Skip to Content

Who owns SpeeCo?

SpeeCo is a leading manufacturer of power tools and related accessories and is owned by the American company Blount International, Inc. Blount International, Inc. is a global manufacturer of farm, forestry, and lawn and garden tools, equipment and services headquartered in Montgomery, Alabama.

It is a publicly traded company listed on the New York Stock Exchange under the ticker symbol “BLT”. Blount International, Inc. was founded in 1960 and went public in 1969, and it continues to be owned by the founder’s family.

As the second largest producer of outdoor power equipment in the United States, Blount International, Inc. is home to well-known outdoor power brands such as Oregon, OREGON Gator, Carlton, and SpeeCo.

Who invented the kinetic log splitter?

The kinetic log splitter was invented by Brian Taylor of Central Point, Oregon who designed and built the first one in 2006. He founded the company Log Wiz and began selling a smaller version of the splitter in 2008.

After realizing its potential to split logs up to 24” in diameter, he decided to redesign it for consumers’ larger splitting needs. In 2009, the current 48” model was brought to market.

The kinetic log splitter operates on the principle of velocity created by a rapidly moving flywheel which is then transferred to the log being cut. This design creates significantly more force than traditional hydraulic and electric splitters.

According to Brian Taylor, it has the ability to cut 60” rounds in two or three seconds and can handle up to a 36 foot long log.

Through his improvements to the kinetic log splitter, Brian Taylor has revolutionized the firewood industry. It has allowed home owners and businesses alike to chop their own wood quickly and effortlessly, while saving them time and money in the process.

What type of oil does a log splitter take?

A log splitter typically takes an engine oil that is typically classified as a 10W-30 motor oil. This motor oil should be specifically designed for use in 4-cycle engines and should comply with API Service Classification SJ, SL, SM, SN, or higher.

If the log splitter is used heavily, it may be recommended to use an SAE 5W-30 oil alternatively. Some log splitters may also require synthetic oil which can be a more expensive option. It is best to consult your owner’s manual in order to determine the type of oil that is best suited for your particular log splitter.

It is important to note that using the wrong oil can damage your splitter’s engine, so it is important to make sure you get the right type. Additionally, oil should be checked regularly and changed when necessary for optimum performance.

How often should you change the hydraulic oil in a log splitter?

Hydraulic oil should be changed in a log splitter every 300-500 hours of use or every two years, whichever comes first. If a log splitter is used infrequently, the oil should still be changed every two years in order to keep it fresh and protect the engine.

It is also important to check the oil at least once a season to ensure it is at the proper level and has not become contaminated with water, dirt, or other particles. Changing the oil in a log splitter is a straightforward process that requires only a few tools and basic knowledge of the machine.

It is best to refer to your manual for specific instructions on how to complete the task.

What oil is used in hydraulic systems?

Hydraulic systems use a variety of oils including petroleum-based (mineral) oil, synthetic oil such as polyalphaolefin (PAO) and polyalkylene glycol (PAG), and bio-based oils such as vegetable oils. Depending on the application, mineral oil may be the most economical choice; however, its viscosity, thermal stability and oxidation resistance are lower than that of synthetic oil.

Synthetic oils provide better lubricity and wear protection, operating temperature range and are usually better in terms of oxidation stability than mineral oil. PAG and PAO synthetics can provide even better wear protection and thermal stability than other synthetics.

Vegetable oils are considered to be a “green” option and can provide similar performance as synthetic oils; however, due to their high cost, they are typically only used in very specialized applications in small quantities.

How much hydraulic oil do I need?

The amount of hydraulic oil you need depends on the size and type of the hydraulic system you are servicing. Generally, the rule of thumb is a gallon per horsepower (HP) of motor-driven system, but this is subject to change depending on the size, type and application of the system.

Usually, it’s best to check with the manufacturer to determine the correct amount or you can consult an experienced technician who can guide you in the right direction. As a general guideline, some common types of system require, for example:

• Small machinery (1-3 HP): .5 gallons

• Forklift trucks and other commercial equipment (5-20 HP): 3 gallons

• Industrial machinery (20-40 HP): 6 gallons.

