Nvidia ShadowPlay can record gameplay at various resolutions and frame rates, depending on the user’s hardware and preferences. On a GeForce GTX 600 series card and higher, ShadowPlay can record at resolutions of up to 1920×1080 (1080p) at either 30 or 60 frames per second (fps).
ShadowPlay can also record in resolutions of up to 3840×2160 (4K), but the frame rate is limited to 30 fps.
For users with a 900 series and lower, ShadowPlay can record at resolutions up to 2560×1440 (1440p) at 30 or 60 fps. Other resolutions, such as 2048×1536, 1600×900 and 1280×720 may also be available, depending on the user’s hardware setup.
How do I record ShadowPlay 1080p?
To record ShadowPlay in 1080p, you will need an NVIDIA graphics card that is compatible with the GeForce Experience software. Additionally, your PC will need to meet the recommended system requirements for ShadowPlay, which includes an Intel Core i5 or better processor and 8GB of RAM.
Once you have installed the GeForce Experience software and connected your supported NVIDIA graphics card, you’ll need to open the GeForce Experience program and navigate to the ‘Preferences’ tab. From here, you can select the ‘ShadowPlay’ tab to access the ShadowPlay preferences.
Make sure the ‘Record in the background while I’m playing a game’ option is enabled, and then use the ‘Recording Quality’ selection to set the resolution to 1080p. Once these settings are established, you’ll be ready to begin recording your gameplay in 1080p.
Finally, you can start game recording with ShadowPlay by pressing ‘Alt + F10’ on your keyboard. This will begin the ShadowPlay overlay and will begin recording to the designated folder, which can be changed in the ‘Preferences’ section.
When you’re finished recording, simply press ‘Alt + F10’ again and the recording will stop. The video will be saved to the designated folder in high-definition 1080p quality.
Is ShadowPlay or OBS better?
It really depends on what you are using the streaming or recording software for – which may be the deciding factor in what is the better option for you.
ShadowPlay is part of NVIDIA’s GeForce Experience software suite and is only available on computers that use NVIDIA video cards. It offers low-latency and low-CPU usage recording and streaming capabilities, with pro-level features that include the ability to create a highlights reel, customizable streaming menus, audio mixing, and more.
OBS is free and open-source, cross-platform software with a wide range of features and plugins to extend its capabilities. OBS allows users to have direct control over where and how they stream and record and is quite versatile in what can be done.
However, while it can produce high quality results in experienced hands, achieving the same levels of performance as ShadowPlay can require increased CPU usage and customizing.
In the end, it really comes down to your personal preference and needs. ShadowPlay allows for automated, low-CPU-usage recording, streaming, and sharing with a suite of professional-grade features for a slightly more hands-off experience.
For more advanced users, however, OBS provides immense customization and control over your capture.
How good is Nvidia Shadowplay?
Nvidia Shadowplay is a great option for gamers who are looking to record and share gameplay. It is user-friendly and works with the latest Nvidia GeForce graphic cards. It offers several value-adding features, such as an in-game overlay toolbar, which allows gamers to easily record, stream and take screenshots.
Furthermore, it allows gamers to stream their gameplays directly to Twitch or YouTube Live. Shadowplay can also capture up to 4K resolution at 60 frames per second, and also allows gamers to add a mic to their streams.
It is also optimized for low system resource usage, and does not affect gaming performance. Additionally, Shadowplay has low latency, with the chance for input lag minimized or completely eliminated.
All in all, Nvidia Shadowplay is an excellent option for gamers who are looking to record and share their gameplay.
How do I fix sound quality on GeForce Experience?
If you are having sound quality issues with GeForce Experience, there are several different things you can try.
1. Update your NVIDIA drivers. This can often help resolve issues with sound quality, as new drivers may contain improvements or bug fixes. You can update your drivers from within GeForce Experience by going to the ‘Drivers’ tab in the interface.
