Skip to Content

Where should you not put curtains?

You should not put curtains on fireplaces or any heat, naked flame, or other sources of ignition. You should not put curtains near stoves or ovens that may generate sparks or high temperatures. You should also not put curtains near any exhaust fans, as the air movement can cause them to billow and get damaged.

Similarly, fast-moving mechanical parts such as fans and blowers can cause curtains close by to get stuck in the parts and ruined.

How do you hang curtains on an inset window?

Hanging curtains on an inset window can be tricky, but there are some steps you can take to ensure that your curtains look great. First, measure the area of the window and decide the length, width, and number of panels you would like your curtains to be.

Consider the type of rod you will need so that your curtains can hang properly. If you are using a rod with adjustable brackets, make sure it is wide enough to reach the inset window. Next, install the rod following the instructions that came with the product.

Make sure the rod is installed securely and level. Hang your curtains onto the rod and make sure to adjust the length as necessary. Finally, make sure the curtains close completely and hang from top to bottom.

You may need to add additional weights or tie-backs to make sure your curtains close properly and look great.

What are the rules for hanging curtains?

When hanging curtains, the following rules should be taken into consideration:

1. Measurement: Before hanging your curtains, it is important to measure the window accurately. This includes the length, width, and height. If your curtains are going to be mounted on a rod above the window, you must add approximately 4-8 inches to the width to ensure they overlap the window completely.

2. Installation: When mounting the curtains, make sure to use appropriate mounting hardware and make sure it is secure. If using screws, be sure to pre-drill the holes for a smooth installation. Make sure the rods are securely mounted as well, as the weight of the curtains will cause it to sag if the hardware is of poor quality.

3. Curtains Type: Consider the type of curtains you have when installing. Heavier curtains require stronger brackets and reliable hardware, which should be used when mounting. Sheer curtains, on the other hand, do not require as much support.

4. Finishing Touches: When hanging your curtains, add the finishing touches such as curtain rods, finials and tie backs. These items can change the look of your window and provide a more polished look.

Following these rules is key to ensure a successful curtain installation. Making sure your curtains measure correctly, are securely mounted and look great is important to ensure that your windows look their best.

Are curtains outdated?

No, curtains are not outdated. In fact, they remain one of the most popular window treatments today and are often seen in modern homes. They bring a timeless and classic style to any space, and are a great way to bring warmth and privacy to any room.

Curtains come in an array of styles and fabrics, allowing you to customize the look of your space and make it truly your own. They have the ability to really bring a room to life and can be used to soften a room’s edges and create an inviting atmosphere.

Additionally, curtains have practical purposes, like controlling the amount of light in a room or blocking out sound or drafts in a home. So all in all, curtains are very much in style and are a great option for adding a touch of personality and functionality to any room.

Should curtains face inside or outside?

When it comes to deciding whether curtains should face inside or outside a window, there are a few practical considerations to take into account. Generally speaking, curtains should be hung so that they face the outside of the window.

There are a few reasons why this is the case.

First, curtains that face outside will add a layer of insulation to a window, which helps to keep your home warm and reduce energy costs. This is especially important if your windows are prone to developing condensation or drafts.

Additionally, curtains that face outside will help to keep out any unwanted light from the street or from nearby buildings. This increases privacy and reduces distractions to rooms that may need to be darkened for sleeping or watching movies.

You’ll also want to consider the style of the room and the type of window you have. If the windows are small, it may be best to hang the curtains on the inside of the frame to create the illusion of more space.

Additionally, if you’re using drapes or sheers to make a more formal or sophisticated statement, they may look better when they face inside the window.

Ultimately, the decision should be based on what works best aesthetically and practically for the room and its windows.

How long should curtains be to puddle?

Curtains should be long enough to puddle on the floor for a pleasing, luxe look. To get the desired length, measure from the curtain rod (where the curtain will hang) to the floor. Add an extra 2-4 inches to the length for a more dramatic puddling effect.

Most curtains need to be longer than any expected window size, so they can be adjusted upon installation according to the desired final length. When shopping for curtains with the intention of puddling, look for styles that are specifically labeled as “long length” curtains, which are typically around 108-120 inches long.

Be sure to take the fullness of the curtains, and what the fabric is gathered onto, into consideration in order to achieve the right look.

Can curtains be a few inches off the floor?

Yes, curtains can be a few inches off the floor. Depending on the specific style and design of the curtains, having them a few inches off the floor can be a desirable look. This gives the curtains a slight airy and dramatic feel.

However, if you have an especially long curtain that falls near the floor, it is generally advisable to have it slightly touching the floor, or have the hem of the curtain just above the floor. This keeps the fabric weighted and prevents it from bunching up or blowing around in the breeze.

If you have pets or young children, however, you may want to avoid having the curtains reaching all the way to the floor to avoid any trips or unfortunate incidents.

Should curtains cover the whole wall?

The answer to this really depends on a few factors, such as how large the window is, how tall the ceiling is, and what type of look you’re hoping to achieve with the curtains. For instance, if you have a particularly large window or a tall ceiling, you may want to hang the curtains higher up on the wall and cover the entire wall in order to create a more dramatic effect.

Alternatively, if you want the curtains to be a more subtle accent, then you may just want to cover the window frame and a portion of the wall above instead. Ultimately, it all comes down to personal preference and what kind of look you want to create.

