Yes, Roman shades can be longer than the window. Depending on the length of the window and the desired look of the shade, some window treatments may be longer than the window itself. For example, if you want the lower edge of a Roman shade to hang down past the window height, then the shade can be made longer.
Additionally, you may wish to create a more dramatic look by having the top edge of your Roman shade cover the entire window rather than just the edge. In this case, the window treatment will need to be longer than the window it is covering.
Do roman shades need to be the exact length?
No, roman shades do not need to be the exact length. Typically, you can allow for a few inches on either side as a cushion, as this will make them easier to install and make them look better when hung.
A general rule of thumb is to make them at least 1/2 inch narrower than the width of the window opening, but you can always adjust the length slightly if needed. If you have standard size windows, it might be a good idea to order the standard size shades, as these are typically pre-cut to fit most windows.
You can also custom order shades that are made to fit your exact window size, but this typically results in a longer lead time and higher cost.
Do roman shades have to cover the whole window?
No, Roman shades do not always have to cover the whole window. Generally, it is recommended that the shade fully covers the window to ensure that the structure is secure and the window is properly sealed, but there are several types of Roman shades that can be used to partially cover the window in certain styles of design.
For instance, roman shades are available with cut-outs to make them appear more decorative and can be fitted to the frame so that they do not need to extend the full length of the window. Shades can also be designed with a valance to give the illusion of full coverage without having to cover the entire window.
Ultimately, Roman shades are versatile and with a range of options available, you can find the right solution to suit your window and design needs.
Should Roman blinds touch the window sill?
Roman blinds should not touch the window sill. The most ideal way to hang them is a few inches above the sill so that when they are open, the material does not touch the sill and get soiled or creased.
It is also recommended for safety reasons that the blinds are slightly higher than the bottom of the window, as this reduces the risk of the blinds being reached by curious children. When it comes to practicality, a slightly higher installation will also help to prevent any drafts from entering through the small gaps between the window sill and the bottom of the blind.
How far do Roman shades hang down?
Roman shades typically hang anywhere from 6 to 8 inches below the window trim or sill. This allows them to have a tailored, “crisp look,” but you can also hang them as low as 12 inches to create a more lavish look.
Whether you choose a more tailored or longer look, keep in mind that the size of the window should be taken into account when determining how far below the window trim you should hang your shade. For windows larger than 54 inches in width, an 8-inch drop may not provide enough coverage for your window, and you may want to opt for a longer drop.
Additionally, if you hang your Roman shades too low, you can create an awkward look or cut off the light coming into the room.
How deep do windows need to be for Roman shades?
When considering the depth of windows for Roman shades, the depth of the window will depend on the type of shade that you are looking to install. If you are looking for a traditional Roman shade, the window will need to be at least 3 inches deep for single shade or two shades together.
This depth is needed for the shade rings to fit into the pocket along the top of the window and to allow for proper operation of the shades. If you are instead planning on using a relaxed Roman shade, the window can be slightly shallower, with a minimum depth of 2 inches.
If you are looking to install a full Roman shade with a customized hem, you will need the full 3 inches of depth in the window.
When measuring the depth of your window, you will want to start by measuring the top of the window and then moving your way down the sides, paying close attention to any decoration or woodwork that may be up against the window.
If there is any that overlaps the window, it may need to be removed, in order to properly install the shades. In addition to measuring the depth of the window, be sure to measure the height and width as well to ensure that your desired shade will fit.
How should Roman shades fit in window?
Roman shades should fit in windows well and cover the entire window. They should fit against the window frame snugly, without sagging or wrinkling. The top of the roman shade should align with the top of the window, and the bottom of the roman shade should hang just a few inches above the sill.
All sides of the roman shade should fit snugly against the window frame for a neat, attractive look. Take into consideration any rods or hardware that must fit within your window casing. Measure carefully to ensure the shade fits appropriately.
Do Roman shades provide privacy?
Yes, Roman shades provide privacy depending on the type of shade and fabric selected. If you choose a light-filtering or room-darkening fabric, you will get a high degree of privacy. Room-darkening fabrics will block most incoming natural light, making it difficult for people outside to see into any room.
If you select a light-filtering fabric, it will still provide some privacy while also allowing natural light to come in. Light-filtering fabrics will also provide some UV protection. The type of installation you choose can also impact the privacy level of your Roman shades.
