Skip to Content

Can you mix PB Blaster and WD-40?

No, you should not mix PB Blaster and WD-40. They are both penetrating oils designed to help work on rusted or seized parts, but they are composed of different ingredients and are designed to work differently.

Mixing them can cause a chemical reaction that will not be beneficial for either product. It could also potentially create a hazardous material that is dangerous to handle or could damage the items you are trying to work on.

It is best to keep the PB Blaster and WD-40 products separate.

What is the same as PB Blaster?

PB Blaster is a penetrating lubricant and corrosion inhibitor with a unique formula that has been sitting on store shelves since 1953. It is known as one of the most popular penetrating oil options on the market, and is often used by mechanics and hobbyists on mechanical equipment that has seized due to rust and corrosion.

However, there are some alternatives to PB Blaster. Kroil Penetrating Oil is a multi-purpose oil and solvent that can penetrate tight spots, loosen frozen nuts and bolts, and even dissolve rust and corrosion.

Likewise, Liquid Wrench is another popular penetrating oil that can help loosen parts and prevent corrosion. WD-40 is another option that is often used to loosen stuck parts and stop squeaks, but it is not as strong as PB Blaster.

Lastly, Kano Aerokroil Penetrating Oil is made to provide extra penetrating action and has been known to do a good job of loosening frozen bolts and parts.

Is WD-40 and penetrating oil the same thing?

No, WD-40 and penetrating oil are not the same thing. WD-40 is a multi-purpose lubricant and penetrant designed to displace moisture and lubricate a wide range of surfaces. It is not an oil, but a silicone-based lubricant with a few other compounds added to help make it more effective.

By contrast, penetrating oil is a specialist lubricant designed to lubricate metal components and penetrate into hard-to-reach places, such as rusted or jammed parts. It will usually contain mineral oil, petroleum distillates, and rust solvents, to help it penetrate and lubricate metal.

Penetrating oil will also sometimes contain ingredients such as teflon or graphite to create a lubricating layer when it dries on the metal surface. While both products are designed to penetrate and lubricate, only penetrating oil is specifically formulated for metal surfaces.

Can I use PB Blaster as a lubricant?

Yes, you can use PB Blaster as a lubricant. PB Blaster is a multi-purpose oil and penetrant spray that is formulated to loosen stuck, seized, or otherwise stubborn components, such as nuts and bolts.

Its penetrating oil also serves as a great lubricant for preventing future rust and corrosion. It is used on all types of materials, including metal and wood. Additionally, PB Blaster is non-corrosive, non-staining, and non-conductive, making it a safe and effective lubricant for many different purposes.

What works better than WD40?

Using the right lubricant for the job is key. In many cases, a standard multi-purpose lubricant such as WD-40 will work just fine. However, there are specific products designed for specific tasks and materials that may outperform WD-40 in a particular situation.

For example, if you are looking to waterproof a metal surface and prevent corrosion, using a lubricant specially designed for the purpose, such as a penetrating lubricant with an anti-corrosion agent, may be preferable to WD-40.

Similarly, if you are working with plastic parts and are looking to reduce friction and adhere to surfaces, a light-duty silicone lubricant is likely to work better than WD-40. Basically, familiarize yourself with the different types of lubricants available and match the best lubricant to the job.

When all else fails,WD-40 will certainly do the job in many cases, but specialized lubricants may be preferable in certain instances.

Why does PB Blaster work so well?

PB Blaster works so well because it is a penetrating lubricant, which means it is designed to help dissolve rust and break through grease, dirt, and other crusty material that accumulates on metal surfaces over time.

PB Blaster is a special blend of ingredients which helps to push through and break down the stuck-on residue of grime and rust that can accumulate on metal surfaces. The lubricant in PB Blaster also helps to reduce friction between surfaces, which can help make it easier to remove fasteners and corroded hardware.