Do you hang curtain rods on trim or wall?

When hanging curtain rods, it’s important to determine where you want the rod to be and what kind of material you’ll be hanging it on. If the wall is plain and you want to project the curtain rod out, then you can hang it directly on the wall.

But if you have a decorative trim, such as a crown or chair rail molding, then you should choose to hang the curtain rod on the trim instead of the wall. This will help create a visually pleasing look and draw attention to the trim.

When mounting the rod on the trim, you will want to make sure you have the right hardware available to attach it safely and securely. You’ll need to have the appropriate wall anchors or screws to position the brackets for the rods.

This will help ensure that the rod will be properly supported and will not loosen or become detached. You should also pay attention to the weight of the curtains and make sure that the rod can hold them and is not too light.

It’s important to keep in mind that different rooms will require different approaches and materials when it comes to hanging your curtain rods. So, it’s best to consult with a professional to ensure you’re taking the right steps and selecting the right materials to hang your curtains securely and safely.

Do curtain rods go above trim?

Whether curtain rods go above trim or not depends on the type of trim, the style of curtains, and the overall look you are trying to achieve. In some cases, you can hang your curtain rods directly above the trim without issue.

This may be the case if you have thin trim and your curtains have a relatively unobtrusive style, such as sheers or cafe curtains.

However, in many cases, it can be more visually appealing to mount curtain rods slightly above the trim. This gives your curtains slightly more space to hang and prevents them from obstructing the trim too much.

It can also make the installation look more deliberate and intentional.

For larger or bolder trim styles, you may want to mount your curtain rods at least a few inches above the trim to prevent the trim from competing with your curtains. In this case, mounting the curtain rods high enough so that they are still visible gives a more balanced look to the window treatments.

Ultimately, the best way to decide whether to mount your curtain rods above trim is to experiment with different heights and see which look is most appealing to you.

How do you close a gap between curtains and walls?

The most common way is to use a curtain rod. The rod should be wide enough to cover the gap and installed securely into the wall or window trim. If the gap is too large for a traditional curtain rod, you may need to use a specialized gap-closing rod that is made especially for larger gaps.

Another option is to use drapery pins or hooks to attach the curtains directly to the wall. You could also use a magnetic curtain rod that can attach to any metal surface near the window. Finally, if your curtains are completely able to cover the space, you can get tension rods or shower rods to secure them in place and minimize the gap.

How far should curtains be from crown molding?

When hanging curtains in relation to ceiling crown molding, the rule of thumb is that the curtains should be hung slightly higher than the molding. The molding should just barely peek out from underneath the top of the curtains.

That said, if high ceilings are present, the curtains can be hung several inches higher than the crown molding. It all depends on taste, but it is generally accepted that the curtains should be hung no lower than the crown molding.

If the crown molding is more ornate, it may look better for the curtains to reach to just below the molding. Regardless, when hanging curtains near crown molding, care should be taken to ensure the curtains are centered so the room appears balanced.

How do you dress a recessed window?

When dressing a recessed window, you will want to ensure that you choose window treatments that are appropriate for the window size, shape, and style of your room. When choosing window treatments, it is important to consider sizing, design, and fabric.

When measuring the window, you need to determine the width, length, and depth of the window and the opening. You will then need to measure the distance from the floor to where the window starts and the width of the window trim.

This information will help you decide on the right size window treatments to fit the window accurately.

Once you have your measurements, you can then decide on the type of window treatments that will suit the style of the window. Common options for covering recessed windows include shades, shutters, blinds, drapery panels, and curtains.

Roman shades are a great choice for covering recessed windows because they are available in multiple colors, fabrics, and designs. Shutters come in a variety of styles, colors, and materials and can be customized to fit your window.

Blinds also offer a tailored look and provide a variety of options for light filtration and design. Sheer drapery panels are also a stylish and light-filtering option for a recessed window.

Once you have selected the window treatments, you can then choose a fabric and mount the covering to the window. You can either choose to mount the covering directly to the window or fit it within an area called the recess, which is located directly within the window frame.

With the right measurements and some careful consideration, you can easily dress a recessed window and give your room a custom look.

When measuring a recessed window for curtains one should?

Measuring a recessed window for curtains is a critical step in making sure you get the right size of drapes that will fit within the frame of the window. The best way to measure the window is to take three different measurements.

The first is the width of the inside of the recessed window frame, which should be measured at the top, middle, and bottom of the frame. Then measure the height from the top of the window to the bottom of the recessed part of the window.

Lastly, measure from side to side across the window to ensure it is an even, square shape. Once you have all three measurements, you can use the smallest one for each dimension to ensure the curtains fit within the window frame.

Additionally, it is important to always double check your measurements to make sure the curtains will fit for a perfect fit.

Do you have to put curtains on all windows in a room?

No, you do not have to put curtains on all windows in a room. Curtains can be used to provide privacy, keep out light and bring in warm colors, but if privacy or controlling the amount of natural light entering the room is not a concern, then curtains may not be necessary.

In some cases, the view outside may be appealing, and forgo curtains, to show off the window to its best advantage. There are other window treatments, such as blinds, shades and shutters, that can be applied in lieu of curtains.

Ultimately, the decision of whether or not to put curtains on a window or use other forms of window treatments should be based on the individual needs and preferences of the homeowner.

Leave a comment

Your email address will not be published. Required fields are marked *