First, you may need to adjust the motion sensitivity settings. This can be done through the Blink app. By adjusting the sensitivity to the proper level, you can make sure that your cameras are accurately detecting motion.
Another possible cause could be the location of the camera. Make sure your cameras are not pointed at a window or near a heat source, as these can cause false alarms and your camera may not detect proper motion.
Also, ensure that your camera is not in a dark area, as this can also impact its ability to detect motion.
Lastly, if your camera has recently experienced a power outage, its settings may have reset to the default settings. You should double check your settings to make sure they are set up to your preferences.
If none of these fixes solve your issue, you may need to contact Blink customer service. They can help you determine the cause of the issue and provide you with a solution to keep your Blink cameras working properly.
How do you reset a Blink camera?
To reset a Blink camera, you will need to locate the reset button located on the back of the camera. It is a small circular button with a hole in the middle. Once you locate it, you should press and hold the button for at least 10 seconds.
You should then be able to see the LED status light on the front of the camera start to blink, indicating that the camera is being reset. Once the reset is complete, the LED light will turn off.
You may also need to reset the wireless connection between the camera and your Blink app. To do this, you will need to open the Blink app and find your camera in the device list. Once you’ve located it, select the camera and tap on “View/Edit.
” You should then see a “Remove Blink Camera” option. Tap on it and confirm the action, and your camera’s connection should be reset.
Where is the reset button on Blink module?
The reset button on the Blink module can be found on the side of the unit, towards the bottom. It is a small button, typically labeled “RESET”, and when pressed, will reset the module and its settings.
Depending on the model, the button may be recessed, requiring a thin object like a paperclip or pen to press it. After pressing the reset button, the module will reset and will typically require a few minutes for the settings to fully reset.
How far can Blink camera be from Sync module?
The Blink camera can be up to 150 feet away from the Sync module. In order for the camera to be connected to the Sync module, it must be within range of the wifi router with line of sight to one another.
The camera has an extended range with the Blink Extender (sold separately), which extends its range up to 300 feet from the Sync module. The Blink Extender also increases its connection strength and quality, ensuring reliable performance.
Can I delete my Blink account and start over?
Yes, you can delete your Blink account and start over. To do so, you will need to open the Blink app and go to the Settings page. Then, click on the ‘Delete Account’ button. This will remove all your data, including any recordings or settings that have been configured.
After deleting your account, you will be able to create a new account with a new username and password.
Can you save Blink videos without subscription?
Yes, you can save Blink videos without a subscription by downloading the clip you want to save prior to leaving the Blink service. To do this, simply open the Blink app and select the clip you wish to save.
Next, select the ‘Download’ icon in the lower right corner of the clip. This will begin to download the clip to the device. Once the download is complete, the clip will be available for you to view and keep, regardless of your subscription status with Blink.
How long does Blink cameras store footage without subscription?
Blink Cameras can store footage without a subscription plan, however, the length of time depends on the camera model you have. For example, the Blink XT2 Camera will store up to 7,200 seconds of video footage or approximately two hours of footage at the free tier.
You can also store up to two hours of footage with older Blink Indoor Camera, Blink XT Camera, or the Blink Outdoor Camera. With a Blink Subscription Plan, you can store up to 60,000 seconds of video footage, or approximately 16 hours of footage.
Keep in mind that all of the footage stored on your Blink Cameras is still subject to local storage limitations. So, if you reach the two-hour limit, older footage is overwritten.
What happens when Blink free trial ends?
When your Blink free trial ends, the software will stop collecting data and all of the data collected during the trial will remain accessible for you to review. You will be asked if you want to continue using the software or if you would like to cancel your subscription.
If you choose to continue using the software, then you will need to pay for a monthly or annual plan in order to continue using the software. Depending on the plan you choose, there may be additional features, integrations, and support available to you.
If you choose to cancel your subscription, you will retain access to the data you collected during your free trial and you will be able to carry those results over to your new subscription if you choose to sign up again.
What is the outdoor security camera without a subscription?
An outdoor security camera without a subscription is one that does not require a monthly or yearly payment to access the camera’s features. These cameras may also feature local storage in which all of the content is securely stored on the camera itself.
Some outdoor cameras may come with a free basic subscription plan like a limited cloud storage allowance or basic motion alert notifications, although it is not required. Other cameras may not come with a subscription at all and rely solely on the local storage already on the camera.
While they may not provide the same feature set as a camera with a subscription plan, these cameras can still provide a reliable security measure for the outside of your home or business.
Is there a monthly fee for Blink camera?
Yes, there is a monthly fee for the Blink camera. It starts at $3 a month for one camera, and then for each additional camera added, the cost increases. The fee covers cloud storage, recordings, and notifications.
It also does not limit the total number of cameras under the same account, making it an affordable option for homes and businesses looking for multiple cameras. Furthermore, the Cloud storage feature allows you to store up to 4 hours’ worth of motion-activated clips, giving you access to your recordings whenever needed.
Can you use a Blink camera without a sync module?
