The Nerf Modulus Longstrike was released by Hasbro in 2019. The Longstrike is a blaster that comes with a barrel extension, detachable scope and bipod for added accuracy and dexterity. It boasts an impressive range of 100 feet and an 18-dart clip to fire multiple Nerf darts at once.
An extra clip and accessories are included, such as a twelve dart clip, a stock and a storage shoulder strap to transport with ease. The Longstrike is a great choice for anyone wanting to experience the ultimate Nerf battle.
Why was the Nerf Longshot discontinued?
Nerf’s Longshot CS-6 Blaster was initially released in 2006 and was one of the first long-range blasters to enter the Nerf market, offering full-auto or semi-auto blasting with a range of up to 35 feet.
It quickly became a fan-favorite and is still highly sought after today, over 10 years later.
Unfortunately, Nerf discontinued this classic blaster in 2011 after it had been on the market for five years. The exact cause of the discontinuation remain largely unknown, with speculations that it was due to a high rate of malfunctioning blasts and a decrease in sales over time as newer and more advanced models were released.
Some fans of the Longshot CS-6 speculate that the cost of production for the Longshot may have simply become too high and that Nerf was not able to justify continuing production when it was able to offer more advanced models at a lower cost.
This ultimately led to the Longshot being discontinued, leaving many long-term fans of the model disappointed.
Given its popularity and demand among enthusiasts, there is speculation regarding whether or not Nerf will ever decide to re-release the Longshot. For now, it remains out of production and is one of the most sought-after blasters in the Nerf community.
What are the rarest Nerf guns?
When it comes to the rarest Nerf guns, there are a few that stand out from the rest. The Nerf Longshot CS-6 (2006), known as the ‘Holy Grail’ of Nerf guns is the rarest and most sought-after NERF gun ever created.
It was originally released in 2006 as part of the N-Strike series and was only produced for a very short period of time. It was the first NERF gun to ever have a removable clip and it featured a modern, sleek design.
The Nerf Longshot CS-6 can be a bit pricey, with some listings selling for over $500.
The next rarest Nerf gun is the Nerf N-Strike Nite Finder EX-3 (2006). This gun was released in 2006 but was only available in limited quantities. It featured a unique red laser sight, making it a popular item among NERF fans.
The Nite Finder EX-3 has become extremely rare in recent years and can fetch price tags of up to $400.
The Nerf Vortex Proton (2011) is also considered one of the rarest NERF guns. Released in 2011, this gun features a rotating barrel and a spring-loaded hopper. It has a short range, but is known for its accuracy and power.
It can be difficult to find a NERF Vortex Proton in good condition, and they often sell for around $300 or more.
Finally, the Nerf N-Strike Elite Rayven CS-18 (2013) is considered to be one of the rarest NERF guns. This gun is unique in that it combines the features of both a clip-fed and flywheel-powered blaster.
It was only produced in limited quantities and can now sell for as much as $300.
Overall, it is clear that the rarest NERF guns are the ones that have only been released in limited quantities or that have become difficult to find. The Nerf Longshot CS-6, N-Strike Nite Finder EX-3, Vortex Proton, and N-Strike Elite Rayven CS-18 are all considered to be some of the rarest NERF guns and are highly sought after by collectors.
What Nerf sniper shoots the farthest?
The Nerf N-Strike Elite Digital Targeting Scope Red EF 22 Sniper is widely regarded as the Nerf sniper that shoots the farthest. This rifle features an impressive 70 foot range, and its motorized blaster fires 4 darts in a row with pump-action priming.
Additionally, it includes a shining red, light up scope that can help you line up precision shots. Of course, you can always modify any Nerf blaster to increase its range, but this one is already substantially longer than most.
Does the Nerf hyper hurt?
No, the Nerf Hyper does not hurt. This blaster features a foam dart, which provides a soft and safe darting environment that is generally accepted as non-painful. The Nerf Hyper also features an adjustable stock, making the blaster comfortable for all sizes and ages of blaster users.
Additionally, the blaster utilizes Nerf’s “Blastercore” ammunition system, which is designed to increase accuracy and reduce impact to surfaces and individuals when fired. All of these features make the Nerf Hyper an enjoyable and pain free blaster, thus making it a great choice for both indoor and outdoor foam darting.
What is the most modded nerf gun?
The most modded Nerf gun is the Nerf Longshot CS-6. This popular Nerf gun, released in 2006, it is one of the oldest blasters in the Nerf N-Strike series, and is often referred to as the “Cadillac” of Nerf guns.
Because of its sturdy construction and classic design, it is an ideal platform for modding.
