Skip to Content

What sizes do elongated toilet seats come in?

Elongated toilet seats come in a variety of sizes to fit different toilet manufacturers and models. Generally, they come in a standard size which fits most toilets. However, it is important to measure your existing toilet seat before purchasing an elongated one.

Most elongated toilet seats measure between 18 and 19 inches in length (from the seat’s front to the back). The width of the toilet seat is usually around 14.5 inches. The width and length of your toilet seat should be close to those measurements to ensure a proper fit.

If you’re looking for a very specific type of elongated seat, some manufacturers produce specialty ones which are designed for children, seniors, or those with special accessibility needs. As always, it’s vital to double-check your measurements before making a purchase.

How do I know which toilet seat will fit my toilet?

Figuring out which toilet seat will fit your toilet can be done in a few easy steps. First, measure the distance between the two bolts that attach your toilet bowl to the floor. This measurement will determine the width of the toilet seat you will need.

Be sure to measure in inches. Once you have that measurement, use that to determine your round or elongated toilet seat. Round seat widths are typically 16-18 inches, while elongated seat widths can range from 18-20 inches.

Next, you’ll want to measure the length front-to-back of the bowl itself. Again, be sure to measure in inches. This will indicate if you need an elongated toilet seat, which is typically 18-21 inches, or a standard size seat, which is approximately 16 inches.

Additionally, you’ll want to compare your toilet seat measurements to the dimensions listed on the product description of your desired seat. This will help ensure that you are selecting the right size seat for your toilet.

Once all measurements match, you will know you have the right size seat.

Will elongated toilet seat fit standard toilet?

Yes, an elongated toilet seat can fit a standard toilet. Elongated toilet seats are a bit longer than round toilet seats and also have a slightly different shape. However, they will still fit toilets with a standard 12” rough in measurement, because manufacturers account for the longer size when designing toilet seats.

To ensure an elongated toilet seat fits your toilet, measure the distance from the back wall of the toilet bowl to the center of the mounting bolts; this should be 12” for a standard toilet.

Do all toilet seats fit all toilets?

No, not all toilet seats fit all toilets. Toilet seats are produced in multiple sizes and shapes to accommodate a variety of toilet types and sizes, so you need to take careful measurements of your toilet before choosing a toilet seat to make sure your seat and toilet are compatible.

Additionally, each toilet seat is designed for a specific installation type, so you must make sure you choose a toilet seat installation type that is compatible with that of your particular toilet. Generally, there are three main kinds of toilet seat installation types: basic, round front, and elongated.

To determine which type of installation type your toilet requires, you should measure the shape and size of your toilet bowl. The shape and size of the toilet bowl will determine which type of toilet seat will fit.

Lastly, each toilet seat is installed with either screws or bolts. You should make sure the toilet seat you are purchasing is compatible with your toilet type and is secured with the right kind of hardware.

Are most toilet seats a standard size?

Most toilet seats are designed to fit the standard sized toilets. However, there are some variations in sizes because of the shapes and styles of the toilets. The most common sizes for standard toilets are 16.

5 inches in length and 14 inches in width, which is considered the traditional oval-shaped toilet. Some newer toilet designs, such as elongated toilets, extended rim chairs, and wall-mounted toilets, may require a different size seat.

Additionally, some toilet manufacturers offer ‘universal’ toilet seat that are designed to fit all varieties of toilets regardless of the shape or size.

What are the different toilet seat hinges?

There are many different types of toilet seat hinges available, each offering its own style, finish, and benefits. The most common types are:

• Plastic hinges: Plastic hinges are the most economical option for your toilet seat and can be found in a wide range of colors and styles. They may not be as durable as metal but typically last several years.

• Metal hinges: Metal hinges are more durable than plastic and offer a variety of finishes to choose from. They are usually made of stainless steel, brass, or aluminium and can be either exposed or concealed.

• Soft-close hinges: Soft-close hinges are designed to gently close the toilet seat lid and can be found in both plastic and metal varieties.

• Quick release hinges: Quick release hinges are a great choice if you want to easily remove your toilet seat for cleaning and access underneath.

• Elongated hinges: Elongated hinges are designed for larger toilet bowls, extending beyond the bowl to fit elongated shaped seat.

• Steel-Ball-Bearing (SBB) hinges: Steel-Ball-Bearing hinges are designed for added strength and stability. They are typically found in commercial toilets and provide extra durability.

No matter what kind of toilet seat and hinges you choose, it’s important to select one that fits properly. Ensure the seat fits securely and securely fastened to the toilet bowl before using.

What is the difference between elongated and round toilet seats?

The primary difference between elongated and round toilet seats is the shape of the seats themselves. An elongated toilet seat has a much longer shape than a round toilet seat, which has a circular shape.

This difference in shape affects the overall fit of the toilet seat.

Elongated toilet seats are typically found in larger bathrooms, and they often fit better with larger toilet bowls. They tend to be more comfortable than round seats because they offer more seating area and tend to be better suited to taller people.

The elongated shape also produces a more secure fit than a round toilet seat which can move around on the bowl.