Yes, you can use a Blink camera without a sync module. In fact, Blink makes it easy to choose whether to use a sync module or not when setting up a camera. To do this, you select the “Use Existing Camera” setup path when completing the Blink mobile app setup process.
When this option is selected, you can quickly set up and connect the Blink camera directly to your home Wi-Fi network without the need of a sync module. This setup path is recommended if you already have a Blink camera and do not need to add more to your system.
Keep in mind that the camera can still be connected and used with the sync module if desired to take advantage of additional features such as enhanced battery life and unlimited video storage.
Does Blink work if Wi-Fi goes out?
No, Blink does not work if Wi-Fi goes out. Blink’s core functionality relies on Wi-Fi and an internet connection to operate. Most of the features, such as motion detection, live streaming, and remote access, depend on a secure and stable Wi-Fi connection.
Without Wi-Fi, Blink’s key features will not work. However, the cameras can still record video with the Connected Technologies bridge, which will store the video on an onboard SD card. This means that you may still have video footage of your home in the event of a Wi-Fi outage, but it will not be accessible via the Blink app until your Wi-Fi is restored.
Do Blink cameras have local storage?
Yes, Blink camera systems do have local storage. The Blink camera systems come with a Sync Module, which helps you store and protect your videos directly to your device. You have the option to store videos locally on the Sync Module or in the cloud.
The local storage allows for quicker access for your video recordings, as they are stored directly on the Sync Module. You can also customize the length of your recordings, so you never miss important moments.
The Sync Module has a USB port that makes it easy to store your videos locally on an external storage device (e. g. , a USB flash drive). With local storage, you can easily review your recordings and export them to share with other people.
How many Blink cameras can you have on one module?
It is recommended that you limit the number of Blink cameras to eight or fewer on one module, as having too many cameras could cause connection issues and put stress on the module. We recommend placing no more than three Blink cameras in the same room.
Additionally, having more than eight cameras on one module may result in a decrease in the overall battery life of the cameras.
What does red light mean on Blink camera?
When the light on Blink camera is red, it typically indicates that the camera is offline. This might be because it is not connected to the Blink Sync module, or it may be that the battery within the camera is low.
To check why the camera is not connecting, you should open the Blink app on your phone. You will then be able to check the camera’s signal strength and signal quality by tapping on the little ‘i’ icon next to the camera’s name.
If the signal is weak, try moving the camera or its Sync Module closer to the router to improve the connection. Alternatively, if the camera continues to flash a red light even after adjusting the signal strength, the battery might need replacing.
Change the battery by pressing down on the screw in the rear of the camera and patiently waiting for the cover to open. The old battery can then be removed and a new one inserted.
Why is the green light on my Blink camera flashing?
The green light on your Blink Camera is flashing for a few different reasons. If the camera is charging then that is the most common reason for the green light to be flashing. If the camera is already fully charged and the light is still flashing then that means the camera is in an idle state.
This can happen when the camera has not had any activity for a while, so the light will be flashing to signify that the camera is still powered on and ready to capture activity. If you have recently had recent activity then the green light should stop flashing and go completely solid.
How do I turn the blue light off on my blink camera?
Turning the blue light off on your Blink camera is a straightforward process that only requires a few simple steps. First, open the Blink app on your smartphone. Under the Devices tab in the app, select your Blink camera and navigate to the LED Settings screen.
You should see two options: LED Activity indicator, which is the blue light, and LED Off Time, which sets how long the blue light stays on before turning off. Select LED Activity indicator and toggle it off.
This will turn the blue light off and you should be good to go. If you don’t want the blue light to come back on, toggle the LED On Time setting so that it doesn’t turn back on. That should do the trick, and you should now have successfully turned off the blue light on your Blink camera.
Can someone hack my blink camera?
Yes, it is possible for someone to hack your Blink camera. Hackers can gain access to your Wi-Fi network or use other methods to get into the system and view your camera’s footage. To help protect yourself from potential hackers, you should be sure to enabling two-factor authentication and always creating strong, unique passwords for your Blink camera.
Also, make sure you regularly update the camera’s firmware and check that you’re running the latest version. Additionally, it’s important to remember that your router and modem are also potential targets for hackers that could give them access to either your Blink camera or your entire home network.
Make sure to check and change the default password of your router and keep the firmware updated regularly.
Why is my Blink flashing blue and solid green?
If your Blink device is flashing blue and solid green, it could mean that there is an issue with your device that needs to be addressed. Usually, this indicates a device issue, like an issue with the battery, an issue with the wiring, or an issue with the Blink sync module.
In some cases, this could also indicate a software or firmware issue.
To rule out any hardware or firmware issues, first make sure that the battery is charged or replaced with a new one. You should also check the wiring and make sure all connections are securely tightened to their appropriate port.
Additionally, try unplugging and replugging in the Blink sync module to see if this resolves the issue.
If the issue persists, you will need to update the firmware on your device. You can do this by logging into the Blink app on your phone, then going to your Blink devices. From there, hit the “software” button and follow the instructions to complete the update.
Once you have done these steps, if the issue is still unresolved, contact Blink’s customer service team and they will help you troubleshoot the issue further.