It also provides a layer of protection against further corrosion and helps to keep metal surfaces in good condition for longer. Finally, PB Blaster is also a very effective lubricant for other components like hinges, latches and locks, helping to keep them running smoothly and making them much easier to open and close.

Is PB Blaster stronger than WD-40?

Comparisons between PB Blaster and WD-40 are sometimes difficult to make, as both are excellent lubricants that have different uses. While both products have similar ingredients, such as mineral oil and naphtha, the major difference is the additives.

WD-40 is a lighter oil and does not have the same degree of penetrating power as PB Blaster. Additionally, WD-40 is a water-displacing lubricant, meaning it is best used in wet conditions. On the other hand, PB Blaster is designed to penetrate rust and other forms of corrosion.

As a result, it is the best choice when trying to loosen stuck nuts and bolts. Ultimately, the best choice depends on the job, as each product excels in different applications.

Is PB Blaster silicone based?

No, PB Blaster is not a silicone-based product. PB Blaster is a line of aerosol penetrating oils, lubricants, and degreasers made and distributed by the Blaster Corporation. These products use a blend of surfactants, solvents, and additives that penetrate and loosen rusty parts, while also providing protection against corrosion and rust.

The company’s website states that PB Blaster is safe to use on any surface, including plastic, rubber, vinyl, and painted surfaces. PB Blaster also contains anti-flinging agents to help prevent overspray, enabling the user to work quickly and efficiently.

How long should you let PB Blaster sit?

It depends on the item you are trying to penetrate with PB Blaster. Generally, letting the formula sit for at least 5-10 minutes is recommended for optimal results. For items with heavy rust, like nuts and bolts that are very difficult to remove, you may need to leave the PB Blaster to penetrate a bit longer.

Some suggest applying the formula multiple times and leaving it to sit for 15-20 minutes each time. However, use caution when applying multiple applications of PB Blaster and check the item often to make sure corrosion isn’t getting worse.

If you apply too much PB Blaster, it can break down some of the metal components, leading to further damage.

Does PB Blaster damage plastic?

No, PB Blaster does not damage plastic. PB Blaster is a rust penetrant and lubricant specifically designed to help loosen corroded and rusted-on nuts and bolts without damaging or staining plastic or painted surfaces.

It is non-toxic and non-corrosive, which makes it safe to use on plastic. In addition, it is safe to use on rubber, flex lines and various types of metal. You can also use it on engines, tools, gears, outdoor equipment and more without damaging plastic materials.

When using PB Blaster, make sure to follow the instructions carefully and wear safety equipment to protect your eyes, face, and skin.

Will PB Blaster hurt rubber seals?

PB Blaster lubricant doesn’t contain any harsh chemicals, so it won’t harm rubber seals when used as directed. It can, however, cause some softening of older rubber seals, so it’s best to test it on a small area before applying it to all of the seals.

When using PB Blaster on rubber seals, it’s important to be gentle when applying it, since the force of the spray can cause the rubber to swell and be damaged. It’s also important to use a clean rag when wiping away excess lubricant, since any dirt or debris left behind could cause damage.

If any of the rubber seals start to show signs of wear or cracking, it’s best to replace them before applying any kind of lubricant, as PB Blaster won’t prevent further damage and may even accelerate the process.

When used with care, PB Blaster won’t hurt rubber seals when necessary, but it’s always best to exercise caution and refresh any seal that is getting worn or cracked.

What can I use instead of penetrating oil?

If you find yourself in need of something to help loosen a nut or bolt, but do not have access to penetrating oil, there are several other products and methods you may use as an alternative. If you happen to have WD-40 on hand, it can be a viable method of loosening rusted and stuck nuts and bolts.

Furthermore, you may use unconventional hacks such as soap, baking soda, vinegar, or even Coca-Cola if you are in a bind. The soap might be more effective than you think, as applying a lubricant like soap can help reduce the friction between the threads and make torque more effective.

Baking soda, when mixed with water, can be made into a paste and applied to the area, slowly over time it will eat away at the rust to weaken the grip of the bolt. Vinegar and Coca-Cola are also great options that have a fair amount of acid to help attack the rust.

