The type of chainsaw chain that is most suitable for hardwood is a low-kickback, full-chisel chain. This special chain is designed to slice through hardwood more easily and efficiently. It has an aggressive cutting action, which allows for easier and faster cutting, but it also requires more effort from the user.
The full-chisel chain has deep, wide cutters, which help it slice through tough timber. Low-kickback chains provide extra safety when cutting hardwoods, as they have fewer kickbacks, which can be dangerous.
The low-kickback chain also has a shorter cutting length, which helps it stay sharper for longer on tough materials.
Will a chainsaw cut hardwood?
Yes, a chainsaw is capable of cutting hardwood. Chainsaws are typically driven by a two-stroke engine and are equipped with a long, sharp-toothed rotating chain that cuts through wood as it moves. Chainsaws are an effective and reliable tool for cutting through all types of wood, including hardwoods.
The type of chainsaw you use needs to be selected based on the size, hardness, and quantity of wood to be cut. Smaller chainsaws are suitable for cutting thinner pieces of wood, while larger, heavier chainsaws are recommended for cutting hardwood logs.
Chainsaws should be operated with safety precautions in mind, including wearing protective gloves, using safety glasses, and taking safety classes to learn more about safe chainsaw operation.
What is the difference between a semi and full chisel chain?
The difference between a semi chisel and a full chisel chain is in the way the links and cutters are formed. A semi chisel chain has rounder, more curved cutters and links, which makes them less aggressive but also longer lasting and simpler to maintain.
Semi chisel chains are mainly suited for wood cutting applications, because they produce less chips and sawdust than full chisel chains, and stay sharp for longer due to their curved shape. On the other hand, full chisel chains have sharper, straighter cutters and links, which makes them more aggressive but also more prone to kickback, so they should be used with extreme caution.
Full chisel chains are best for firewood cutting, large tree felling, and other aggressive cutting operations where an increased performance is needed.
What chainsaw chain cuts the fastest?
The Oregon PowerCut R50 ControlCut saw chain is widely considered to be the fastest cutting chainsaw chain on the market. This is due to its unique design, which includes overlapping and off-set cutter teeth that deliver extra-aggressive cutting performance and enable faster chip clearance.
Additionally, the wide cutters reduce the drag and wear on the chain and make it easier to stay on track during cutting. The PowerCut chain’s patented check gauge feature allows users to quickly and easily determine when it’s time to adjust the chain’s tension.
The PowerCut chain also features a patented LubriLink that keeps oil inside the saw chain while keeping out dirt and other potential abrasives, enhancing its longevity and cutting performance. Additionally, Oregon’s patented bumper drive link helps the chain run smoother and allows for easier cutting.
It’s also designed to give a smooth finish on the cut. The Oregon PowerCut R50 ControlCut saw chain is the perfect choice for professional users who are looking for a fast-cutting chain that also offers a smooth finish.
Why does my chainsaw chain get dull so fast?
The most common and likely problem is that the chainsaw is not being sharpened often enough and the chain has been ground down past its usable size. This usually happens when the chainsaw is used for a long period of time without being sharpened and can result in a chain that is too dull to use.
Additionally, improper maintenance could also contribute to the chain becoming dull, such as putting too much pressure on the chain when cutting, not lubricating the saw often enough, or dulling the teeth of the chain when sharpening.
Finally, if you are using a low-quality or old chain, it might be more prone to becoming dull quickly. Ultimately, the best way to keep your chainsaw chain sharp and in good condition is to properly maintain it and sharpen it regularly.
What’s better full chisel or semi chisel chain?
The answer to what type of chain is better, full chisel or semi chisel, really depends on the application being used. Full chisel chains are typically used in professional settings, such as logging and milling, where frequent sharpening of the chain is necessary for efficient and effective cutting.
The full chisel cutters offer the most aggressive cutting power, however they also require a greater degree of maintenance and frequent sharpening in order to remain effective. Semi-chisel chains offer a less aggressive cutting power, making them ideal for smaller cutting tasks such as gardening and pruning, where frequent sharpening is not required and where a longer period of effectiveness is desired.
The semi-chisel style of chain generally requires less maintenance, but does not offer the same cutting power as the full chisel. Ultimately, the user should assess their application and the desired output to decide which type of chain fits the needs best.
What is a full chisel chainsaw chain used for?
A full chisel chainsaw chain is a type of saw chain used for cutting wood and other materials with a chainsaw. This type of chain is made from hardened steel and contains sharp chisel-style ‘teeth’ which allow for deep, clean cuts in a variety of materials.
It is the most common type of chain used in chainsaws and is often used for general cutting tasks such as felling trees, removing branches, and in some cases also for milling logs. Full chisel chains provide a faster cut, improved durability, and longer longevity than semi-chisel chains, and can even help to reduce kickback during use.