For added privacy and light control, you can opt for inside mount or ceiling mount installation, which will allow the shade to be installed deeper into the window jamb, blocking any gaps between the wall and the shade itself.
Can you mix blinds and Roman shades?
Yes, you can mix blinds and Roman shades in your window treatments. This can be a great way to bring some visual interest to a room and is also a great way to provide both functional light control and a stylish window treatment.
When mixing blinds and Roman shades, you can play with different shades of color to provide some contrast and create an interesting aesthetic, or you can choose complementary colors for a more subtle look.
You can also vary the length of the blinds and Roman shades to create a layered look that works with different level windows. Keep in mind that the blinds will usually allow more light control than the Roman shades, so if you need more privacy, go for a combination of both.
Lastly, make sure to choose high-quality fabrics for the shades, which will increase their longevity and ensure that they look great for years to come.
Do Roman shades go inside or outside mount?
Roman shades can be mounted either inside or outside of the window frame. The decision between an inside or outside mount for Roman shades should be based on the size of the window, length of window, styling of the room and frame depth.
If you choose a standard inside mount for your Roman shades, you should make sure the window frame is deep enough to accommodate the mount and the shade’s operating system when the shade is in the open position.
Additionally, the window should be at least two inches longer than the widest width of the Roman shade.
If the window frame is too shallow or the window too short, you can opt for an outside mount which allows you to install the shade directly onto the wall or trim. When calculating the size of the mounting space for the outside mount, you should allow for at least three inches of clearance on each side of the window frame, this will ensure that the shade operates smoothly.
In addition, you can also choose to mount the Roman shades higher or lower than the window frame, creating a layered effect on your windows. What’s more, outside mounting of Roman shades also helps to reduce light gaps and create more privacy.
However, be mindful of how far down you plan on mounting the shades as this can affect the functionality of the shade’s functionality.
Where do you put Roman shades?
Roman shades can be hung on any window that has a window frame. Typically they are hung on the outside of the window frame, although they can also be mounted on the inside of the window frame if desired.
Roman shades may also be hung on the wall adjacent to the window if desired. When selecting the window, be sure to consider the amount of light desired in the room, as well as the size of the window in order to select the correct size Roman shade.
Be sure to install the shades with all of the hardware that is provided and to follow the manufacturer’s instructions carefully.
Do Roman blinds look better in the recess?
Yes, Roman blinds often look best when placed in the recess. They provide a warm, traditional look to a window, and as they hang from the top of the window, they fit neatly into the recess. As they are flat when opened and take up very little space when raised, they are a great choice for smaller windows.
They are also available in a wide range of fabrics, so you can be sure to find the perfect material and color to complete the look of your room.
What is the difference between Roman blinds and Roman shades?
Roman blinds and Roman shades are both window treatments that feature a series of overlapping fabric panels that fold when retracted. However, there are some key differences between the two.
Roman blinds are typically made of lighter weight, sheer fabrics that help filter light and reduce glare, while Roman shades are usually composed of heavier, opaque fabrics. Roman blinds have a slim profile, with the front of the blind facing the room, and a simple cord or chain pulley to open and close them.
In contrast, Roman shades have a more pleated appearance, a continuous loop cord, and generally offer more blackout options than Roman blinds.
Another difference between Roman blinds and Roman shades is in their installation. Roman blinds are mounted on either the inside of the window frame or on a thin metal bar attached to the wall above or to the side of the window, while Roman shades are mounted outside the window frame.
When it comes to maintenance, Roman blinds can usually be wiped down or spot-cleaned, while Roman shades are usually best suited for a professional cleaning to preserve the integrity of their look and shape.
All in all, Roman blinds and Roman shades can instantly enhance the look and feel of any room, and can provide a range of benefits such as increased privacy and temperature control. While similar, their differences make them suitable for different requirements and design styles.
How does a Roman shade work?
Roman shades are a type of window covering that can be used to block out the sun while still offering privacy. They work similarly to a regular window shade—typically with a draw cord or lift cord at the bottom, which you can use to raise or lower the shade.
When the shade is in its lowered state, fabric panels overlap in neat, accordion-like pleats, creating an unbroken surface that blocks out light. When the cord is pulled, the pleats gently open, similar to the way a concertina or accordion works.
