Skip to Content

Diy Glitter Tumbler – Step By Step Instructions

How to Make a Glitter Tumbler – Step by Step Guide

To create a dazzling and one-of-a-kind tumbler, follow this straightforward step-by-step process. In just a few simple steps, you’ll be able to craft a glittering masterpiece that reflects your unique style and personality.

Step by Step Instructions

Step 1: Prep Your Tumbler

To kickstart your tumbler makeover, begin by roughening the surface using an 80 or 60 grit sanding block or band. This crucial step enables paint, glitter, and epoxy to bond effectively with the material. As you sand, you’ll notice visible marks appearing on the cup’s surface. Once complete, it’s essential to remove any residue left behind through a gentle cleaning process involving dish soap and water or rubbing alcohol. After rinsing, make sure the tumbler is thoroughly dry before moving forward in your creative endeavors.

Step 2: Apply Base Coat

When it comes to choosing the perfect paint color, consider pairing it with your glitter selection. This harmonious match can result in improved coverage, potentially requiring just one coat of glitter. To bring your design to life, start by applying a single layer of acrylic paint using a soft-bristled brush for a silky finish. Allow the paint to dry for approximately an hour before moving forward.

Step 3: Applying Glitter

To achieve a radiant, glittery finish on your tumbler, start by preparing an epoxy coating. Mix a small amount of epoxy and apply it to the surface in a thin, even layer. As soon as the epoxy touches the glass, sprinkle a generous amount of fine cut glitter evenly across the wet coating, making sure to cover every area thoroughly. Next, allow the epoxy to cure for approximately four hours to ensure a strong bond with the glitter.

Step 4: Applying Epoxy Coats

The initial layer of epoxy is applied over the sealer once it has fully dried, with just enough to provide adequate coverage without excessive drips or sags. This first coat requires at least four hours to cure, allowing it to harden sufficiently before proceeding. To further enhance durability and surface smoothness, a second epoxy application is necessary, which should be allowed to cure for an extended period of time, ideally overnight.

Step 5: Sanding and Preparing for Decals

To refine the surface texture of your tumbler, begin by giving it a light sanding session, concentrating on the rim and base areas where roughness may be most pronounced. This step helps to eliminate any imperfections that could interfere with the overall appearance. Following this, thoroughly wash and dry the tumbler to eradicate any residual dust or debris that may have accumulated during the sanding process, ensuring a pristine finish.

Step 6: Applying Decals

When it comes to customizing tumblers with decals, the process begins with selecting and cutting out the design. To give your design an elevated look, consider incorporating an offset – a background layer that adds depth and dimensionality to the main decal. This subtle touch can make all the difference in creating a visually appealing final product.

Once you’ve chosen and cut out your decal, it’s time to apply it to the tumbler. To ensure a smooth and successful application, start by applying the offset layer first – if you’re using one – followed by the main decal layer. Take your time and be patient, as the key to a great-looking finish is in the attention to detail.

Step 7: Final Epoxy Coats

To preserve the decal’s integrity, apply a thin layer of polycrylic over the entire tumbler, inclusive of the decal itself. This safeguard against lifting and bubbles, ensuring a smooth finish. Following the sealer’s dryness, apply one to two additional coats of epoxy, each coat meticulously smoothed out to eliminate any imperfections. Allow the tumbler to cure according to the recommended guidelines, allowing the final layers to fully solidify.

Step 8: Finishing Touches

When preparing your tumbler for use or shipment, there are a few crucial steps to ensure its optimal performance and longevity. To start, carefully remove any excess epoxy around the rim using a craft knife. Next, thoroughly wash the tumbler with mild soap and water to eliminate any impurities. It’s essential to get it spotless before moving on to the next stage. Finally, allow the epoxy to fully cure according to the manufacturer’s guidelines before putting your tumbler into service or shipping it out.

Video Tutorial

If you’re looking for a more interactive approach to making a glitter tumbler, I recommend watching this YouTube video tutorial alongside this written guide. The visual step-by-step instructions in the video will complement the techniques discussed here, providing an engaging and easy-to-follow learning experience. By combining both formats, you’ll gain the skills and confidence to create a stunning and long-lasting glitter tumbler that you can be proud of. Start crafting with enthusiasm!

