Skip to Content

Why isn’t my Elgato recording game audio?

There could be a few reasons why your Elgato isn’t recording game audio. First, you should make sure that the audio source selection in the Elgato software is set to the correct input. Depending on your setup, you should select either ‘Default Audio Device (Game Capture HD)’ or ‘Sound Card (HD60 Pro)’ from the drop-down menu.

It’s also possible that the input volume is too low. Try adjusting the volume levels in the Elgato software, as well as in Windows or Mac OS. If that doesn’t work, check your cables to make sure they’re properly connected, and try restarting the Elgato software and your computer.

Finally, if you’re still having issues, make sure that the audio being outputted by the game is set to stereo, as some games don’t support surround sound audio when streaming. If you’re still unable to get it working, it may be necessary to get your Elgato device serviced.

How do I get the game audio on my Elgato?

To get the game audio on your Elgato, you will need to connect it to your PC/Mac or gaming console. Depending on which device you are using, there are different ways to get the game audio on your Elgato.

PC/Mac:

If you are using a PC or Mac, the easiest way to get the game audio is by connecting a 3.5mm audio cable from the headphone jack of the Elgato to the line-in or microphone jack on your PC/Mac. If you need to increase the audio level, you can adjust the volume by going to the Elgato software settings or by your computer’s audio settings.

PS4/Xbox One:

If you are using a PS4 or Xbox One, you will need an additional audio adapter such as the Elgato Chat Link. This adapter allows you to connect the headphone jack on your Elgato to the game controller.

Once the adapter is plugged in, the game audio will be streamed directly to your Elgato.

Nintendo Switch:

For the Nintendo Switch, you will need the Elgato Game Capture HD60 Pro and the Elgato Chat Link. This allows you to capture the game audio through the headphone jack on the Elgato as well as the microphone jack on the chat link.

With this setup, you will be able to capture the game audio through both ports.

With all of these different methods, you should be able to get the game audio on your Elgato. It may take some time to set it up so be patient and follow the instructions to the letter. With a little bit of patience, you’ll have your Elgato up and running with no problems. Good luck!.

Good luck!.

Can you hear game audio through Elgato?

Yes! You can connect a game audio source to the Elgato Game Capture HD60S or Elgato Game Capture 4K60 Pro and record the sound. This will be recorded directly to your computer and you can hear the game audio through your computer’s speakers or headphones.

You can also route the audio directly to your streaming software so that you can talk over the game audio while streaming or recording.

Why cant my stream hear the game?

There can be several potential reasons for why your stream might not be able to hear your game. The first thing to check is to ensure that the input settings are configured correctly. For example, on PC you’ll need to check the settings in the sound control panel to make sure that the game is set as the ‘default playback’ device.

Additionally, you might also have to check the stream settings to make sure that the correct audio sources and/or channels are selected.

Another potential reason could be because of a slow or unstable internet connection. If the connection is too slow, it might cause the stream to lag or buffer, which can affect the audio quality of the stream.

You should also check to make sure that your microphone is correctly set up if you’re streaming with voice chat. If the microphone is not set up correctly, then the stream will not be able to pick up your game audio.

Finally, it could be because of a glitch or a bug in the software you’re using to stream. If the software you’re using to stream isn’t updated, then it could be causing the issue you’re having. Try updating the software to the latest version and see if that resolves your issue.

How do I record game audio?

Recording game audio is relatively simple, depending on the type of game and recording software that you are using.

If you are playing a single-player game, you will need to use a video capture card or USB microphone to record the audio. To do this, simply connect the microphone to your PC, adjust the video capture card settings and ensure your recording software is configured to capture the game audio.

If you are playing an online game, such as an MMO, you can use software to record the audio. To do this, download and install a software like Audacity or OBS, which will allow you to capture the audio from the game.

Once you have the software installed and configured, you can start recording and you will be able to hear the game audio.

It is also possible to record game audio using a professional recording setup. This requires more audio and software equipment, as well as a knowledge of audio engineering and recording techniques. Using this type of setup can be more expensive, and you will need to know how to adjust the settings of your audio equipment to capture the game audio.

Regardless of how you record the game audio, it is important to make sure that you have sufficient memory and disk space. This is because game audio files can be quite large and have to be stored correctly.

How do you get audio from capture card OBS?

Getting audio from capture card in OBS is relatively simple. First, make sure you have the correct capture card and that it is connected properly to your computer. Then, open OBS and select the Settings tab.

Under the Sources dropdown, select ‘Add’ and then select ‘Video Capture Device. ‘ From the options that appear, select your capture card and click ‘OK. ‘ Once your card is added as a source in OBS, you can click on the Gear icon next to the source name and go to the ‘Audio’ tab.

Here, select the ‘Audio Input Capture’ option for the audio device. From the dropdown menu, select the audio source that corresponds to your capture card. You may also need to adjust the other settings within this tab, such as the Volume or Setting Mode, to ensure that the audio is coming through correctly.

Finally, you can click ‘OK’ and you should be able to hear the audio that is being captured by your capture card in OBS.

How do I listen to audio while streaming?

To listen to audio while streaming, you will need to first make sure your device is compatible with the streaming service. If the streaming service offers audio, then you should be able to listen to the audio while streaming.

