanced American Technologies, Inc. , which is a privately-held manufacturer and marketer of outdoor power equipment.

Their products are made in their manufacturing facility located in Germantown, Wisconsin. Badger specializes in the design, manufacture, and distribution of weed eaters and string trimmers of all kinds.

They use high-performance engines and durable materials when crafting their products to ensure their tools are dependable and reliable. In addition, they offer a wide range of models in the Badger Series with features like variable and variable speed, power, and quiet operation.

Who manufactures Troy Bilt string trimmers?

Troy-Bilt string trimmers are manufactured by MTD Products Inc. , a global leader in outdoor power equipment with over 90 years of experience in designing and building durable, easy-to-use outdoor power equipment.

Since their founding in 1932, MTD has grown from a small family owned business to a global manufacturing powerhouse with thousands of products and facilities in over 40 countries around the world. Troy-Bilt products are cherished for their classic design, powerful performance, and reliable service.

Their string trimmers are renowned for their professional-grade trimmer heads and BrushCut blades that make trimming effortless and efficient. From lightweight radius trimmers to robust gas-powered straight shaft trimmers, Troy-Bilt’s lineup has something for every yard, garden, and patio.

With a Troy-Bilt string trimmer, you can keep your yard neat and well-groomed all season long.

How do you change the string on a Craftsman Weedwacker?

To change the string on a Craftsman Weedwacker, you will need to start by locating the pull cord. Once you have located the pull cord, you will need to depress a release button located near it. This will help to loosen the spool from its motor housing, and allow you to remove the empty spool in order to replace it with a new one.

Next, you will need to roll the new string onto the spool while ensuring it runs in the same direction that the previous string was. Once you have completed this process, you will then need to place the new spool back into the motor housing with the string protruding through the slots.

Press down on the spool firmly to make sure it’s secure, and then use a pair of pliers to restrain the string at the edges.

The next step will be to pull the string out until it is fully extended. This can sometimes be a bit tricky, as the spool may become jammed. If this happens, simply take a pair of pliers and squeeze the two halves of the spool together to release it.

Once you have successfully extended your string, you will need to check and make sure the tension is correct. You can do this by giving the trimmer head a gentle pull away from the motor housing, which should cause the string to extend slightly.

If the tension is correct, the string should spring back to its original position.

Finally, you will simply need to set the weed wacker back onto its housing while being careful not to get the trimmer head caught up in the motor. Once it’s back on its housing, your Craftsman Weedwacker is ready to go with a fresh string ready to cut.

How do you restring a craftsman string trimmer?

Restringing your Craftsman string trimmer is an easy process. First, shut off the trimmer and disconnect the spark plug wire. Then, hold the trimmer with the blade pointed away from you. Remove the trimmer head so you can access the spool of line.

Next, remove any remaining line on the spool. If the line is stuck, use needle-nose pliers to pull it off. Now, measure and cut the amount of line that the trimmer requires. Make sure the line is strong and free of any knobs or breaks.

If the trimmer is a dual line model, you will need two separate lengths of line.

Cut the line to the appropriate length and then put one end of the line through the eyelet of the trimmer head. Wind the line onto the spool. Leave a ½ inch of space in between each wind. Depending on the trimmer, you may have to go around the spool multiple times, winding in the opposite direction each time you make a pass.

When the spool is full, tie the end of the line to the inner hole at the center of the spool. Then, press the spool back into the trimmer and secure it.

The last step is to reattach the trimmer head. Place the head on the drive spindle, and then tighten the knob on the trimmer head until it is secure. Finally, reattach the spark plug wire, and your trimmer is ready to use.

How do I change trimmer line?

Changing trimmer line is an easy process, and it’s important to do so regularly in order to keep your trimmer in good condition and ensure it works safely and effectively. Here’s how to do it:

1. First, identify what type of string or line you’ll need to replace your existing line. You should be able to find this information in the user manual or on the trimmer itself.

2. Raise the trimmer head to make the spool more accessible. This can usually be done by either pulling up a lever or turning a knob.

3. Cut a piece of the new line that is the same size as recommended by the manufacturer.

4. Next, pull out the old line and remove any debris that is stuck in the spool. Be sure to clean any small pieces of line that are stuck in the head.

