Skip to Content

When should I start Scotts lawn care?

The best timing for starting Scotts lawn care will depend largely on what type of lawn you have and what type of local climate you live in. If you live in a temperate climate with a cool-season grass such as Kentucky Bluegrass, then the best time to start using Scotts lawn care products is in the early spring, prior to the first growth period.

This will allow the grass to develop a full root system and become more resistant to summer heat and drought. If you live in a hot and humid climate, then the best time to use Scotts lawn care products is during the warmest months of the year.

This will help your grass to stay healthy and green even during periods of extreme heat. No matter what climate you live in, using Scotts lawn care products consistently throughout the entire growing season will help to maintain a healthy and beautiful lawn.

How long does it take to see results from Scotts Bonus S?

It can take six to eight weeks after application to see results like a thicker, greener lawn from Scotts Bonus S. Depending on the lawn’s condition, you may start to see results such as germination, color, texture, and root growth in as little as two weeks.

For best results, you should mow your lawn regularly, water it deeply, and make sure it is getting plenty of sunlight. Additionally, you will likely need to re-apply Scotts Bonus S every five to nine weeks in order to maintain the improvements in the appearance of your lawn.

How long does it take for Scotts Step 1 to work?

Scotts Step 1 Weed Control for Lawns fertilizers and weed control products begin working immediately and should give visible results within hours. Depending on your particular lawn and weeds you are targeting, it may take up to 4-6 weeks for full coverage and results.

Scotts Step 1 Weed Control for Lawns works to kill and prevent many weeds like dandelions, crabgrass and clover. For best results, make sure to apply the product when temperatures are between 65 and 80 degrees F.

Water for at least 10 minutes after applying so that the product penetrates the crabgrass, dandelions, and weeds and has the best chance to effectively work.

What month do you apply Scotts Turf Builder?

You can apply Scotts Turf Builder any time of year, depending on your lawn and climate. Generally, the best time to apply is in the spring or fall months. Spring is an optimal time to apply Scotts Turf Builder since it helps to thicken your turf, as well as prepare for the warm season ahead.

Then, in the fall months, it’s a great way to kick start the recovering process of your turf for the cold season. For example, in cold climates, it’s recommended to apply Scotts Turf Builder in the late summer or early fall months to help feed and fertilize your turf after a long summer of wear and tear.

In warm climates, you may apply throughout the year. Scotts Turf Builder can even be applied in the winter months, as long as there’s no snow on the ground and your turf isn’t dormant. Generally, it’s not recommended to apply more than three times per year.

Should I mow before or after fertilizer?

The answer to this question largely depends on the type of fertilizer you are using, as some have instructions that recommend fertilizer be applied before mowing, while others recommend that you mow first.

If you are using a slow-release fertilizer, it is often recommended to spread it over the lawn before you begin mowing. This allows the fertilizer to be more evenly spread throughout the lawn and kept from being thrown away by the mower.

On the other hand, if you are using a fast-release fertilizer, it is best to mow the lawn before application. This helps to create an even bed for the fertilizer, allowing it to be absorbed quickly by the lawn soil as well as preventing clumping or scorching caused by the heat of the mower.

Therefore, it is important to read the instructions of the fertilizer you are using in order to determine whether it should be applied before or after mowing.

Does Scotts Step 1 need to be watered in?

Yes, Scotts Step 1 should be watered in after it has been applied. It’s important to water it in to ensure that the fertilizer and weed control chemicals have been absorbed into the soil. If you don’t water it in, it can wash away or be taken away by rain, preventing it from having an effect on the lawn.

For best results, water the lawn lightly with a garden hose or an irrigation system after it has been applied. Depending on the size of the lawn and the amount of fertilizer applied, it may take up to 30 minutes or longer to water the lawn in.

How long after applying Scotts Step 1 can I seed?

After applying Scotts Step 1, you should be able to seed approximately seven days later, depending on the weather and the type of seed used. Additionally, the amount of water you apply to the area should be kept to a minimum so that the grass seed does not get washed away.

To protect the seed from birds and other animals, you should apply Scotts Step 2 by covering the area with Scotts EZ Seed Patch & Repair. This product helps promote seed germination and generally takes about one week to work.

After the grass seed has been adequately covered with the Patch & Repair, you should make sure to keep the area moist to promote better germination.

Can I apply Scotts Step 1 before it rains?

Yes, you can certainly apply Scotts Step 1 before it rains. Since Scotts Step 1 is designed to help prevent weeds from germinating and controlling existing weeds, it is best to apply Step 1 before the weeds start growing.

Applying it prior to the rain gives it the opportunity to soak into the soil and create the optimal conditions for weed control. Additionally, applying Scotts Step 1 before it rains can also help reduce wash-off of the product, which can occur with heavy precipitation.

Thus, applying Scotts Step 1 before it rains can provide the best chance for effective weed control on your lawn.

Can I mow and fertilize on the same day?

Yes, you can mow and fertilize on the same day, but you need to consider a few things. First, make sure your lawn is dry before mowing. Fertilizer may stick to wet grass, leading to uneven distribution and possible burning of your lawn.

Second, mow the lawn before applying fertilizer. This will help you spread the fertilizer more evenly. Also, be sure to choose fertilizer and mowing blades that are appropriate for your type of grass.

Lastly, once you have mowed and applied the fertilizer, make sure to water it in well. This will help the fertilizer penetrate the soil and be most effective. In conclusion, you can mow and fertilize on the same day, just be sure to follow the guidelines and take the appropriate precautions.

Can you use too much Scotts lawn food?