Due to their design, full chisel chains are best used when precision cuts are not required, and are often the chain of choice for chainsaw users who require speed and efficiency.
How do you sharpen a semi chisel chainsaw chain?
Sharpening a semi chisel chainsaw chain is quite straightforward. To begin with, if your chain is brand new, you may not need to sharpen it at all. Some chains are designed to be used straight from the box and may stay sharp for the duration of an entire job.
However, if the chain is worn down or has become dull from use, you will need to sharpen it. The most effective way to sharpen a semi chisel chainsaw chain is by using a chainsaw sharpening kit. These are widely available and come with everything you need for sharpening a standard chainsaw chain.
You’ll need to first take the chain off your saw and attach it to the bar in the sharpening kit. This will then hold the chain in place while you work on it. Next, you’ll need to select a file that matches the size of the chain’s drive links.
Generally 4.5mm and 5.5mm are the standard sizes when it comes to semi chisel chainsaw chains. After selecting the correct file, you’ll need to use it to sharpen the sharp edges of the teeth on the chain.
Start with the inside cutters and work your way to the outside cutters. It’s important to hold the file at the right angle to get a good edge on the tooth. Generally, with a semi chisel chainsaw chain, this angle should be between 20 and 30 degrees.
Continue filing the cutters in this fashion until they’re all sharp. Where possible, try to achieve the same level of sharpness across the chain. Once completed, check the tension on the chain and make sure its tight enough.
If it’s too loose you will need to adjust the tensioner. Once you’re happy with the tension, you can then put the chain back on the saw and get back to work.
How do you tell what chain I need for my chainsaw?
To determine the type of chain you need for your chainsaw you’ll need to consider the chainsaw’s make and model, bar length, and Pitch, Gauge, and Drive Links. The make and model of your chainsaw can be found on parts list or sticker on the side of the chainsaw.
The bar length is measured from the very end of the bar to the very center of the crankshaft and should be clearly marked. Pitch, Gauge, and Drive Links all refer to different dimensions and types of chain.
The Pitch is measured in 1/8 inch increments and is the distance between three consecutive rivets divided by two. The Gauge is the thickness of the drive links at the point where the chain fits on the bar.
Lastly, the Drive Links is a count of the number of drive links in the chain. You will need to look up your chain model number in the parts manual to determine the correct chain for your chainsaw.
What size chain is on my chainsaw?
The size of the chain on your chainsaw will depend on the type and size of the saw. For example, the Husqvarna 135 chainsaw has a 3/8 inch chain and the Husqvarna 455 has a. 325 inch chain. To determine the size of chain on your chainsaw, you will need to check the owner’s manual for the model.
Alternatively, you can also look on the packaging that came with your saw, or you may be able to find the size of your chain stamped on the drive sprocket, clutch cover, or edge of the guide bar.
How do I know what number my chain is?
The best way to know what number your chain is is by looking at the number markings on the chain itself. Most bicycle chains have a “pitch” number marked on them, usually followed by a dash and then another number.
The number before the dash is typically 8 or 9, and the number after the dash indicates the chain’s width–common sizes are 8, 9, 10, and 11.
If you can’t find any number markings on your chain, you can also use a chain-sizing tool to measure it. By using a chain-sizing tool, you can easily determine the width of the chain without having to mark it with a pen.
Once you know the width of your chain, most bicycle shops will be able to tell you what number your chain is, since the two numbers are typically linked together.
Will any chain fit a Stihl chainsaw?
No, not all chains will fit a Stihl chainsaw. Stihl chainsaws require specific chains that are designed for their saws. These chains are designed to work with the special features and components of Stihl saws.
Chains from other saw manufacturers may not fit properly, or may not provide the same performance as a Stihl chain. Additionally, chains that are designed for Stihl saws may not fit saws from other manufacturers.
It’s important to consult your owner’s manual and/or your local Stihl dealer to ensure that you’re purchasing the correct chain for your saw.
What size file do you use on a 3/8 chain?
You would use a 3/8 chain file size of 5/32″. Chain files are designed to remove excess metal in order to sharpen drive links or chain cutters along with any side plates. The size of the file corresponds to the chain’s pitch.
The chain’s pitch is determined by multiplying the number of rivets or cutters by 1/4″. As an example, a 3/8″ pitch chain would be composed of nine rivets and requires a 5/32″ file.
What do the numbers on a Stihl chain mean?
The numbers on a Stihl chain refer to the size and composition of the chain. Specifically, the numbers refer to the pitch, gauge, and drive link count of the chain.