Discover 25 Stunning DIY Glitter Tumbler Ideas to Add Sparkle to Your Drinkware Collection

Rainbow Glitter Tumblers with Cricut

image source

If you’re looking to add some sparkle to your drinkware collection, why not try making your own glitter tumblers? Not only will this save you money by avoiding store-bought options, but it’s also a fun and creative way to express yourself. Even if you’re new to using a Cricut machine, don’t worry – following these simple DIY steps will have you creating a unique and magical masterpiece in no time. As a bonus, your handcrafted glitter tumbler makes for an excellent gift option for friends and loved ones. To get started, gather the necessary materials: an insulated wine tumbler, painter’s tape, spray paint in various rainbow colors, glitter, resin, a Cricut Explore machine, transfer tape, premium vinyl, and a weeding tool. With these supplies and a little bit of imagination, you’ll be sipping your favorite beverages from a one-of-a-kind, dazzlingly decorated tumbler in no time.

Personalized Resin Glitter Tumblers

image source

Create stunning personalized glitter tumblers with ease by following this DIY guide. Whether you’re a seasoned crafter or new to the scene, this project is perfect for adding a pop of color to your table setting. To get started, gather your supplies: stainless steel tumbler, clear cast resin, wooden popsicle sticks, powdered Mica, heat gun, sandpaper, Isopropyl alcohol, and paper towels. Before pouring in the resin, make sure to thoroughly clean the tumbler to ensure a smooth application. With these simple steps and materials, you’ll be on your way to creating beautiful, one-of-a-kind tumblers that are sure to impress.

DIY Glitter Tumblers with Epoxy

image source

If you’re familiar with epoxy resin basics, you can apply that knowledge to create a vibrant and captivating glitter tumbler. Even for those who are new to DIY endeavors, this project is achievable by following step-by-step instructions accompanied by illustrations. The essential materials required include a stainless-steel tumbler, paint spray, painter’s tape, Mod Podge, silicone brushes, fine glitter, clear coat spray, epoxy, popsicle sticks, gloves, and measuring cups. For optimal results, it’s recommended to prime the tumbler with paint before applying the glitter evenly.

DIY Glitter Tumblers for Beginners

image source

For those just starting their DIY journey or looking to add some creative flair to their art collection, this colorful tumbler project is an excellent way to spend a fun-filled afternoon. Whether you’re a novice or a seasoned pro, the process of transforming a stainless steel tumbler into a sparkling masterpiece is both easy and rewarding. To get started, gather your essential supplies: a stainless steel tumbler, rubbing alcohol, paper towels, foam brushes, fine glitter, epoxy resin, plastic cups, popsicle sticks, PVC pipe, a cardboard box, and pool noodles. With these materials at the ready, you’ll be well on your way to creating a unique and eye-catching addition to your collection.

Glitter Resin Tumbler with Cricut Vinyl

image source

Elevate your crafting game by creating a stunning tumbler using your Cricut skills. With minimal expertise required, you can follow these easy steps to bring this project to life. To get started, gather the necessary materials: a tumbler, glitter, high-gloss finish, Mod Podge, Chrome vinyl, a Cricut machine, blue painter’s tape, rubbing alcohol, sandpaper, and a cup turner. Use the blue painter’s tape to cover the top and bottom edges of the tumbler before applying paint. As you work on this project, remember that the key to success lies in attention to detail and patience. With these elements combined, you’ll be able to create a truly unique and eye-catching tumbler that showcases your Cricut skills.

Making Glitter Tumblers Without a Cricut

image source

While it’s not necessary to own a Cricut machine or possess advanced crafting skills to create a stunning glitter tumbler, there are still numerous ways to customize one without this specialized tool. This DIY project is perfect for those looking to personalize their tumblers and make them truly unique. To achieve the desired result, simply follow each step carefully. If you’ve decided to embark on this creative journey, gather your supplies, including a tumbler, various glitters, paint sprays, epoxy resin, masking tape, measuring cups, and stirring sticks. With these basic materials and some careful planning, you can create an eye-catching tumbler that reflects your personal style.

