The size of the file that you need for a 3/8 pitch chain is a 5/32″ round file. This size file is fairly common and should be easy to purchase from any hardware store. When using the file, be sure to take care and follow the manufacturer’s instructions for sharpening the chain.
It is important that the file be kept in good condition to ensure the best results. Additionally, it is important to move the file evenly along the length of the chain in order to ensure that all of the cutting teeth are sharpened properly.
How do you sharpen a 3/8 chainsaw chain?
Sharpening a 3/8 chainsaw chain requires several tools and steps. First, you will need a 3/8 chainsaw file, a depth gauge guide, a flat file, a diamond file, and some sort of vise or clamp to secure the chain.
Begin by setting the depth gauge guide to the correct height of your chain and clamp the chain into the vise. Make sure the filing angle is correct, otherwise the chain will not cut properly. Start by using the flat file to remove the burrs and stray metal pieces in the cutter.
Next, use the 3/8 file to sharpen each cutter. Make sure to keep the file at a consistent angle while filing and always file in the same direction. Once complete, use the diamond file to smooth the edges of the cutters.
After each filler is complete, check to see that both sides of the tooth have been filed evenly. Finally, check to see that the depth gauge has been properly set with a depth gauge tool or a gauge block.
If necessary, make adjustments with the depth gauge guide. With patience, following these steps will result in a sharp and accurately set 3/8 chainsaw chain.
What size saw file do I need?
The size saw file you need depends on the type of saw and the size of the teeth. If your saw is a hand saw, then you should use a size #4 file for all standard tooth sizes, or a 5 for larger tooth sizes.
For a miter saw, to sharpen the teeth you’ll need a different sized file depending on the size of the teeth – #1 for a 10-inch blade, #2 for an 8-inch blade, #3 for a 6-inch blade, and a #4 for a 4-inch blade.
For a circular saw blade, you’ll need a #7 file for sharpening. Generally, if you’re buying a saw file, size #4 is the right size for most saws. The size of the file should be marked on the packaging.
It is important to use the right file size, as using the wrong size could damage the blade or result in an inaccurate cut.
How do I know what size file to use to sharpen my chainsaw?
When determining what size file to use to sharpen your chainsaw, there are a few factors to consider. The first is the pitch of the chain. Most chains have a standard pitch of either 1/4”, 3/8”, or 0.325”.
Depending on the pitch, you will need a specific file size to properly sharpen the chain. Common file sizes for a 1/4” pitch chain are 3/16”, 7/32”, and 5/32”. For a 3/8” pitch chain, the common file sizes are 5/32”, 3/16”, and 7/32”.
Lastly, for a 0.325” pitch chain, the file sizes commonly used are 5/32”, 7/32”, and 11/64”.
Additionally, the size of the teeth on your chain should also be taken into consideration. This is usually indicated by the gauge size of your chain, as larger gauge chains require a larger file size for proper sharpening.
Common gauge sizes are. 050”,. 063”, and. 075”. You can also find out the gauge size of your chain by looking at the writing on your chain or consult the chainsaw’s owner’s manual.
Finally, the type of file you are using is important. Most chains use a round file, but other types like flat or taper files may also be used to sharpen chains. Be sure to select the proper type of file for your chainsaw.
By considering the pitch, gauge size and type of file, you will be able to determine the best size file to use to sharpen your chainsaw.
What is 3/8 pitch on chainsaw chain?
3/8 pitch on a chainsaw chain is a standardized measurement that is used to identify the size of the chain drive links. It represents the distance between 3 consecutive drive links, measured from the center of one drive link to the center of the next.
The 3/8 pitch is the most commonly used size on modern chainsaws and is used for both standard and low-kickback chains. Chains with a 3/8 pitch have 0.043 inch (1.1mm) gauge which is the thickness of the drive link where it meets the cutter.
Chains with the 3/8 pitch usually have 56 to 66 drive links and 5, 7, 10, or 20 cutting teeth respectively. It is important to note that not all chains both for the 3/8 pitch will fit all chainsaws as machines are often designed to have a specific pitch.
Therefore it is critical that you check your saw’s manual to make sure you purchase the correct size of chain saw chain for your machine.
Does any chain fit any chainsaw?
No, not any chain will fit any chainsaw. The chain size and gauge has to be determined by the make and model of the chainsaw. Size includes pitch, gauge and the number of drive links. The size is usually stamped on the drive link.
A chain that is too large or too small can cause serious damage to the chainsaw and operator. It is also important to use the correct type of chain for the application for a particular chainsaw. Chains for ripping, cross-cutting and cutting frozen wood require different gold and tooth designs.
Without the correct-size and type of chain, the saw will be less efficient and can cause kickbacks.
How can I tell what chain my chainsaw is?
You can tell what chain your chainsaw is by looking at the markings on the chain itself. The markings will generally include information such as the manufacturer, the pitch, the gauge and the carriage set.
You can also check your owner’s manual, as some models may have specific requirements for chains. In some cases, you may need to purchase a specific chain for your saw, which should be based on the specific motor of your saw.
Additionally, some chains may require additional measurements to ensure it fits properly. Be sure to get the correct information from the manufacturer, dealer or your manual before purchasing a chain for your saw.
Can I use a Husqvarna chain on a Stihl chainsaw?
Yes, it is possible to use a Husqvarna chain on a Stihl chainsaw in some cases. This can be done by ensuring that the pitch and gauge of the two chains match up. The pitch of the chains must be the same, meaning that the distance between any three consecutive rivets must be the same.
The gauge also has to be the same. The gauge is the width of the drive link that fits in to the groove of the guide bar. When the pitch and gauge match up, it is possible to install the Husqvarna chain on a Stihl chainsaw.
However, it is always advisable to double-check with the manufacturer or a professional before attempting this.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain is that 3/8 chain uses a larger pitch than. 325 chain. The pitch is the distance between drive links, and the larger pitch of 3/8 chain means that it can handle more load and cut through thicker materials.
It can also travel over sprockets faster, which helps reduce wear and tear. Other than the pitch, 3/8 chain is also thicker and heavier than. 325 chain. It has longer, wider drive links that are capable of handling more severeduty applications.
Additionally, the chainsaw engine must be capable of handling more power output with 3/8 chain, as the heavier chain requires more power from the engine to drive it.
Is 3/8 chain the same as 10mm?
No, 3/8 chain is not the same as 10mm. 3/8 chain is measured in fractional inches, while 10mm is measured in millimeters. 3/8 chain is equivalent to 9.525mm, which would be slightly smaller than 10mm.
What is a 3/8 LP chain?
A 3/8 LP chain is a low profile or short pitch chain, which is a type of chain drive commonly used in power transmission systems. It has a smaller pitch than other chain types, meaning it has a closer link design.
The inner and outer link plates of a 3/8 LP chain are shorter in length, which provides a more compact chain for applications where space is limited. The chain is most often used in conveyors and various packaging applications.
Furthermore, 3/8 LP chain is the preferred chain for applications involving very small sprockets and tight turns, such as bottle and can filling and sorting applications. The chain is also commonly found in many automotive applications, such as steering and suspension systems.