Poolvergnuegen is a brand of pool-cleaning robots and accessories owned by Hayward Industries. Hayward Industries is a US-based company and is the world’s leading manufacturer in residential and commercial water-related products such as swimming pool pumps, filters, heaters, cleaners, and more.
It was founded in 1925 and is headquartered in Elizabeth, New Jersey. In addition to Poolvergnuegen, Hayward Industries manufactures many other brands such as AquaVac, TriStar, Super Pump and Navigator.
Hayward partners with roughly 300 independent dealerships and distributors nationwide, as well as multiple online retailers, to bring their products and services to customers around the world.
How long does the pool cleaner last?
The lifespan of a pool cleaner will depend on the type of cleaner you have and how it is cared for. Some types, such as robotic pool cleaners, could last up to five years or longer with proper maintenance and cleaning.
Other types such as pressure-side cleaners may need replacing more frequently, typically within 2-3 years. The key to extending the life of any pool cleaner is regular maintenance and cleaning, as well as being sure to use the correct size and type of cleaner for your pool.
Additionally, following the manufacturer’s instructions on how to use and care for the unit will help keep it running smoothly for a longer period of time.
How do you fix a pool cleaner?
Fixing a pool cleaner typically hinges upon understanding the type of cleaner and the problem you’re trying to solve. With that in mind, here are a few different steps to take for different types of pool cleaners—including suction-side, pressure-side and automatic cleaners.
For suction-side cleaners, you’ll want to make sure the filter is clear, the cleaner’s flow rate is adequate, the hose is properly connected, and the gears and other internal parts are properly lubricated.
Additionally, check the skimmer basket and drain covers to make sure they’re not too clogged up. To ensure proper flow and pressure, adjust the priming valves, backwashing valves and the regulator valve.
Pressure-side cleaners require similar checks and maintenance—most notably checking the filter, skimmer basket and drain covers, lubricating the gears and checking that all valves are properly adjusted.
Additionally, ensure that the booster pump is functioning properly, the filter bags are clean and the pressure gauge is reading correctly.
For automatic cleaners, make sure the tyres are properly inflated and that the filter is clean. Additionally, check the filter hoses for any kinks, and check the speed options if the cleaner has them, ensuring the correct speed setting is selected.
Once you’ve confirmed the primary culprit, you can replace the specific part if necessary. If you aren’t able to figure out the exact problem, raise a help request with the manufacturer or a pool technician to help you diagnose and resolve the issue.
Why is my Hayward pool cleaner not moving?
First, check to make sure the power cord is properly plugged in. If it is, make sure the cord is in good condition as it could be broken or frayed. If the cord is good then check to make sure the filter is not blocked and that the impeller is free from obstruction.
If the filter is clear and the impeller free from obstruction, then there may be a problem with the pump or motor. Inspect the pump and motor for any signs of wear or damage. If necessary, compress the drive belt to ensure it is tight and is not slipping.
Lastly, check to make sure the regulator valve is set properly. If you are still having issues with the pool cleaner not moving then you may need to contact a qualified pool service professional to look at it.
Why does my pool vacuum stay in one place?
A pool vacuum may stay in one place if it is stuck on something. This can happen if the suction power of the vacuum is too strong and it is caught on a piece of debris or the edge of the pool. It must be strong enough to pick up debris but not so strong that it gets stuck.
Additionally, if the hose is bent in a certain way or knotted, the vaccum may be restricted from moving. Finally, if the vacuum is connected to its pole it may stay in one place unless the user manually moves it.
Why is my Hayward Navigator moving slowly?
One of the most common reasons is that it is clogged with debris, such as leaves and twigs, which can clog the skimmer and filters. Additionally, it could be due to clogged impellers, which are responsible for sucking water in and propelling it out of the cleaner.
If the impeller is blocked, the cleaner is not able to move around as efficiently as it should. It could also be caused by low water pressure, which can be addressed by checking the water regulator or pressure valve on the pump.
Additionally, if the water lines are too small or if there is a kink in the hose, this can also restrict the flow of water and prevent the cleaner from moving as quickly as it should. Lastly, if the cleaner’s parts are worn or damaged, it may not be able to move as quickly as it normally does.
If the cleaner does require repairs, it’s important to make sure to use only genuine Hayward parts to ensure optimal performance.
How do I get my pool vacuum to work?
To get your pool vacuum to work, you will need to assemble the parts, connect all necessary hoses, and ensure your pool pump is running.
First, assemble the different parts that make up the vacuum. This usually includes a telescoping pole for handle, vacuum head and hose. Assemble these parts according to the manufacturer’s instructions.
Once assembled, attach the hose to the vacuum head, ensuring it is connected securely.
Next, connect the hose from the vacuum to the suction port on the side of your pool. If you have a pressure-side cleaner, connect the larger, pressure hose to the pump port on the pool side of your cleaner.
Be sure to secure the hose clamps.