How to Make Epoxy Glitter Tumbler

image source

To transform a plain tumbler into a stunning work of art, follow this easy DIY plan. Whether you’re a novice DIY enthusiast or an experienced one, this step-by-step guide is designed to help you achieve professional-looking results without any hassle. With the right materials at your disposal, including a stainless-steel tumbler, paint sprays of your preferred color palette, painter’s tape, glitters, epoxy, measuring cups, sticks, sandpaper, cup turner, paper plate, and mini SVG bundle from lovesvg, you’ll be well on your way to creating a masterpiece that will elevate the look of your simple tumbler. Just remember to take your time and follow each step carefully to ensure a flawless finish.

Ultimate DIY Glitter Tumbler

image source

Gift the perfect token of friendship on Friendship Day by creating a one-of-a-kind DIY glitter tumbler that can be tailored to suit any personality. Not only is this project ideal for special occasions, but it’s also an excellent way to breathe new life into your daily routine by replacing a traditional and mundane tumbler with a vibrant and eye-catching masterpiece. The best part? This endeavour requires minimal expertise, making it accessible even to beginner DIY enthusiasts. To get started, gather the essential items: epoxy, stainless steel tumbler, colorful paint sprays of your choice, cups, stirring sticks, spray paint, mod podge, vinyl decals, dry sandpaper, painter’s tape, and electric tape. With these simple supplies, you’ll be well on your way to crafting a unique and thoughtful gift that’s sure to bring a smile to the recipient’s face.

Cool Omber Glitter Tumbler Design

image source

If you’re looking for a minimalist and timeless tumbler design, this DIY project featuring an ombre glitter tumbler is an excellent starting point. One of its greatest advantages is that it allows you to put your own creative spin on things by customizing the design yourself, rather than settling for something pre-made in stores. This project is a fantastic addition to any tumbler crafting endeavor. To get started, gather the necessary materials: a stainless steel tumbler, clear cast resin, measuring cups, stirring sticks, resin, glitters, ombre paint spray, painter’s tape, sandpaper, and a paper towel. From there, you can choose to create an ombre effect with a single color or multiple tones, depending on your personal preference.

Beach-Themed Glitter Stripes Tumbler

image source

If you’re a fan of incorporating beach-inspired elements into your home decor, you’ll surely appreciate having this glitter stripes tumbler as part of your collection. Not only is it a great addition to your kitchen, but it also makes for a thoughtful gift for friends and loved ones. To create this personalized masterpiece, you’ll need a stainless-steel tumbler, glitters, epoxy resin, Cricut vinyl decals, painter’s tape, colorful paint sprays, transfer tape, a cutting mat, paper towel, and sandpaper. With these materials, you can turn a ordinary tumbler into an extraordinary piece that will bring a touch of the beach to any room.

Cute Glittered Acrylic Tumbler

image source

Get ready to unleash your creativity and create a one-of-a-kind glittered acrylic tumbler that’s perfect for sizzling summer days! Not only will you have a blast crafting it yourself, but you can also personalize it as a thoughtful gift for friends, family members, or kids. To bring this DIY project to life, gather the following essentials: a plastic glass tumbler, pink paint spray (or choose your favorite base color), vinyl decals, clear cast resin, cup turner, painter’s tape, sandpaper, paper towel, measuring cups, and stirring sticks. With these materials at your fingertips, you’re ready to transform a plain tumbler into a sparkling masterpiece that’s sure to impress.

Unique DIY Epoxy Tumbler Cup

image source

When it comes to designing tumblers, creativity knows no bounds. But not all designs are equally captivating. This DIY guide is perfect for those seeking a one-of-a-kind, visually striking tumbler idea. By following the step-by-step instructions and guidelines outlined below, you’ll learn how to create a completely unique and adorable tumbler that reflects your personal style. To get started, gather the necessary supplies: a blank steel tumbler, epoxy resin, painter’s tape, measuring cup, cup spinner, desired glitters, vinyl decals of your choice, wood craft stick, fine sandpaper, and a heat gun. With these materials at hand, you’re ready to unleash your creativity and bring your vision to life.

