Yes, you can soak the Puffco Pro atomizer in isopropyl alcohol (IPA) to clean it. However, make sure you dry it thoroughly with a paper towel before reusing it. Additionally, if you have stuck on residue, you can use a cotton swab or soft-bristled brush to scrub off the residue.
For best results, you should clean your atomizer after every 10-20 uses. By properly caring for your atomizer, you will be able to keep it working well longer.
- Can I soak my Puffco plus atomizer in alcohol?
- Why does my coil taste burnt after 2 days?
- Can I boil my atomizer?
- How long do you boil a vape coil?
- How do you get the resin out of a Puffco?
- How do you disassemble a Puffco peak clean?
- How do you fix a Puffco that is not charging?
- Where can I get my Puffco fixed?
Can I soak my Puffco plus atomizer in alcohol?
No, you should not soak your Puffco Plus atomizer in alcohol. While some people may recommend doing this to help clean it, it can actually cause more damage in the long run. Alcohol can damage the materials used to make the atomizer, potentially compromising its functionality and leading to a shorter life for the atomizer.
Soaking it in water may be more beneficial to help remove stubborn residue. To clean your atomizer, you should use the Puffco cleaning cloth with isopropyl alcohol. After wiping down the atomizer, leave it to soak in distilled water for 5-10 minutes before drying it thoroughly with a paper towel.
For optimal results, it is also recommended that you rinse the atomizer out with hot water. This will help loosen any stubborn residue and make it easier to clean.
Why does my coil taste burnt after 2 days?
The most likely reason for why your coil tastes burnt after two days is a buildup of e-juice in the coil. Over time, e-juice will begin to break down and deteriorate, leaving behind a gummy residue that can affect the flavor of the vapor produced by your coil.
The residue can also cause the coil to degrade and heat unevenly, leading to a burnt taste. The best way to avoid this issue is to ensure that you clean your coil regularly, either by regularly replacing it or by using a cotton swab to clean away any buildup of gummy residue.
You should also try to use higher-VG juices, as they tend to produce less residue and tend to not break down as quickly as PG-heavy juices. Lastly, make sure that you’re allowing your coils enough time in between hits, as this will allow any residual heat from the coil to dissipate.
If you follow all of these steps, you should be able to greatly extend the life of your coil and help it stay tasting great for a longer period of time.
Can I boil my atomizer?
No, you should not boil your atomizer. Boiling your atomizer can cause irreparable damage to its internal workings and could lead to serious safety issues if burned badly or heated too high. Atomizers rely on electrical components to work properly, and boiling can cause those components to malfunction.
It can also damage the seals within the atomizer, causing them to leak or completely fail. Additionally, boiling can cause glass and plastic components to degrade or melt, posing a serious fire hazard.
If you wish to clean your atomizer, it is best to use 99% isopropyl alcohol and wiping it clean.
How long do you boil a vape coil?
You should generally boil a vape coil for approximately 10 minutes. This time can vary slightly depending on the type of coil you have and the wattage you’re using. Boiling a coil helps keep the wick and other parts of the coil clean, which reduces the chances of your device not working correctly.
To ensure you get the most out of your vape coil, it’s important to check your coil regularly and prevent any dirt or gunk build-up that can increase the risk of your coil not working properly. Additionally, it’s important to make sure you’re using the correct wattage for your device and type of coil so you don’t burn out your coil, as this could cause significantly reduce the lifespan of your coil.
How do you get the resin out of a Puffco?
To get the resin out of a Puffco, you need to place the atomizer into a shallow container filled with rubbing alcohol. Leave it to soak for at least an hour and then use a Q-tip to scrape the residue out.
Make sure to use tweezers or a sharp tool to remove any stuck-on pieces. You may also need to use a cotton swab to scrape off any hard to reach parts. Once the Puffco is fully cleaned, wipe down the atomizer with a paper towel before reassembling it.
How do you disassemble a Puffco peak clean?
Disassembling a Puffco Peak clean is easy and straightforward. To begin, you will need some cotton swabs and isopropyl alcohol.
Step 1: Make sure your Puffco Peak is cool and unplugged, then unscrew the base of the peak and carefully separate the atomizer and the battery component.
Step 2: Take off the ceramic bowl using a pair of tweezers, and remove all the excess material inside.
Step 3: Using a cotton swab, dab some isopropyl alcohol onto the swab and then swab down the surface of your atomizer and inside the bowl, where the oil is usually stored.
Step 4: To clean the air path, lightly dip a cotton swab in isopropyl alcohol and use it to swab the air path, then wipe the air path with a cloth.
Step 5: To finish the cleaning, rinse everything with warm water and air dry.
For more detailed cleaning instructions, you should refer to the Puffco Peak manual or contact their customer service team for help. Following these steps will help you keep your Puffco Peak clean and working properly.
How do you fix a Puffco that is not charging?
If your Puffco device is not charging properly, then you should try to troubleshoot the problem as soon as possible in order to ensure it remains functioning properly. To begin, make sure the battery is properly connected and then try a few charging methods in order to see if the issue resolves.
First, make sure your charger is plugged into the wall correctly and that the red light is on. You can then try plugging in the Puffco device directly into the wall, or plugging it into your laptop or other USB port.
Additionally, try unplugging the device from the charger and then plugging it back in again. This can sometimes work to reset the connection.
If these solutions do not fix the issue, then you may need to use a different charger, as the information being sent to the battery needs to match the charger you are using. After doing this and still experiencing issues, it is best to reach out to a qualified technician in order to diagnose the problem and find a solution.
Where can I get my Puffco fixed?
Puffco offers a 1 year limited warranty on their products, so you may be eligible for a free repair or replacement. If your product is still within the warranty period, you can submit a repair request here: https://support. puffco.
com/hc/en-us/requests/new and they will provide further instructions.
If your Puffco is not within the warranty period, you can visit an authorized Puffco retailer and have them service your device. You can find a list of authorized retailers here: https://puffco. com/pages/store-locator.
Alternatively, you can reach out to the Puffco Support team for guidance on how to repair your device. They can assist with finding replacement parts or provide technical support, depending on the nature of the problem you are experiencing.
You can contact their Support team here: https://support. puffco. com/hc/en-us/requests/new.