5. Now you’re ready to thread the new line in the spool. Begin by feeding one end of the line through an eyelet in the spool holder, and then out the other side. The eyelet is usually slightly higher than the rest of the line holding area.

6. Once you’ve fed the line through, you can begin inserting the new line until it is tightly wound onto the spool. Be sure to leave a small amount at the end for pulling.

7. Finally, secure the line by either pushing the cover back into place or locking the reel. You may need to insert the end of the line into a notch when you lock the reel.

And voila! You’re done. It’s important to check the line regularly to ensure it’s in good condition. If it is frayed or worn, it’s time to change it out again.

How do I know what size weed eater string I need?

Figuring out the size of weed eater string you need depends on the make and model of your weed eater. You can typically find this information in the instruction manual that came with the equipment or on the manufacturer’s website.

If you no longer have access to the manual, you can also try looking for a label or stamp on the body of the weed eater or inside the guard or spool housing. The size may be indicated on stickers or molded into the plastic.

In some cases, you may need to measure the line to determine the correct size.

It is generally recommended to use the same type and size of string that was originally supplied with the weed eater. If you are unable to find the original line size, you can start by assuming a standard gauge.

For most household trimmers, a size. 065” to. 085” is a good starting point. If this size doesn’t fit, you can gradually increase the size until you find the correct fit. Be sure to check the manufacturer’s guidelines before making any purchases to ensure that you are using the correct size and type of string.

What is round trimmer line?

Round trimmer line is a type of string or cord that is used in cutting grass and other vegetation with a string trimmer. It is made from a variety of materials, including plastic, metal and other synthetic fibers, and comes in a variety of sizes and shapes.

The most common shape is a round one but other shapes such as squared, twisted, and multi-sided trimmer lines are also available. Different materials offer different advantages and disadvantages, with plastic lines being the most cost effective, metal lines offering the most durability and synthetics offering the best cutting performance.

Depending on the type of vegetation and terrain that needs to be cut, the size and shape of trimmer line used will vary. For thick, tough vegetation and rough terrain, thicker and stronger trimmer lines are recommended while lighter and thinner lines are better suited for light work.

Is trimmer line Colour coded?

Trimmer line is not typically colour coded, primarily due to its thin nature and consistent design. However, some trimmer line manufacturers may use colour-coded line to denote strengths. For instance, a green trimmer line may indicate a medium power line for standard duty applications and a red trimmer line might indicate a higher power line to be used for thick vegetation.

In general, trimmer line should be replaced with line of the same type, size and strength as the original packaging. The majority of trimmer line comes in black, green, red and orange, however, not all brands will offer the same colour selection.

Shopping by the size and type of the trimmer line is the easiest way to ensure that you choose the right line for your trimmer.

Does it matter what size weed eater line?

Yes, it does matter what size weed eater line you choose for your trimmer. Different trimmers have different line sizes and it is important to choose the right line size for your trimmer. Generally speaking, the heavier the line, the more durable it will be and will require less frequent replacement.

Heavier line can also handle tougher jobs and thicker weeds better than lighter line. Typically, the larger the diameter of the line, the heavier it is. If your trimmer has a larger diameter line, then it will require more power from the trimmer’s engine and might cost more to replace.

On the other hand, a lighter line will be more cost effective and able to get the job done for lighter jobs. If you are not sure what size line fits your trimmer, it’s best to consult the owner’s manual of your trimmer.

How do you load a fixed line trimmer head?

To load a fixed line trimmer head, you’ll need to pay close attention to the manufacturer’s instructions. Generally, you will need to remove the cover from the head and discard any remaining old line.

Then, thread and knot one piece of fresh trimmer line at a time through the trimmer head, starting from the pre-made holes. Once both lines are in place, pull the ends of the lines through the pre-made holes in the opposite direction of the arrow on the trimmer head, then tie the lines together in a knot.

After that, you can cut away the excess trimmer line and reattach the trimmer head cover. Finally, you may have to re-adjust the tension on the trimmer cutting head so that the trimmer lines are spinning at their optimal speed.