It’s always important to read and follow safety instructions when handling hydraulic oil as it is a highly flammable and hazardous material. Moreover, ensure you check the oil type and grade to ensure it’s suitable for the system you are working on.

Why won’t my log splitter split wood?

There could be a number of reasons why your log splitter won’t split wood. If the machine won’t turn on, the motor could be broken or the safety switches could be stuck. If the motor is running but the log splitter isn’t actually splitting the wood, it could mean that the cylinder isn’t properly pressurized or the hoses or seals are worn or damaged.

It might also mean that the wedge on the log splitter isn’t sharp enough or that the machine isn’t adjusted properly. It could also mean that the wood is not being properly supported and the splitter isn’t pushing the logs apart evenly or that the logs are too large for the splitter.

If your logs are being split but the wood is being thrown out of the splitter, it could mean that the pressure release valve is set too low. It’s also possible that the table or other components of the log splitter are bent or worn out.

Finally, it could mean that there is something wrong with your fuel mix or air filter. If you’re unable to troubleshoot and repair your log splitter yourself, it’s best to contact a professional for assistance.

Do electric log splitters need hydraulic fluid?

No, electric log splitters do not need hydraulic fluid. Most electric log splitters use a motor and a hydraulic ram to force the blade through the log. Instead of relying on hydraulic fluid to power the motor, the electric motor is powered by electricity and generates enough torque to force the blade through the log.

This means that electric log splitters generally require less maintenance and are easier and faster to use than standard hydraulic log splitters.

How do I check the oil in my electric log splitter?

In order to check the oil in an electric log splitter, you will need to look for a dipstick or oil-level check window, typically located near the motor or the axles in the splitter. If your splitter does not come equipped with a dipstick, you will need to open the engine compartment and locate the oil-fill cap.

Before you check the oil, make sure that the log splitter is turned off, and unplugged.

Once you have identified the oil-fill cap, wipe it off with a clean rag to avoid transferring any outside material that could affect the oil within the engine. Dip the tip of the dipstick into the oil and pull it out.

Examine the oil, and it should read full if there is a marking on the dipstick. A full reading will typically indicate that there is at least a quart of oil in the engine. If the oil is low, you will need to add more by pouring it into the oil-fill cap.

Replace the cap after filling and check the oil level again.

If your log splitter does not come equipped with a dipstick or oil-fill cap, you will need to locate a fill port located behind the motor and attach a funnel. Add oil to the funnel in small increments and wait a few seconds to allow it to settle.

Repeat this process until the oil begins to drip out of the fill port. Before starting the log splitter, be sure to check the oil level again.

Why is my wood splitter so slow?

The speed of a wood splitter depends on a few factors, including the type of motor, the size and strength of the motor, the type of wood being split, the cutting head size, and how the machine is maintained.

A slow wood splitter could be caused by any or all of these factors.

The type of motor is an important factor, as different motors can cause speed differences. Generally, electric motors are slower than gas powered motors, as gas motors are more powerful. Make sure you’re using the appropriate motor for your wood splitting needs.

The size of the motor could also be an issue. If the motor is too small for the job, the wood splitter won’t be able to generate enough power. Similarly, if the motor is too large, it may be burning up electricity without actually splitting the logs.

The type of wood can also have an impact on a wood splitter’s speed. Harder woods like elm, oak, and maple will require more power to split than softer woods like cedar and pine.

The size and shape of the splitting head can also affect performance. Smaller heads are less effective than larger heads. If the splitting head is worn, it won’t generate enough power and won’t be able to effectively split the logs.

Finally, regular maintenance is key. Dull blades, worn electrical components, and dirty air filters can all contribute to reduced performance. Make sure to check your wood splitter regularly and replace or repair worn parts.

Overall, the cause of your wood splitter’s slow performance may be due to any one of these factors. Identify the cause and address it to optimize your wood splitter’s performance.

What is a good tonnage for a log splitter?

When choosing a log splitter, it is important to consider the size and weight of the logs you wish to split. Generally, a log splitter with a minimum tonnage of 15 will do the trick for logs up to 16” in diameter and around 24” in length.