The Longshot CS-6 has become one of the most popular Nerf guns among modders. It can be modded in a variety of ways, from attaching a scope to increasing its range and rate of fire. It can also be customized with a range of new attachments such as expandable stocks, bipods and even high-powered motors.
Its popularity among modders is due to its relatively simple design and the ability to quickly and easily customize it.
The Nerf Longshot CS-6 is one of the most iconic and recognizable Nerf guns, making it an ideal candidate for modding. It is beloved by Nerf fans for its classic looks and durability, and by modders for its simple design that allows for easy customization.
Which Nerf gun has the longest range?
The Nerf Ultra One Motorized Blaster has the longest range of all Nerf guns, boasting a range of up to 120 feet. This motorized blaster features a 10-dart clip with 10 official Nerf Ultra darts. The darts are designed for maximum distance, with flight tips and aerofin technology providing accuracy and reliability.
The blaster also features a rotating barrel, so you can easily switch between shooting single darts and a rapid-fire barrage of darts. The blaster also features an acceleration button, allowing you to power up the motor and increase your range.
The blaster comes with 30 Ultra darts, opposed to the 10 that comes in its clip, so you’ll never run out. With a range of up to 120 feet, this is the perfect choice for backyard battles and Nerf wars.
How far does the Nerf fortnite sniper shoot?
The Nerf Fortnite Sp-L Elite Dart Blaster has an advertised shooting distance of up to 90 feet (27 meters). This is quite a far distance for this high-powered Nerf blaster. It is also suitable for outdoor play, as it uses Nerf Elite darts, which are designed to be aerodynamic and fly further than some other types of Nerf darts.
The Sp-L Elite Dart Blaster comes with 6-darts, and the blaster can be manually cocked, so users can prepare for their next shot more quickly. It also features an internal clip system that can hold up to 3 darts and allow users to fire without having to reload each time they want to fire.
With regards to accuracy, this Nerf blaster is deemed to be highly accurate, so users can confidently hit their targets up to 90 feet (27 meters) away.
What is the Nerf mega sniper called?
The Nerf N-Strike Elite Centurion Blaster is the official name for the Nerf mega sniper. It is a famed blaster in the Nerf N-Strike Elite series, and is an impressive weapon in any Nerf arsenal. It features a long body and an impressive range of up to 100 feet.
It comes with an integrated, removable bi-pod and sight to help extend your range and accuracy during battle. It features an internal clip of 6 Mega Whistler darts and is capable of semi-automatic firing.
The blaster also features Tactical Rail System and Stop-Action Slide allowing for quick blasting and reloading. The Centurion also comes with a Mega Dart Clip system, allowing for quick and easy reloads during combat.
For Nerf yetis looking for a long-range weapon with a good clip size and impressive range, this blaster is the perfect choice.
What is the FPS of the Centurion?
The Centurion is a British tank, also known as the FV4201. It served with distinction in the British Army from the 1950s through the 1990s, and is now considered a classic of the Cold War era. It was the primary British main battle tank during the 1960s and 1970s.
In regards to its speed and mobility, the Centurion could reach a maximum speed of 25-30 mph (40-48 km/h) and had an operational range of 92.5 miles (149 km) with its 600 horsepower Rolls Royce Meteor engine.
As far as its firing rate, the main gun of the Centurion, the 20 pounder (84 mm) had a rate of fire of 8 rounds/minute, giving it an approximate firing rate of 8 rounds/second, or an 8 FPS rate of fire.
Does Nerf still make the Centurion?
Yes, Nerf still produces the Centurion blaster. First launched in 2013, the Centurion was the longest Nerf blaster ever produced, measuring a whopping 39 inches when fully assembled. This large blaster was powered by a clip system and used bluetooth for the jam-proof dart launch.
It came with 6 Elite Darts and Electronic Targeting Scope, and could fire darts up to 100 feet. The Centurion is still widely available from many online retailers and toy stores.
What is the smallest nerf gun in the world?
The Nerf Micro Shots models offer some of the smallest Nerf guns in the world. These are mini versions of some of Nerf’s classic blasters, such as the Micro Shots Dartslinger, Micro Shots Sharpshooter, and Micro Shots Splatterblast.
All three of these models measure around 5 inches in size and come with two darts that can be fired up to 10 feet away. Additionally, the darts are safe and foam-based, making them perfect for kids of all ages.
Finally, these models are easy to load, look great, and are affordable for the average Nerf enthusiast.
How do you disassemble a Nerf Longshot CS-6?
Disassembling a Nerf Longshot CS-6 is a fairly straightforward process. Below are instructions on how to do so safely and efficiently.