The pitch of a chain refers to the size of its drive links, which are the parts of the chain that fit into the chainsaw bar. Pitch is typically expressed as either 1/4”, 3/8”,. 325”, 3/8” Low Profile (LP), or.404”.
The most popular variety is 3/8”, while 3/8” LP chains are becoming increasingly common.
The gauge measures the thickness of the drive links. Lower numbers indicate thicker drive links, while higher numbers indicate thinner drive links. If a chain has a 3/8” pitch, the gauge could range from.043” to.
058”, with. 050” being the most common size for that pitch.
Finally, the drive link count is simply the number of drive links in one chain loop. Stihl chains can have as few as 39 links, or as many as 78. The drive link count will have an impact on the length of the bar used in your chainsaw, as well as the maximum engine speed of your chainsaw.
Understanding the numbers on a Stihl chain can help you identify the correct chain for your chainsaw and ensure you’re getting the best performance possible.
What size chain goes on Stihl ms170?
The Stihl MS170 model chainsaw uses a 3/8″ pitch,. 050″ gauge, 55 drive link chain. The chain part number for the MS170 is Stihl 33RS55. This chain is pre-stretched and comes with an 18 inch bar. This chain is designed and manufacturer specifically for Stihl chainsaws with a 33cc engine.
It is important to note that the MS170 is not compatible with any other chainsaw model and should not be used with any other type of chainsaw.
What chain do professional loggers use?
Professional loggers typically use either a pulling chain or a rigging chain to move or secure logs. Pulling chains are typically attached to logging tractors, bulldozers, or skidders in order to pull logs across the forest floor.
Rigging chains are typically used to secure logs in order to move them to their loading area more safely. They are also sometimes used to bind two logs together so they can be transported as a single unit.
Chains used in logging operations are most often composed of either high-tensile steel or special alloys for high-strength performance. In order to ensure their strength and integrity, these chains are usually heat-treated or plated for extra protection from wear or corrosion.
In addition, logging chains are usually put through easy-to-understand numbering systems so loggers can easily identify them.
What is an advanced cut chainsaw chain?
An advanced cut chainsaw chain is a type of cutting chain designed for more advanced cutting tasks. It is typically more durable and longer lasting than standard saw chain and is designed for professional users who demand the highest performance from their chain saws.
Advanced cut chainsaw chain is thicker, stronger, and sharper, making it ideal for cutting through harder materials such as hardwoods and tough dense materials. It also features a more aggressive cutting angle, making it suitable for cutting thicker logs and larger pieces of wood.
This chain is often used for pruning and harvesting, as well as in rugged terrain or densely packed brush or trees.
Does skip tooth chain cut faster?
Yes, skip tooth chain cut faster than regular chain because the smaller, sharp teeth of the skip tooth chain help make a smoother, cleaner cut. This is because the smaller teeth can more easily penetrate and cut through wood, giving a much smoother finish than a regular chain with larger, less effective teeth.
The small teeth cut quickly and cause less drag, allowing you to work faster with less effort. Additionally, the skip tooth chain produces less dust, keeping the air and your work environment much cleaner than a regular chain.
In conclusion, skip tooth chain is not only faster, but also more efficient and cleaner.
How can I make my chainsaw chain cut faster?
Maintaining a chainsaw chain and ensuring it is sharp is one of the best ways to make your chainsaw chain cut faster. The teeth on the chain must be sharp in order for it to effectively cut through the wood.
Be sure to sharpen the teeth regularly to keep them at their best. You can use a chainsaw file or a chainsaw sharpener to achieve this. Additionally, it is important to clean the chain and oil it regularly.
This will help keep it functioning properly and reduce friction, making it run more smoothly and efficiently. If you have a carburetor chainsaw, make sure to keep it tuned up at all times. Dirt and debris will reduce your chainsaw’s performance and can cause it to run poorly.
You can also look into upgrading your chainsaw or investing in a new one with additional features that make it cut faster. For example, some chainsaws come with an acceleration trigger that helps it cut faster and feature better engine power.
Lastly, ensure you are using the right chain speed for the job you are doing. If the chain speed is too low, it won’t cut fast enough. On the other hand, if the chain speed is too high, the chain will become too hot quickly and dull much faster.
Do low kickback chains cut slower?
No, low kickback chains actually cut faster than regular chains. This is due to the specific design of a low kickback chain which includes a lowered kickback guard. This guard has two functions; first, it can create a buffer for kickback so that material being cut doesn’t kick back and harm the user or the chainsaw itself.
Second, because the guard has been lowered, the chain is able to cut through material more easily, resulting in faster cutting. Low kickback chains also have shallower gullets which can hold material for longer, resulting in more efficient cutting.
As you can see, low kickback chains are designed to provide both safety and speed.