2. Check your hardware and settings. Ensure that the hardware you are using for sound output is in good working order, and that all the settings are correct. Check the manual that came with your hardware for instructions on proper setup.
3. Disable other sound related programs. Some programs such as audio moderators or certain plug-ins may conflict with GeForce Experience and reduce sound quality. Check to make sure there are no other programs running while you are using GeForce Experience.
4. Check your audio settings. Make sure that the correct audio device is selected in the NVIDIA control panel. Additionally, look for advanced Audio options such as Dolby Digital or DTS, and make sure they are correctly enabled and configured.
5. Try using other audio applications. If GeForce Experience is still producing poor sound quality, try using a different sound application such as Windows Media Player or a different media player. This will help you determine if the issue is with GeForce Experience or if it is a system-wide problem.
By following these steps you should be able to resolve any sound quality issues you may be having with GeForce experience.
Why is Shadowplay recording the wrong monitor?
The most common reason that Shadowplay is recording the wrong monitor is because it is incorrectly configured. Shadowplay defaults to monitor 1, but devices and programs can change the primary monitor from 1 to 2, or vice versa.
To fix this issue, make sure that the desired monitor is set as the primary monitor in your display settings. Additionally, you may need to check the Shadowplay settings to ensure that the desired monitor is selected in the “Monitor” dropdown menu.
Finally, double-check that Shadowplay is set to “Capture Desktop” to ensure that Shadowplay is capturing both monitors. If the issue persists, try disabling any secondary monitors or disabling any additional capture programs that may be capturing your additional monitor instead.
Can you use Shadowplay with AMD?
Yes, you can use Shadowplay with AMD. Shadowplay is a feature in Nvidia’s GeForce Experience software, and it is available for both AMD and Nvidia GPUs. With this software, users can capture, stream, and share their gameplay with ease.
It makes recording and streaming your gameplay more efficient, and gives gamers access to an exciting array of features. Shadowplay supports various AMD GPUs, including the Radeon R9 Fury, Radeon RX 480 and Fury X.
It is important to note that the performance of Shadowplay may vary depending on the AMD GPU used, and its settings. Additionally, some features are tailored to Nvidia GPUs only and are therefore not available on AMD GPUs.
How do I fix ShadowPlay not recording my desktop audio?
First, make sure that you have the latest version of the GeForce Experience installed on your computer. Then, check your ShadowPlay settings to make sure that the desktop audio capture option is enabled.
Also, check to make sure that the ShadowPlay microphone capture option is not enabled as this can interfere with the desktop audio capture. Additionally, try setting the default audio playback device in your sound settings to whichever one is currently set as the default output device in ShadowPlay.
Finally, you can try toggling the ShadowPlay microphone boost setting in the advanced audio settings window. If these steps do not fix the issue, you may have to reinstall GeForce Experience or update your audio drivers.
How do I change ShadowPlay recording settings?
If you’re looking to change the ShadowPlay recording settings, it’s actually really easy. The first step is to open up your NVIDIA Control Panel. If you’re not sure how to do this, simply right-click anywhere on your desktop and select the “NVIDIA Control Panel” option.
Once you have it open, follow the following steps:
1. Select “Manage 3D Settings” on the left-hand menu.
2. Click “Program Settings”.
3. Select your game in the drop-down list and click “Add”.
4. Select “ShadowPlay” and choose “On”.
5. Click “Show advanced settings”.
6. Under the “Record Settings” tab, you can now adjust various recording parameters like the recording quality, the bitrate, and more to your preference.
Once you’ve made your changes, click “Apply” and you’re all set! Your ShadowPlay recording settings have now been successfully changed and you’re ready to start recording your gaming sessions.
How do I fix audio quality on ShadowPlay?
The first step to improve the audio quality of your ShadowPlay recordings is to ensure that all of your audio settings are optimized. This can be done by checking the Windows 10 Sound Settings in Control Panel, as well as the NVIDIA Control Panel and ShadowPlay Settings, which can be found in the GeForce Experience application.