However, if you plan to regularly split longer or larger logs, consider investing in a splitter with a higher tonnage rating. For example, a 25-ton log splitter may be better suited for logs up to 20” in diameter, and a 34-ton splitter will do the job for logs up to 27” in diameter.

It’s also important to look for a log splitter with adjustable wedge for more efficient splitting and a stable base for better balancing. Lastly, ensure the splitter you choose is powerful enough to handle the projected job load.

What are some good log splitters?

Making it easier to efficiently and safely split logs without causing harm or damage.

The YARDMAX 28 Ton Horizontal & Vertical Gas Log Splitter (YU2866) is a great choice for anyone looking for a powerful, efficient, and durable log splitter. It has a 277cc Kohler engine and a quick cycle time, allowing for maximum splitting efficiency with minimal effort.

It’s also equipped with an adjustable wedge height, so it can handle logs of different sizes and densities.

The Swisher LS22E Electric Log Splitter is another great option. It has a powerful motor that is capable of splitting logs up to 16” in diameter and 21.5” in length. It also has an adjustable height system so that it can accommodate logs of different sizes.

The Champion 96456 22-Ton Horizontal/Vertical Gas Log Splitter is an incredibly powerful log splitter that is capable of splitting all types of logs with ease. It has a 224cc engine with a hydraulic cylinder capable of producing up to 22 tons of splitting force.

It also has an adjustable wedge height to accommodate logs of different sizes.

Finally, the WEN 56207 6-Ton Electric Log Splitter is an affordable and reliable splitter that is perfect for anyone who needs to split logs with minimal effort. It has a 15A motor and a 6-ton splitting force, making it more than capable of handling logs up to 10” in diameter and 20” in length.

No matter which log splitter you choose, you can be sure that you’ve made a quality purchase that will serve you well for years to come.

What size log can a 25 ton log splitter split?

A 25 ton log splitter can split logs up to 24 inches in diameter and up to 8 feet in length. If a larger log is placed on the splitter and the weight of the log exceeds 25 tons, the splitter will not be able to cut and split it.

When using the log splitter, the size and weight of the log must be taken into consideration as this will determine whether this machine is able to do the job effectively. Additionally, it is important to check the length of the bar on the splitter as this will have an impact on the size of the log it can split, with shorter bars allowing for smaller logs to be handled.

Is a 25 ton log splitter big enough?

A 25-ton log splitter can be big enough for personal use in many scenarios. This is especially true if the logs you’re splitting are only a few inches in diameter. For larger diameter logs, you may want to consider either a splitter with more power or one that can split logs that are longer than the length of the log splitter bed.

If the logs are for commercial use, a 25-ton log splitter might be too small. In that case, you should consider a log splitter with at least 36 tons of splitting power, as these can be capable of splitting large, hardwood logs.

Either way, a 25-ton log splitter can generally handle a large enough load of wood while remaining affordable and efficient. It is important to remember, however, that log splitters should never be used to slice or split metal, plastic, or any other type of debris or object.

It is important to remember to read the manufacturer’s instructions and guidelines before operating any log splitter. With the right maintenance and operating procedure, a 25-ton log splitter can easily provide many years of reliable service.

How are wood splitters rated?

Wood splitters are typically rated by their splitting force, which is measured in either tons or pounds of pressure. Generally speaking, the higher the tonnage or poundage, the more powerful the wood splitter is.

Splitting force can also be affected by the type and size of wood being split. For instance, softwoods with a wide grain will require less pressure to split than a denser hardwood, such as oak.

The range of splitting force generally starts at two tons (or pounds) and can go up to 16 tons depending on the manufacturer. Professional-grade models typically offer the highest level of splitting power, while residential-grade models may offer between four and six tons of splitting force.

The amount of force needed to split the wood is also affected by the type of splitting blade. Two of the most common blade types are fixed splitter blades and patented quick-change splitter heads. Fixed splitter blades can only accommodate a limited range of sizes and types of wood, whereas quick-change splitter heads provide greater flexibility and allow users to switch from smaller logs to larger ones in a matter of minutes.

For the most accurate rating of a wood splitter, it is best to look for independent testing results or to purchase one that has been certified by an accredited third-party organization. This will ensure that the wood splitter has been independently tested for performance and power.