Usually the streaming service will have a way for you to turn the audio on or off, such as a toggle button or a volume control feature. Once you have the audio turned on, you will be able to hear it while streaming the video.

Depending on your device, you may also have the option of selecting different audio settings such as bass, treble, or sound balance. You may also be able to adjust the audio in terms of its volume level or pitch.

How do I hear audio on OBS?

In order to hear audio on OBS (Open Broadcaster Software), you will need to first configure your audio settings to make sure the proper devices are being used. To do this, open up OBS and select ‘Settings’ from the menu on the left side.

Then, navigate to the ‘Audio’ category. Here you can select which devices you would like to use for playback of audio. Make sure to select the proper ‘Device’ from the list of options so that OBS can access the device itself.

Once you have set up your audio devices, you will need to be sure you have the Audio Monitoring feature enabled in OBS. This can be done through the same ‘Settings’ menu as you used for selecting your audio device.

In the ‘Audio’ tab, click the ‘Advanced’ option located at the bottom of the page. There you will be able to check the box that says ‘Enable Audio Monitoring’.

Finally, you will need to actually listen to the audio in OBS itself. To do this, you will need to add a source to your OBS project. To do this, simply right click an empty area on the main OBS window, and select ‘Add’ followed by ‘Audio Input Capture’.

This will bring up a small configuration window. Set the proper device in the first drop-down menu so that OBS knows which audio device to capture audio from. Then, hit ‘OK’ and you’re all set! You should now be able to hear audio coming through OBS.

Does Elgato pick up game audio?

Yes, Elgato does pick up game audio. Elgato makes a range of game capture hardware which allows you to record and stream your gaming sessions. All of these devices feature HDMI or Component video pass-through so you can record your audio and video in sync.

The devices also feature a 3.5mm ‘Game’ port, which is designed to pick up your game’s audio from the consoles. This audio is also passed through to your PC, allowing you to record or broadcast both the audio and video from your games.

Elgato also offers software solutions for those who want to record or stream PC games. The Elgato Game Capture HD software includes a built-in audio mixer that makes it easy to add music, sound effects, and microphone audio to your recordings.

Does Game Capture capture game audio?

Yes, Game Capture is capable of capturing game audio. Depending on the hardware you have, you can capture game audio as well as video. If you are capturing your game play off a console, you may need to plug your game console into the game capture device via an RCA or audio/video cable.

Next you will need to select the audio source you wish to capture. For example, if you are using an Elgato Game Capture device, you can open the settings menu, and select the “Audio Input” tab. There, you will be able to select the microphone input, or the audio-in coming from your console.

If you are using a computer, you will most likely need to select the “Stereo Mix” or “Wave Out” from the audio settings. Once you have selected the proper audio input, the game capture will capture both game audio and video.

Why can’t I hear my game audio on my stream?

It is possible that you are not connecting the right audio devices to your streaming software, or you may not be streaming with a compatible streaming software. First, make sure that you are connecting the right audio device(s) to the correct audio settings in the streaming software.

Some streaming software requires that the game audio and mic audio devices are set up separately. Make sure your settings are correct and check to see if you are able to hear the game audio in your stream.

If your audio settings are set correctly, or if you’re using a compatible streaming software, then the issue could be caused by latency or a lack of performance from your computer. To check, try streaming a different game or application and see if you can hear the audio for that game or app.

If you can hear the audio then you know it’s a performance issue with the game you’re trying to stream.

If the issue persists, you may need to upgrade your computer’s hardware to improve performance or look into other streaming options, such as using a dedicated streaming system.

How do I hear audio through my Elgato and headset?

To hear audio through your Elgato and headset, you’ll need to plug your headset into the Elgato to start. Depending on your computer and headset, this can be done via a 3.5mm jack or USB port. Then, you’ll want to configure the audio settings on your software and operating system.

In your Elgato software, you’ll want to make sure that the correct audio output is selected to ensure you hear audio through the headset. On your computer, you’ll need the correct audio driver to ensure audio output.

You can usually download these drivers from the manufacturer website. After the driver is installed, you’ll need to open your sound control panel and select the headset as the default device for output.

If you have difficulty getting audio output, you may also need to adjust a few sound and mic settings.

How do you get capture card audio on discord?

Getting audio from a capture card on Discord is a straightforward process. The first step is to connect the card to your computer. Make sure thecard is fitted with all the necessary cords and you have downloaded and installed all the necessary drivers.

Once connected, you’ll need to open the Sound Settings in Windows. Go to the Recording tab, right click anywhere and select Show Disabled Devices, and make sure that Stereo Mix is enabled.

Next, open up the Discord settings and, in the ‘Voice & Video’ tab, change your audio input to Stereo Mix. This input may be called something else on different manufacture’s cards. Check the documentation for your specific card, or contact the manufacturer for support.

Once the name is correctly changed, you should see a Raw Meter on the overlay, with audio being streamed from the capture card through Discord. To check the audio is being streamed, join a call with multiple people and make sure that only audio from the capture card is being outputted through the speaker or headset.

If everything is working, you’re good to go! Make sure that you mute or lower the volume of Discord in the sound settings to avoid feedback noises. It’s also important to make sure that the capture card audio is turned up nice and loud and that the right game audio is being sent to the capture card.

Finally, if you’re having trouble with any step, check the documentation of your capture card or contact the manufacturer for help!