You may also consider using a heat gun, or any other means of evenly heating the nut or bolt prior to attempting to remove it.

What can be used instead of WD40?

Protect, penetrate, or displace moisture on various surfaces. Most of these can be found in most local hardware stores or online.

Firstly, 3-in-1 oil is a petroleum-based oil that can be used for light lubrication. It is also useful to displace moisture from motors or to prevent rust or corrosion. Secondly, PB Blaster is a penetrating oil that loosens frozen or rusted parts and penetrates surfaces with a strong penetrating spray.

It works well in damp environments, and specializes in loosening frozen metals and nuts.

Thirdly, white lithium grease is a lubricant that can be used to protect against corrosion and to reduce friction. It also repels water, which makes it ideal for outdoor surfaces. Fourthly, ACF-50 is an anti-corrosive formula that can be used to protect metal surfaces from corrosion.

It also lubricates and penetrates surfaces and is ideal for those with electrical components.

Lastly, engine oil is a common and affordable alternative to WD40. It is good for general lubrication and can usually be found in any auto supply store. All of these alternatives are generally easier to find, affordable, and have their own specialized uses.

How long should I let penetrating oil sit?

The amount of time you should let penetrating oil sit depends on the type of penetrating oil you are using and the specific application you are using it for. Generally, it is recommended to let penetrating oil sit for at least 15 minutes.

If the penetrating oil has not made an impact after 15 minutes, let it sit longer. Some people let penetrating oil sit overnight, or even for several days, but you should avoid letting it sit for too long because it can gum up over time and become less effective.

It is important to note that some penetrating oils are designed to work in just a few minutes, so be sure to read up on the specific product you are using to know how long you should let it sit.

How long does it take for penetrating spray to work?

It depends on the type of penetrating spray that you are using. Generally, most penetrating sprays are designed to begin working within two to four minutes. However, some may require a longer amount of time depending on the severity of the corrosion and rust that needs to be dissolved.

For deeply embedded corrosion and rust, allow the penetrating spray to soak into the area for fifteen to thirty minutes for optimal results. It is important to wear safety glasses and gloves when using penetrating spray to ensure that you do not get any in your eyes or on your skin.

After the time frame for the specific penetrating spray and the area, use a scratch brush, an abrasive pad, or sandpaper to scrub away the loosened corrosion and rust. Rinse the area with water and allow it to dry before applying lubricant or further use.

Are PB Blaster fumes harmful?

PB Blaster fumes can be harmful if not used in a well-ventilated space. The propellant in the aerosol can and the chemical content, which includes petroleum distillates, naphtha and citrus terpenes, can cause irritation to the nose and throat, as well as headaches and dizziness when breathed constantly.

Prolonged exposure to PB Blaster can lead to more serious respiratory and pulmonary illnesses. Additionally, PB Blaster contains a petroleum distillate called xylene, which can be toxic when ingested and can cause potential irritations and burns when exposed to skin.

For this reason, it is important to ensure that the product is used in the proper environment, far away from the face and body, and with the adequate precautions taken. It is also important to use a face mask and protective clothing to reduce the risk of airborne particles and fumes.

Is PB Blaster safe on plastic and rubber?

Yes, PB Blaster is safe to use on both plastic and rubber parts. The PB Blaster formula is designed to effectively remove rust, corrosion, and other build-up without damaging nearby components. PB Blaster’s powerful, yet non-corrosive formula penetrates rust and break rust away from metal surfaces, which makes it safe for use on even the most delicate plastics and rubber.

Additionally, the formula uses high-performance ingredients like brake cleaner, which helps eliminate hard-to-remove soils, and Kwik-Lube, which is designed to lubricate and leave a protective layer after cleaning.

These additives help to ensure that the PB Blaster is gentle on plastic and rubber parts, while still providing the strength needed to remove rust and corrosion.