Now, turn on the pool pump and check the vacuum quickly. If everything is in working order, the vacuum should start pulling dirt and debris from the bottom of the pool. Make sure the hose is not kinked and the vacuum is pulling debris before leaving it unattended.
If you need to make adjustments to the pool cleaner’s operation, consult the owner’s manual. Many cleaners have adjustable settings that can be tweaked according to the size and surface of your pool.
Remember, always turn off the pool pump before making adjustments. Hope this helps you get your pool vacuum running smoothly!
Why is there no suction on my pool vacuum?
It is important to troubleshoot each potential cause in order to determine the underlying issue.
First, check the skimmer basket. If it is clogged with debris, it may be preventing the vacuum head from creating a proper suction.
Next, check the pump filter. If it is clogged, jammed, or damaged, this may also be causing a lack of suction. If the filter is dirty, clean it according to the manufacturer’s instructions.
Third, check the connections from the vacuum head to the hose. Make sure that all connections are tightly secured. If any of the connections are loose, the suction will be impaired.
Fourth, check for a clog in the hose or the vacuum head. If the hose or vacuum head is clogged, it will interfere with the suction.
Finally, if all of the above steps have been checked and no issue has been identified, it may be necessary to have your pool vacuum repaired or replaced.
If you are concerned about the lack of suction on your pool vacuum, it is best to consult a professional to ensure that the underlying issue is properly identified and resolved.
Why won’t my pool cleaner climb the walls?
If your pool cleaner is not climbing the walls of your pool, there are a few potential causes. First, you should check that the suction and pressure are properly balanced. If the pressure is too low, the cleaner won’t be able to get sufficient suction to climb the walls of your pool.
You should also check the filters on the pool cleaner to ensure they are not clogged. Clogged filters can prevent the cleaner from being able to develop enough suction to climb the walls. If neither of these are the issue, there may be a mechanical malfunction; you will likely need to take the cleaner to a repair shop for diagnosis and repair.
How do you use an automatic pool vacuum?
Using an automatic pool vacuum is a simple way to keep your pool clean. The most important thing to do before using an automatic pool vacuum is to make sure that the skimmer and pump baskets are clean and free from debris.
Once these preparations have been made, you will need to assemble the necessary equipment for the automatic pool vacuum. This includes the vacuum head, hose, and pool pole.
Next, submerge the vacuum head into the water and secure the hose and pool pole to the head. Make sure that the hose is securely attached and that the pool pole is firmly in place. Once the equipment is in place, locate the vacuum’s power source and turn it on.
The vacuum should now be ready to start its cleaning cycle.
Depending on the size of the pool, the cleaning cycle can take anywhere between 20 minutes to two hours. Make sure to keep an eye on the vacuum while it is in use and clean any debris that accumulates.
Once the cycle is complete, shut off the power source and carefully remove the vacuum head from the water. Place the hose and pool pole safely aside, and use a pool brush to give the bottom of the pool a final scrub.
Finally, clear out the skimmer and pump baskets before storing the vacuum for future use.
Should pool pump be full of water when vacuuming?
No, the pool pump should not be full of water when vacuuming. When vacuuming the pool, the pool vacuum should be attached to the skimmer or to a dedicated vacuum line. The pump does not need to be filled with water, as long as it is primed and working correctly, it will draw in water to be filtered and circulated when running.
If the pump is full of water, it can restrict the suction and make vacuuming the pool more difficult. Additionally, too much water in the pump can cause it to become over pressurized, leading to an inability to properly prime itself.
To vacuum your pool, check to make sure the pump is primed and working correctly, and then connect the vacuum to the skimmer or dedicated vacuum line. Turn on the pump and begin vacuuming the pool.
What setting do you put your pool filter on when vacuuming?
When vacuuming your pool, it is best to set your pool filter to the “Waste” or “Recirculate” setting so that all the dirt and debris collected is routed directly to the pool’s main drain instead of recirculating back into the pool.
If you are using a robotic pool cleaner, your filter will only need to be set to the “Filter” setting as the robotic cleaner will collect the debris and dispose of it directly. Just make sure to thoroughly clean your robotic pool cleaner after it does its job so that no debris recirculates back into the pool.
Do you remove skimmer basket when vacuuming pool?
No, generally you should not remove the skimmer basket when vacuuming a pool. The skimmer is designed to catch large debris as it passes through and keep it out of the circulation system. If you were to remove the skimmer basket, it could cause large debris to be passed through the system, clogging pipes and filters.
The main reason to remove the skimmer basket is when performing maintenance on the skimmer itself. For example, if you need to clean out the skimmer basket, you may need to detach it from the system.
However, this should not occur frequently and only when necessary.
One thing to remember when vacuuming a pool is to ensure the skimmer is working correctly. If there is a blockage or the skimmer is not working as it should, it may be necessary to remove the basket to free it up.
However, this should only be done after attempting to unclog it first, as it can cause a decrease in circulation and a decrease in the cleaning power of your vacuum.