DIY Unicorn Glitter Tumbler

image source

If you have a friend who’s a unicorn enthusiast, consider crafting an adorable unicorn-themed glitter tumbler to show off your creativity. The best part? This DIY project is perfect for beginners! With just a few simple materials like an empty tumbler with a straw, mod podge, white spray paint, painter’s tape, fine glitters, epoxy resin, measuring cups, stirring sticks, a double-sided adhesive sheet, and a cutting mat, you can create this stunning piece. Simply follow the easy steps to get started and unleash your inner crafter.

Snow Globe Glitter Tumbler

image source

A snow globe glittered tumbler makes a thoughtful gift for teenage girls, but its appeal extends beyond that demographic. With some creativity and the right materials, anyone can create this unique accessory according to their interests and love for tumblers. This project serves as an opportunity to innovate and add something new to your tumbler craft. To bring it to life, you’ll need a double-walled skinny tumbler, glitters, epoxy resin, a mixing cup, drill bits, vinyl, transfer tape, an SVG file, a cutting mat, and a weeding tool. For those unfamiliar with Cricut, using vinyl decals can simplify the process. With these materials at your disposal, you’re ready to unleash your creativity and craft a one-of-a-kind snow globe glittered tumbler.

Dishwasher Safe Modge Podge Glitter Tumbler

image source

Make a dishwasher-safe Mod Podge glittered tumbler without breaking the bank with this straightforward DIY guide. Even if you’re not a DIY enthusiast or a novice crafter, you can still successfully complete this project by following these easy steps and guidelines. This customized tumbler will be a great addition to your summer accessories, especially when heading out. To get started, you’ll need a coffee tumbler, dishwasher-safe Mod Podge, fine glitter, paintbrushes, painter’s tape, and a wet cloth. The best part is that this Mod Podge can also be used on other tumbler surfaces, such as stainless steel, for similar results.

DIY Glitter Tumblers with Vinyl Decal

image source

Create adorable and charming glittered tumblers with vinyl decals using this DIY guide. If you’re not familiar with the Cricut machine, vinyl decals are a fantastic alternative that can be completed quickly and effortlessly. To get started, gather the necessary materials: a stainless-steel tumbler, spray paint for the base coat, epoxy resin, fine glitters, spray sealer, electrical tape, isopropyl alcohol, a cup spinner, and fine grit sandpaper. With these simple steps and guidelines, you’ll be able to personalize your tumbler in no time.

Ombre Glittery Iced Tea Tumblers

image source

Transforming plain iced-tea tumblers into unique and stylish masterpieces is a breeze with this DIY project! With just a few simple materials, including ombre paint sprays, painter’s tape, glitters, sandpaper, rubbing alcohol cup turner, epoxy resin, measuring cups, and stirring sticks, you can give your iced-coffee tumblers a fresh new look that will add a touch of personality to your coffee table. Whether you’re a DIY novice or an experienced crafter, this project is easy enough for anyone to complete in no time. And the best part? The results are totally worth it – you’ll be sipping from a one-of-a-kind cup that’s sure to spark conversations and make your friends jealous. So why wait? Grab those materials and get creative! You can create super-cool tumblers that will be the envy of all your coffee-loving pals, and they’re perfect for sipping on during those hot summer days.

Homemade Floating Glitter Tumbler

image source

If you’re a sucker for all things cute, a floating glittered tumbler for water or iced coffee is sure to win your heart. While it may be challenging to find one in stores, as most retailers don’t carry customized tumblers, the good news is that you can create your own with this DIY plan. The best part? You won’t need to invest a lot of time and effort into making it. By following simple step-by-step instructions and guidelines, you can craft your very own tumbler. To get started, you’ll only need a few basic supplies: a clear photo tumbler, glitters, sequins of your choice, and water.

How to Decorate Tumbler with Glitter and Resin

image source

Are you ready to breathe new life into a plain tumblers? With this DIY guide, you can transform them into vibrant masterpieces that reflect your personal style. Not only will this project elevate your favorite drinkware, but it’s also an opportunity to create unique pieces for sale or as decorative items in your home. To get started, gather the following materials: stainless steel tumbler, clear dying white glue, foam brushes, fine glitters, painter’s tape, food safety epoxy resin, measuring cups and stirring sticks. Before you begin, be sure to thoroughly clean the tumblers to ensure a smooth paint job. With these simple steps and a dash of creativity, you’ll have beautifully customized tumbler in no time.