This allows light to filter through the window, but provides some degree of privacy since no one can see in from outside. The benefits of Roman shades include the ability to customize the way light is filtered into a space.
You can get different levels of opacity from light filtering to blackout fabrics that can give total privacy and light blockage. The range of fabric styles available also makes them an aesthetically pleasing option for any interior design style.
Can you see through light filtering shades at night?
No, you cannot see through light filtering shades at night. Light filtering shades are designed to reduce the amount of light that enters into a room, and so they won’t allow any outside light to pass through when it is dark outside.
Light filtering shades are typically made of a thicker material than regular shades, and the fabric is made of a material that blocks out most of the light coming through the window. This means that if you use light filtering shades at night, you won’t be able to see anything outside the window, even in scenarios when the moon or street lights are beaming light into the room.
How many folds should a Roman shade have?
The exact number of folds you should use for a Roman shade really depends on the width and length of your window. Generally, you should create between 4-6 folds, with evenly-spaced, uniform pleats that run the full length of the window.
The best way to figure out exactly how many folds you should use for your particular window is to measure the width of the window and decide how wide you want your individual folds to be. Then divide the width of the window by the width of the fold you want to create, and you will get the number of folds you will need.
For example, if you have a window that is 48 inches wide and you want your individual Roman shade pleats to be 8 inches wide, you should create 6 folds (48 divided by 8 is 6).
What are the different types of Roman blinds?
Roman blinds are a popular window treatment option that offer simple, elegant stylings and superior light control. There are a variety of different types of Roman blinds available to fit any décor or environment.
The most common type of Roman blind is the standard Roman blind, which is a single piece of fabric folded and attached to a headrail. The folds give the blind a distinctive, pleated appearance and when combined with the headrail system, offer superior light control and a tailored, hi-end look.
The advantage of the standard blind is that the fabric is completely supported, resulting in a smooth, wrinkle-free appearance when opened.
Another popular Roman blind style is the top-down/bottom-up Roman blind, which gives you the flexibility to open your blind from the top, the bottom, or both. This style allows for superior light control and privacy, and you also won’t have to sacrifice fabric coverage.
Another variation on the classic Roman blind is the Relaxed Roman blind, which is designed to look more informal and slightly puffy when the fabric is pulled up. When using a relaxed Roman blind, it is recommended to pair the blind with fabrics that have a heavier and stiffer denim or canvas construction, as the heavier fabrics will provide the optimal draping effect when the blind is opened.
Finally, if you’re looking for a less traditional style, a rippled, or soft Roman blind is a great option. This style is created by attaching a soft panel of fabric, such as sheers or a light weight top fabric, in a pleated panel across the top of the blind.
The fabric is then gathered in a ripple pattern across the full width of the panel. As a result, the fabric creates a soft, layered appearance that makes a great addition to any stylish room.
How do you fold a Roman blind into a flat?
Folding a Roman blind flat is a straightforward process. Here is a step-by-step guide for how to fold your Roman blind into a flat shape:
1. If your blind is currently hung in the window, unhang it from the window.
2. Use the rods and handles to slowly lower the blind all the way down, so it is in the closed position and all roman folds are dispersed.
3. Place your hands on either side of the blind and slowly, steadily pull down the material, creating a long vertical fold in the center, from the bottom to the top- this helps reduce the overall length of the blind.
4. Once the fold is created, pull the top and bottom edges of the blind towards each other, creating another fold in the middle.
5. Now roll the blind up, starting at the bottom and carefully rolling it up to the top.
6. Secure the roll with either a tie or a hair elastic to hold it in place during transport.
By following these steps, you will be able to fold your Roman blind flat quickly and easily.
What is a waterfall roman blind?
A waterfall roman blind is a unique and popular type of window treatment that combines the look of a conventional Roman shade and a more traditional, pleated blind. The overall effect is a cascading draped fabric with rich texture that can add sophistication and softness to any room.
The soft pleats at the top of the blind, which can be done either manually or with a ratchet system, create an elegant and tailored effect. The fabric hangs down in loose pleats, creating the ‘waterfall’ effect.
They are perfect for contemporary and modern décor, as they provide an additional level of texture and style. Waterfall Roman blinds are available in a large variety of fabric options to match any décor.
They can be used to ensure privacy and also allow for light control and temperature regulation throughout the year. They are typically used in bedrooms, for a luxurious feel, and in living rooms for a fashionable flair.
