Skip to Content

Can you use Bissell CrossWave without cleaning solution?

Yes, you can use the Bissell CrossWave without cleaning solution, but it is not recommended. The cleaning solution helps to loosen dirt and grime from your floors, making for a more effective clean. Without the solution, you may find that you have to go over the same area several times to get all of the dirt up.

Cleaning solution also has sanitizing and deodorizing qualities that can leave your floors smelling and feeling fresher than without it.

Can you use a Bissell CrossWave as a normal vacuum?

No, the Bissell CrossWave is not a typical vacuum. It is a multi-surface cleaner that vacuums and washes surfaces simultaneously. The CrossWave has a cycle selector to choose from three customizable settings, including Vacuum & Wash, Vacuum & Dry, or Wash & Dry.

The Vacuum & Wash setting sweeps and washes at the same time, while the Vacuum & Dry setting picks up dry debris like pet hair, mud and dirt. The Wash & Dry setting is for sealed hard floors and can be used with carpet or area rugs.

The CrossWave does not feature a bagless design like many typical vacuums because its advanced cleaning technology uses multi-surface cleaning formulas to deep clean the floor. Additionally, the CrossWave comes with an ergonomic handle and convenient cord wrap system to make it easier to maneuver and store.

Does the Bissell CrossWave heat the water?

No, the Bissell CrossWave does not heat the water. It does use the power of multi-surface cleaning to simultaneously vacuum and wash your floors with both fresh and cleaning formula. The CrossWave uses the power of a motorized brush to loosen and remove debris, while simultaneously brushing and cleaning it away.

The power of the CrossWave is enhanced with the cleaning solution, so it is best to use an appropriate and recommended formula such as the Bissell Multi-Surface Formula. Using any other cleaning solution may cause damage to the CrossWave or leave streaks on your floors.

The CrossWave works with all sealed floors, including tile, laminate, area rugs, and hardwood, which must be pre-cleaned before use.

Should I vacuum before using CrossWave?

Yes, it is recommended that you vacuum the area you want to clean before using the CrossWave cleaning tool. This will ensure that the dirt and debris are loosened and lifted so it can be more effectively removed by the CrossWave.

Vacuuming also helps protect the bristles on the brushroll from becoming clogged and the air-driven cleaner from becoming overwhelmed with dust and debris. The vacuum also helps dissolve any potential mud or stuck-on dirt that the CrossWave might not be able to handle on its own.

Additionally, if you have any electrical or electronics closeby that you don’t want to get wet, vacuuming them first will also help protect them from any accidental water damage when cleaning with the CrossWave.

Why is my Bissell CrossWave leaving dirty streaks?

If your Bissell CrossWave is leaving dirty streaks, it may be due to a few different causes. First, it could be because the CrossWave was not used correctly. To get the best performance and cleanest results, you must use the CrossWave on a regular basis.

If the CrossWave is used irregularly it can cause dirt and debris to accumulate in the brushes and on the floor, resulting in streaks when cleaning.

Second, it could also be caused by a clogged or blocked filter. The filter should be checked and/or cleaned regularly. If it is not, debris can build up and be released back onto the floor, causing the streaks.

Finally, it could also be due to an incorrect or low solution setting. The CrossWave may not be releasing enough solution onto the floor. If this is the case, the floor will be left damp and the solution will dry, leaving streaks.

To prevent this, check that the solution setting is at the appropriate level and if needed, increase it.

How do I use my Bissell CrossWave?

Using your Bissell CrossWave is a relatively straight forward process. First, fill the water tank using cleaning solution or just water. Pour the water into the back reservoir on the left side of the vacuum.

Make sure the tank is securely fastened. Next, press the power button located at the top of the handle. Depending on your model, you may also have a selector switch to choose between Normal & Area Rug cleaning modes.

After choosing the appropriate mode, press the trigger on the handle to turn on the unit. Place the nozzle of the vacuum into the desired surface, using the SmartTouch Controls on the handle to adjust the brush or suction power.

When you are finished vacuuming, press the trigger again to turn the CrossWave off. Lastly, empty the dirt tank and rinse the filter with water. Be sure to let the filter air dry before reconnecting it to the vacuum.

Can Bissell CrossWave be used on hardwood floors?

Yes, the Bissell CrossWave can be used on hardwood floors. It is specially designed to clean all sealed hard surfaces, including sealed hardwood floors. The CrossWave is equipped with a Multi-Surface Brush Roll that is gentle on all side surfaces and will clean the dirt and debris without causing scratches or streaks.

It also has two-tank technology which separates clean and dirty water, providing a thorough and efficient clean on hardwood floors. Additionally, the vacuum features an Easy-Touch Digital Controls, allowing you to customize your cleaning based on the type of floor you are cleaning.

Can I just vacuum with the Bissell CrossWave?