In the Windows 10 Sound Settings, check that your playback device is set to your desired output, such as your headphones or speakers. You should also check that the Sample Rate and Bit Depth are set to at least 44100 Hz and 24-bit, respectively.
In the NVIDIA Control Panel, navigate to ‘Manage 3D Settings’ and then ‘Audio’. Here, you can ensure that the ‘NVIDIA Streaming’ setting is set to ‘Enabled’ so that ShadowPlay can record your audio. You should also switch the ‘Output format’ setting to ‘Compressed’, which should improve the audio quality.
Finally, open the ShadowPlay Settings and make sure that the ShadowPlay Audio slider is set to the maximum value and that the microphone capture setting is enabled. You can also switch the audio encoding from AAC to MP3, which should drastically improve the audio quality in your recordings.
If you experience stutters or lag during playback, switch the audio encoding setting to AAC instead.
By following these steps, you should be able to fix the audio quality of your ShadowPlay recordings and make them sound significantly better.
Does RTX voice work with Shadowplay?
Yes, RTX Voice can work with Shadowplay. It is available as a free download for Windows 10 and can be used to improve the audio quality for your recordings. To use RTX Voice with Shadowplay, you’ll need to enable it in the Shadowplay settings.
Select the “Audio” tab on the left, then check the “Enable RTX Voice” checkbox. You can then adjust the Mic Sensitivity and Don’t Forget to press “apply” to save your settings. You can also adjust settings like Vocals Reduction, Background Audio Remover and more to customize your audio output.
Once you have enabled and adjusted settings, Shadowplay will capture sound, with the quality enhanced by RTX Voice. This will make the sound in your recordings sound much clearer, enhancing the overall quality.
Why is my voice low in Geforce experience?
The first could be that your microphone volume is set low in the settings menu. To adjust your microphone volume, open Geforce experience, select Settings > Audio > Microphone Volume. You can then adjust the microphone volume by clicking and dragging the slider.
Another possible cause might be if your headset or microphone is too close to your mouth. Try adjusting the distance of your headset or microphone from your mouth, so it’s further away.
Finally, your voice could be low if there is too much background noise or other interference. Try to limit any extra noise by moving to a quieter area, or using noise-cancelling headphones.
If none of these suggestions help improve your voice quality, you may need to adjust the sound settings on your computer, or purchase a better quality microphone.
How do I fix my Nvidia microphone?
To fix your Nvidia microphone, you will need to first identify what is causing the issue. Common causes include drivers being out of date, hardware or drivers being defective or incompatible, and incorrect settings.
1. Update your drivers: The first step would be to make sure that the drivers for your Nvidia hardware are up to date. You can do this by going to the website for the manufacturer of your hardware and checking for new updates, or you can use a software like Driver Booster to auto-detect and install the latest drivers.
This should fix many issues with your Nvidia microphone.
2. Reinstall/rollback drivers: If updating the drivers did not solve the issue, try reinstalling or rolling back the drivers. This can be done by going to Device Manager, right-clicking on your Nvidia device, and selecting “Uninstall device”.
Then, open the website of the manufacturer and download the latest driver manually and install it. If that didn’t work, try downloading an older version of the driver and installing it.
3. Check settings: If the issue is still unresolved, go to Control Panel and open the audio settings page. Go to the recording tab, find your Nvidia microphone, and make sure it is enabled.
4. Try alternative solutions: If none of the above solutions worked, try using alternative solutions. For example, try using an external microphone, or a USB audio adapter.
5. Contact customer service: Finally, if all else fails, contact the customer service of the manufacturer of your Nvidia device. They may be able to help you troubleshoot the issue or provide further advice.
How do I use my mic on GeForce now?
To use your mic on GeForce Now, you will need to ensure your microphone is plugged in and connected to your device. Once your microphone is connected and ready to use, the next step is to open the GeForce Now application.