Neon Rainbow Milky Way Glitter Tumbler

Get creative with neon colors and bring home a stunning rainbow milk way glitter tumbler by making it yourself. Don’t worry if you’re not an artist – just follow our simple steps and watch a video tutorial to get started. Before you begin, make sure you have all the necessary materials: a stainless-steel tumbler, neon paint sprays, painter’s tape, cup spinner, epoxy resin, fine glitters, measuring cups, stirring sticks, and gloves. Once you’ve gathered everything, you’ll be ready to unleash your inner creativity and produce a masterpiece like a pro.

Snow Globe Glitter Acrylic Tumbler

image source

For those who don’t consider themselves crafty, painting tumblers can be a fun and creative outlet. If you’re looking to add a unique customized tumbler to your collection, the snow globe acrylic glitter tumbler is an excellent choice. While it may seem intimidating at first, with the right materials and some patience, anyone can bring this idea to life. To get started, you’ll need a clear tumbler as the base, epoxy resin for added depth and texture, fine glitters in your desired colors, sequins of your choice to add extra visual interest, painter’s tape to create clean lines, paint spray for a base coat of your preferred color, rubbing alcohol to smooth out any imperfections, and a cup spinner and measuring cups with stirring sticks to make the process more manageable. With these materials at hand, you’ll be well on your way to creating a one-of-a-kind tumbler that reflects your personal style.

DIY Glitter Ombre Tumbler

Get ready to create a mesmerizing Ombre glitter tumbler with our step-by-step DIY guide! To make this project even more accessible, we’ve included a video tutorial that breaks down the process into easy-to-follow steps. This plan is perfect for novice tumbler crafters who want to achieve professional-looking results without feeling overwhelmed. All you need to do is follow along with the video and replicate the design in an exact pattern. To complete this project, gather your materials: a clear tumbler, ombre paint spray for the base coat, fine glitters, epoxy resin, painter’s tape, rubbing alcohol, a paper towel, vinyl decals, and a cup turner.

Halloween Glitter Globe Tumblers

This Halloween season, why not treat your kids to an unforgettable craft experience? One such activity that’s sure to delight is creating a mesmerizing Halloween glitter globe tumbler. And the best part? You can make it in just a few minutes with minimal steps! Simply follow our easy-to-follow video tutorial and you’ll be well on your way to crafting this stunning piece. Plus, consider gifting it to your trick-or-treaters as a spooky welcome gift. To get started, gather the following materials: a clear tumbler with straw, painter’s tape, fine glitters of your choice, vinyl decals, paint spray, rubbing alcohol, mod podge, and a foam brush. With these simple ingredients, you’ll be crafting in no time!

Watermelon Floating Glitter Tumbler

For parents looking to create a fun and motivating back-to-school experience for their kids, this DIY watermelon floating glitter tumbler project is an excellent consideration. By crafting these tumblers themselves, parents can add a touch of excitement to the school year. And the best part? It’s completely budget-friendly! With just a few simple craft supplies, including a clear tumbler, paint spray for the base coat, fine glitters, watermelon-themed sequins, epoxy resin, measuring cups, stirring sticks, painter’s tape, sandpaper, and a cup turner, parents can create these unique tumblers in no time.

DIY Starbucks Glitter Tumbler

Transforming your Starbucks tumbler into a one-of-a-kind masterpiece is now easier than ever with this straightforward video tutorial. In just a few simple steps, you’ll be able to give your tumbler a customized and charming makeover that’s sure to impress. If you’re an enthusiast of tumbler crafting, you won’t want to miss this opportunity to take your skills to the next level. To get started, you’ll need a Starbucks tumbler as the foundation, along with epoxy resin, fine glitters, mini sequins of your choice, painter’s tape, a paper towel, and sandpaper. Feel free to add an extra layer of personalization by painting or spraying the tumbler base color to create a unique hue that reflects your style.


Crafting a DIY glitter tumbler is an exciting project that allows you to showcase your personal style. With the right materials and a dash of creativity, you can customize your tumbler to reflect your unique flair. Whether it’s for yourself or as a thoughtful gift, these personalized tumblers are sure to delight. So, gather your supplies and get started on making your own dazzling tumbler – a fun and rewarding experience that’s perfect for any occasion.