Yes, you can certainly vacuum with the Bissell CrossWave alone. It is a multi-surface cleaner that features a dual-action brush roll to powerfully refresh both hard and soft surfaces at the same time, as well as a versatile cleaning tool for edges, corners and tight spaces.

It is designed with a multi-surface cleaning formula that is specifically formulated to be safe and effective on sealed hard floors and area rugs. Additionally, it comes with a mix of brushes and rollers to help break down and lift dirt, and a unique Multi-Surface brush roll specifically designed to clean both hard and soft surfaces simultaneously.

With the Bissell CrossWave you can easily and conveniently sweep, mop and vacuum all in one!.

Do you hold the trigger on Bissell CrossWave?

No, you do not need to hold the trigger on the Bissell CrossWave. Instead, the Bissell CrossWave has a unique, hands-free design that allows you to just press a button to turn on the vacuum and release it to turn it off.

You can also choose from low suction or high suction, depending on the floor type and the amount of suction that is needed. The CrossWave also has a smart touch control panel that allows you to easily switch between cleaning hard floors and area rugs with the same machine.

All you have to do is switch between settings and the machine will do the rest.

Can I put Fabuloso in my Bissell carpet cleaner?

No, you should not put Fabuloso in your Bissell carpet cleaner. Fabuloso is a floor cleaner that is often used to clean hard surfaces like tile and linoleum. It is formulated with ammonium laureth sulfate, which can create too much suds when combined with water and can leave a soapy residue on carpets.

Using Fabuloso in your Bissell carpet cleaner can damage the machine and may leave an unwanted residue when the carpet is dry. Instead, using a carpet cleaner formulated for the machine can provide better, longer lasting results for your carpets.

Can I use any cleaner in my Bissell?

No, it is not recommended to use any cleaner in your Bissell. The Bissell cleaning products are specially formulated to be used with the Bissell machines and brushes. Different machines may require different cleaning solutions, so it’s important to read the product packaging and follow the instructions for use.

Additionally, if you use the wrong cleaner, it could damage the plastic parts of your machine and/or leave behind a residue that could interfere with the cleaning process. For optimal performance, always use the cleaning solution sold specifically for Bissell machines, and consult the user manual for more details.

What household cleaner can I use in my carpet cleaner?

You can use a variety of household cleaners in your carpet cleaner. If you have a shop vac, you can use mild soapy water to tackle dirt and a mix of white vinegar and water to tackle odors. For carpet shampooers, you should always use the manufacturer’s specific cleaning solution to guarantee it is safe to use.

If you need something more powerful, there are general carpet cleaners such as Bissell’s stain and odor remover, carpet cleaner by Oxiclean, or pet-friendly carpet cleaners like Nature’s Miracle. Finally, for more serious stains and odors, you may want to consider a product with a more active cleaning solution like Resolve Pet Expert Spot and Stain Remover or Hoover Power Scrub Elite Pet Upright Carpet Cleaner.

Whatever cleaner you choose, make sure to carefully read and follow the manufacturer’s directions for the best cleaning results.

How do you use a BISSELL hard floor?

Using a BISSELL hard floor cleaner is easy and effective. First, make sure that the desired area is clear of debris, such as toys, furniture, and rugs. Then, use the handle to move the machine over the desired area, using a back-and-forth motion.

To clean in tight corners and crevices, use the provided crevice tool. To ensure that the best possible results are achieved, sweep, damp mop, and vacuum the floor prior to using the machine.

When you’re ready to begin cleaning, fill the tank with the desired solution and water mixture according to product instructions. You may want to shampoo carpets or apply specific cleaners for hardwood floors, such as BISSELL Wood Floor Cleaner.

Make sure to pay attention to any dosage or teeter details on the package. Be sure the power cord is plugged in and turned on before activating the cleaner.

If you’re using a steam cleaner, let it heat up for about 15 minutes, then press the handle steam release trigger and drag the machine over the surface. Keep the trigger pressed down as you clean to ensure the steam is continuously released onto the floor.

For regular hard floor cleaners, move the machine slowly over the floor, using a back-and-forth motion. The vacuum power will help to remove the dirt and water; it should be emptied periodically.

After the desired area is cleaned, unplug the machine and empty the tank. Wipe off all surfaces with a cloth. To ensure that all dirt and debris are removed, use a dry towel or mop to spot clean. Before putting away the machine, let it air dry completely.

Do you have to clean Bissell crosswave after every use?

Yes, it is recommended to clean the Bissell Crosswave after every use. To do this, first unplug the device and empty any remaining contents from the tank. Once the tank is emptied, rinse it out with warm water.

After rinsing the tank, use a damp cloth or a mild cleaning solution to wipe down the outside of the machine. Once the outer parts are clean, replace the tank and fill it with warm water and the cleaning solution that is specifically designed for the Bissell Crosswave.

Plug the machine back in and turn it on for two minutes to allow the solution to flush through the machine. Once finished, unplug the machine again and empty out any remaining tank contents. Finally, wipe down the exterior of the device and hang it to dry before storing.