Yes, you can use too much Scotts lawn food. Applying more than the recommended amount of fertilizer can burn your lawn and cause excess build up of chemicals in the soil. Over fertilizing can also cause excessive growth of weeds, increase turf disease pressure, create imbalances in your soil, and cause nutrient pollution in waterways and streams.

For these reasons, it’s important to follow the instructions on Scotts lawn food products and apply the suggested amount. Depending on your lawn’s needs and current health, you may want to consider organic products or contact a certified lawn specialist for help.

Will fertilizer burn grass if not watered?

No, fertilizer will not burn grass if it isn’t watered. Fertilizer is a beneficial source of nutrients that help to promote grass growth and health. However, if fertilizer is applied and not properly watered in, the fertilizer may not be absorbed by the grass’s root system.

Without water, fertilizer may rest on the surface of the grass and be blown away or dried out. If fertilizer is left on the grass’s surface, it is possible for the fertilizer to burn spots in the grass due to overexposure to direct sunlight.

Therefore, once fertilizer is applied, it should be watered in to help distribute it and make it available to the grass’s root system.

What month Should I fertilize lawn?

The best time to fertilize your lawn is generally in April and again in September. This gives the grass an early jump-start in the spring and protects it over the winter months. Depending on the type of grass and the climate in which you live, you may also want to add an additional fertilizer application in the summer months.

In addition to regular fertilizer applications, it is also important to aerate and dethatch your lawn in the fall. Aerating loosens compacted soils and provides new pathways for oxygen and nutrients to penetrate the soil.

Detaching removes any dead or matted turf that may be choking out the healthy grass.

Should you fertilize before or after rain?

Rain can provide some natural nutrients for your plants and lawn, but often the amount of rain is not enough to ensure the health of your lawn and garden. Generally, it is best to fertilize your lawn and garden prior to rain so that the nutrients are quickly absorbed into the soil.

This will help to ensure that your plants have all of the necessary nutrients they need to grow strong and healthy. It is also important to determine the type of fertilizer you are using and to be aware of any special instructions included on the packaging so that you can apply it appropriately and in the correct amounts.

When fertilizing your lawn and garden before the rain, it is important to water the area thoroughly afterwards. This will help to move the fertilizer further into the soil so that it is used by the plants effectively.

It is also important to time your fertilizing so that it does not get washed away with any heavy downpours, so it is best to avoid applying it just before a heavy rainstorm. Finally, it is important to consider that too much fertilizer can introduce pollutants into the environment, so it is important to apply the fertilizer and water your lawn and garden responsibly.

How many minutes should I water my lawn after fertilizing?

It is important to water your lawn after fertilizing to ensure the fertilizer is absorbed into the soil. The amount of time and water used to do so will depend on the type of fertilizer used and the soil composition.

Generally speaking, you should aim to water your lawn for at least 15-30 minutes after fertilizing. This will help to ensure the fertilizer has been evenly distributed and properly absorbed into the soil.

For areas of soil with a higher clay content, it may be necessary to water for up to an hour after fertilizing to ensure the fertilizer has been sufficiently absorbed. It is also important to note that if conditions are very hot and dry you may need to water your lawn more frequently and for longer periods of time than usual to ensure the soil stays hydrated.

Can you put Scotts fertilizer on wet grass?

No, it is not recommended to put Scotts fertilizer on wet grass. The reason for this is because the fertilizer is more likely to either wash off or stick to wet grass and not make its way deep into the soil, where it needs to be to be properly absorbed.

Additionally, fertilizer can cause burning of the grass if it does not get deep enough into the soil and if the grass or leaves are left wet for too long after application. It is always best to make sure your grass is dry before applying any type of fertilizer.

Is it OK to put fertilizer on dry grass?

No, it is not ok to put fertilizer on dry grass. Fertilizer should only be applied to moist soil, as fertilizer can add salt to the soil which can be damaging to the soil and grass, especially when the soil is dry.

Applying fertilizer to dry soil will cause it to stay put, instead of being absorbed into the soil, which can result in an uneven distribution of the fertilizer. Additionally, when fertilizer is applied to dry soil, it can irritate the existing grass and cause it to burn and damage the grass.

For this reason, it’s best to water the soil before applying any fertilizer. This will ensure that the fertilizer is absorbed evenly into the soil and will nourish the grass.

What happens if you apply fertilizer to wet grass?

Applying fertilizer to wet grass can lead to issues and should generally be avoided. Fertilizer is made with salts and other minerals, and when applied to wet grass, the fertilizer can stay on the blades and cause them to dry out and burn.

This can leave brown spots and damage the grass. In addition, the fertilizer can leach into the soil, causing unhealthy high-salt content when it washes off the blades. This high salt content can cause the grass to become stunted and turn yellow or even die.

The best way to apply fertilizer is to water the lawn first, then wait a day or two for it to dry before applying the fertilizer. This will help ensure the fertilizer is absorbed properly and not left on the blades.

It’s also important to follow the instructions on the bag when applying fertilizer, as applying too much can lead to the same issues mentioned above.

Can I fertilize my lawn in the rain?

The answer depends on what type of fertilizer you are using. If you are using a granular fertilizer, then it is generally not recommended to fertilize your lawn in the rain. This is because the granules are likely to be washed away and diluted by the rain, meaning it will be less effective in helping your lawn grow.

Additionally, granular fertilizer, when wet, can cause mild burning to your lawn, so it is best to avoid applying it in the rain.

On the other hand, if you are using a liquid fertilizer, then you are usually safe to fertilize your lawn in the rain, as it is designed to quickly penetrate the soil and will not be affected by the weather conditions.

Ultimately, the best course of action is to follow the instructions given on the specific fertilizer you are using, as this will give you the most accurate and reliable guidance.