1. Remove the barrel by pushing the barrel retainer down and then pulling the barrel off.
2. On each side of the blaster, unscrew the screws that hold the shell halves together.
3. Carefully pull the shell apart and set aside.
4. Inside the shell halves, you will see the internals of the blaster.
5. Undo the Airlock mechanism by unscrewing the screws that hold the airlock in place.
6. Remove the airlock, plunger head and spring.
7. On each side of the blaster, unscrew the screws that hold the trigger unit in place.
8. Carefully pull the trigger unit out.
9. In the shell of the ability to see the barrel catch, barrel catch spring and barrel catch pin.
10. Remove the barrel catch, barrel catch spring and barrel catch pin by prying them out of the blaster.
11. Remove the two screws located on the side of the blaster near the magazine.
12. Carefully separate the two halves that make up the magwell, and set aside.
13. Inside the magwell, you will see the priming bar and the priming bar spring.
14. Unscrew the priming bar and remove it along with the priming bar spring.
15. At the front of the blaster, unscrew the two screws that hold the barrel spring in place.
16. Carefully remove the barrel spring and set aside.
17. Now that all the internal parts have been removed, gently remove the barrel retainer.
18. You have successfully disassembled the Nerf Longshot CS-6!
How do you mod Nerf N Strike?
Modifying your Nerf N Strike blaster can be both fun and rewarding! You can customize it with aftermarket or 3D printed parts to make it look and perform better. There are a few popular ways to modify your Nerf N Strike blaster:
1. Increase Range – One of the most popular modifications to the Nerf N Strike blaster is to increase range. This can be done by changing out the stock barrel, adding a tighter seal or spring, and making other small modifications to the internals of the blaster.
Building an air restrictor-like device can also help to increase the range.
2. Increase Rate of Fire – You can also modify your Nerf N Strike blaster to increase its rate of fire. This is done by making various modifications, such as removing the air restrictor, adding a higher speed motor, and adjusting the spring to reduce friction.
3. Add Aesthetic Parts – You can also modify your Nerf N Strike blaster to make it look more aesthetically pleasing. This can include adding aftermarket parts such as stocks, scopes, and rail systems.
Additionally, some popular 3D printed parts are available to give your blaster a unique look.
In conclusion, modifying your Nerf N Strike blaster can be a fun and rewarding experience. With the right modifications, you can tailor the blaster to your specific needs and make it look and feel more personalized to you.
How do you remove the bolt from a Nerf Longstrike?
The Nerf LongStrike is a popular Nerf gun that features a removable bolt. Fortunately, removing the bolt is a relatively straightforward process.
Begin by cocking the gun fully back before inserting the barrel and cylinder assembly into the receiver. Now, you will need to locate the pin located on the right side of the receiver. This pin is connected to the bolt and is used to hold it in place.
Using a flathead screwdriver, press down firmly on the pin in order to push it out of the receiver. The bolt should now come loose, allowing you to remove it.
Be sure to keep track of the small parts, such as the bolt, pin, and spacer, in case you need to put them back into the gun later. Once all of the parts have been removed, you can easily re-assemble the gun by reversing these steps.
How do you remove a longshot priming handle?
Removing a longshot priming handle requires a few simple steps. First, you’ll want to make sure that the blaster is unloaded and safety measures are taken. Once this is done, you can begin removing the handle.
The first step is to pull out the pin located near the handle clip on the upper side of the blaster. This pin is used to hold the handle in place, so you’ll need to remove it first. Once the pin is removed, the handle should come off easily.
If it doesn’t, then you may need to use some pliers to help you get it loose. After the handle is off, you can then move to the other side of the blaster to remove the handle springs. To do this, simply wedge something thin between the barrel and the priming handle clip to hold the priming handle in place.
This should make it easier to find the two springs underneath the handle. Once the springs are removed, the handle should come off easily. The last step is to put the springs back on in reverse order so the handle can be reinstalled easily when needed.
What is the thing you pull back on a Nerf gun called?
The thing you pull back on a Nerf gun is known as the priming handle or pump handle. It is located on the top, front or side of most Nerf blasters. When you pull back the priming handle, it cocks the blaster back to ready it for firing.
Once it is fully pulled back, the blaster is then ready to fire a Nerf dart or other projectile. For some blasters, the priming handle must be pulled back and released between each shot in order to properly cock the blaster.
How do hammer action nerf guns work?
Hammer action Nerf guns work by using a spring-loaded plunger assembly to fire foam darts. The plunger is connected to a hammer, and when the trigger is pulled, the hammer pounds onto the plunger. This causes air to be expelled from the barrel and propel the darts out.
The firing chamber is sealed off, allowing the compressed air to build up and launch the Nerf darts with greater force. The plunger, hammer, and firing chamber are all powered by spring-loaded mechanisms to deliver greater power and accuracy.
This type of nerf gun is an ideal choice for those wanting greater range and accuracy from their blaster.