Round toilet seats, on the other hand, are typically found in smaller bathrooms, and they are often preferred by those who are shorter and have a smaller toilet bowl. They are easier to install and take up less space.

However, they can be less comfortable than an elongated seat and may not provide as secure a fit.

How do you replace a toilet seat?

Replacing a toilet seat is a simple repair that should take only around 15 minutes to complete. Here are the steps to follow:

1. Turn off the water supply. This step is essential to ensure that there will be no water coming out while you make the switch.

2. Disconnect the old seat. You’ll need to unscrew the bolts that secure the seat to the bowl. If the bolts are difficult to remove, try applying some lubricant or a wrench.

3. Measure the opening of the bowl. Make sure that the opening is the same size as the new seat. If it’s not, you’ll need to buy a new seat that fits the opening correctly.

4. Attach the new seat to the bowl. Use the screws that come with the new seat or the old ones. Make sure to tighten them securely, but not too tight or else you may crack the porcelain.

5. Turn on the water supply. Test the new seat to make sure it’s secure and functioning correctly.

Finally, if you don’t feel comfortable replacing the seat yourself, you can always call a plumber to make sure it’s done correctly!

Are elongated toilet seats different sizes?

Yes, elongated toilet seats come in different sizes. The two most common sizes are round and elongated. Round seats measure about 16.5 inches from the front of the seat to the back of the toilet bowl, while elongated seats measure about 18.

5 inches from the front of the seat to the back of the bowl. However, most toilet seat manufacturers offer a variety of sizes, usually in increments of half an inch. When measuring and buying a toilet seat, it’s important to consider the size of the bowl, as this can determine if you need to purchase a round or elongated seat.

To determine the right size of the seat, measure the distance from the front of the bowl to the center of the mounting holes. This measurement should match the size indicated on the toilet seat packaging.

If you have any questions or doubts about the size of your toilet seat, it’s best to double-check with the manufacturer.

Are all oblong toilet seats the same?

No, all oblong toilet seats are not the same. Oblong toilet seats come in different shapes, sizes, and materials. Some oblong toilet seats are round-fronted and some are elongated, depending on your preference and the size and shape of your toilet.

Additionally, oblong toilet seats can be made of plastic, wood, metal, or other materials. The type of material and color you select will determine the look and feel of the seat, as well as its durability.

Each oblong toilet seat has its own unique design and may include features such as a soft-close lid, a slow-close hinge for extra safety, and other aesthetic or practical touches. Ultimately, when it comes to selecting an oblong toilet seat, there are many options to consider in order to find the one that is best for your bathroom.

What are the measurements of a standard toilet seat?

The measurements of a standard toilet seat typically depend on the specific model being used. Standard toilet seats typically measure between 15-18 inches in width, and range from 14 to 19 inches in length.

In terms of depth, standard toilet seats are typically 14-17 inches deep. The size of the toilet seat opening is designed to fit the average person’s body, typically measuring about 10-13 inches in width and 5-7 inches in length.

The height of standard toilet seats range from 15-17 inches from the floor, and the height of the lid typically ranges from 2-3 inches.

How do I know if my toilet is a 10 or 12 rough?

The best way to determine whether your toilet is a 10 or 12 rough-in model is to measure from the wall behind it to the center of the closet bolts. The toilet bowl should be positioned so the center of the bowl is 12 inches from the wall for a 12-inch rough-in model and 10 inches from the wall for a 10-inch rough-in model.

If you measure the distance and it is 12 inches, then it is a 12-inch rough-in toilet. If it is 10 inches, then it is a 10-inch rough-in toilet. Additionally, you can check the toilet’s water closet, or tank, to find the measurements that are stamped into the porcelain.

This will let you know the size of the toilet.

How do I know what size toilet I need?

In order to determine what size toilet you need, there are a few measurements you will need to take into consideration. The most important factor is the rough-in, which is the distance from the wall behind the toilet to the middle of the toilet drain.

This measurement will determine the size of the bowl you need to fit in the space. Generally, rough-in sizes are either 10 inches, 12 inches, or 14 inches. Toilet bowls range from 15 to 28 inches, with most falling in the 16 to 20 inch range.

You will also want to take into consideration the water line inlets near the floor that could limit the depth of the toilet. Additionally, it’s important to ensure that you choose a toilet that has adequate dimensions to provide enough space between the wall, tank and the toilet.

Once you have all the measurements you need, you’ll have a better idea of what size toilet will work best in the space, allowing you to narrow down your options and find the perfect fit.

What height is comfort height toilet?

Comfort height toilets, also known as Right Height toilets, are designed so that users do not have to sit as low as the standard toilets. The height of the bowl is generally 17 to 19 inches from the floor, which is at least 3 inches higher than the standard 14 to 15-inch height of a regular toilet bowl.

This higher toilet height allows the user to have a more upright posture while using the toilet while minimizing any strain placed on the lower back, legs, and shoulders. Comfort height toilets reduce the risk of standing up and straining resulting in a more comfortable experience.