Once you have successfully launched the GeForce Now app, you will need to hover your mouse over the microphone icon in the upper right corner of the screen. You will then see the option to either enable or disable your microphone.
Make sure the microphone is enabled and you should see the microphone symbol turn green. Now when you communicate with others while streaming, they will be able to hear your voice.
How can I make my mic sound better?
To make your mic sound better, first you should check to ensure that your mic and recording software are properly set up. If everything is in order, then start by recording in a quiet, acoustically treated room with minimal background noise.
Set the recording level to an appropriate level, using a peak meter if possible, and adjust the microphone’s polar pattern and distance of placement to reduce plosives, pops, and other unwanted sounds.
You can also try adding a foam windscreen or a pop filter in front of the mic for further protection. Additionally, you may want to use soundproofing or noise reduction tools to remove any background noise that cannot be avoided.
Finally, you can also try adding compression, EQ, and other effects to refine and enhance the tone of the recordings.
Is RTX voice worth using?
The short answer is: it depends. RTX Voice is a free software created by NVIDIA that allows you to reduce background noise in your audio, including noise from music and other environmental sounds. Depending on your personal needs, RTX Voice may be worth using, as many users have reported impressive results.
In general, RTX Voice can help dramatically reduce the effect of distracting noise on audio recordings and streams, making it more pleasant to listen to. With RTX Voice enabled, you can record and listen to more dynamic conversations without worrying about background noise.
It even works in tandem with other noise reduction tools, such as NVIDIA’s Deep Learning Super Sampling (DLSS), allowing you to further perfect the sound quality.
At the same time, however, RTX Voice does have its limits. It will not completely eliminate all noise, and it is not advised that you rely solely on the software to clean up your audio recordings. If the sound of your microphone is already good to start with, then RTX Voice can only improve it, but it won’t be able to help you drastically improve a poor microphone.
In the end, it all comes down to your personal needs and how much effort you want to put into improving your audio quality. If you already have a good microphone setup, then RTX Voice may be a great way to improve the sound quality even further.
If you need help cleaning up background noise in your audio, then RTX Voice is worth giving a shot. Ultimately, it’s up to you to decide if RTX Voice is worth using for your own needs.
Does RTX voice affect FPS?
No, RTX Voice does not affect FPS. RTX Voice is an AI-based noise-filtering software from Nvidia that allows users to “clean up” the microphone audio from their streams or recordings. With RTX Voice, the microphone audio is filtered out from the background noise so that you have higher quality audio.
RTX Voice does require the use of an Nvidia RTX GPU to use, however the use of the software does not affect your FPS or performance. While you do need to enable the software, RTX Voice is designed to only run in the background without taking up GPU resources, and it won’t make any noticeable difference to your FPS.
How do I use RTX voice on GTX?
Unfortunately, RTX Voice is only available on RTX GPUs, so it is not possible to use RTX Voice on a GTX GPU. RTX Voice is designed to work with RTX GPUs and their AI Computing capabilities, which a GTX GPU does not have.
RTX Voice requires the use of a compatible RTX GPU to take advantage of their AI processing architecture. If you are looking to use RTX Voice, you will need to invest in an RTX GPU that supports RTX Voice.
How does Nvidia RTX voice work?
Nvidia RTX Voice is a new noise cancellation technology developed by Nvidia that works with RTX enabled GeForce and Titan series graphics cards. This technology filters out irrelevant background noise so that the user can be heard more clearly and easily.
RTX Voice utilizes deep neural networks to detect and filter out background noise like keyboard clacking, air conditioning, and traffic, while allowing the user’s voice to remain clear and crisp. With RTX Voice, users are able to communicate more effectively and confidently over programs like Skype, Zoom, and Teams.
The setup requires only a couple of simple steps and the installation of an RTX Voice plugin. Once that is complete, RTX Voice works autonomously and does not require any action on the user’s part. Thanks to its superior sound, RTX Voice creates a more immersive audio experience on conference calls, making it easier to have business or leisure conversations.