Skip to Content

How can I get my Mixtiles to stick again?

If your Mixtiles are not sticking properly, there are a few simple things you can do to try and get them to stick again.

First, you should wipe the adhesive off of the Mixtiles with a damp cloth. This will remove any dust or dirt that may be preventing the tile from sticking properly.

Once you have wiped them clean, you will want to apply a new layer of adhesive to the back of the tile. Double-sided adhesive tape or sticky dots are great for this.

Once the adhesive is applied, firmly press the tile in the desired location. If you want to add extra adhesive, you can use a glue gun or adhesive spray. This may create extra holding power, but use caution as too much adhesive can damage the surface you are sticking to.

Finally, let the adhesive cure for a day or two before hanging your Mixtiles. This will allow the adhesive to fully cure and create a stronger bond.

By following these steps, your Mixtiles should be sticking again in no time.

How many times can you Restick Mixtiles?

You can restick Mixtiles as many times as you want, as long as you use a clean cloth or microfiber. We recommend re-sticking your tiles as often as you feel like it to keep them looking their best. Whenever you move Mixtiles, be sure to remove them carefully from the wall, using a clean cloth or microfiber, to avoid damaging the walls or tiles.

By using a clean cloth or microfiber with gentle pressure on the corners, you can easily remove the tiles from the wall without leaving any marks or sticky residue. Once you have removed the tile, allow any dust or debris to settle before wiping the surface clean with a microfiber cloth and re-sticking the Mixtiles back in place.

Are Mixtiles reusable?

Yes, Mixtiles are reusable! Although they are designed to be a permanent wall decoration, you can create a completely new look whenever you’d like by simply peel and stick. Because of their removable mounting adhesive, you can reposition or swap out Mixtiles whenever you’d like, allowing you to perfectly match any decor theme or style.

And, since Mixtiles are lightweight, easy to install, and don’t require any nails, you can move them around with ease to create a new look whenever you feel inspired.

Can you hang Mixtiles in the bathroom?

No, we don’t recommend hanging Mixtiles in the bathroom due to the excessive moisture in the environment. Mixtiles would not survive in a steamy, wet atmosphere and may warp or suffer other damage due to being exposed to the water or humidity.

Mixtiles are designed for inside walls so if you’re looking for splash proof artwork for the bathroom, we suggest looking at specific bathroom decor pieces that you can find in stores.

Is there something better than Mixtiles?

Yes, there are other photo printing options out there besides Mixtiles. From classic framed prints to modern acrylic prints to custom photo books and beyond, you have lots of options to choose from.

If you’re looking for an affordable and modern way to display your photos, you might consider ordering canvas prints. With canvas prints, you can choose from a variety of sizes and finishes and the prints can be framed or hung directly on the wall.

For those who want to create something unique, photo books are a great option. You can create text, add captions, and construct your own custom layout for a photo book filled with all of your favorite pictures.

Many photo book companies also give you the option to use custom templates and add background music for a truly unique creation.

If you’re looking for something traditional, framed prints are a great choice. Most photo companies offer a wide range of frames and mounting options, such as hanging clips and wall mounting, so you can choose the look that’s best for your space.

No matter which type of photo printing you prefer, it’s easy to find something better than Mixtiles. With so many creative and cost-effective options, you can find the perfect way to display your photos.

Can you replace pictures in Mixtiles?

Yes, you can replace pictures in Mixtiles. After you order Mixtiles, you can replace the pictures you already have with new ones by signing up for Mixtiles. Once you sign up, you will be able to create your personal cube, which allows you to design and order a set of Mixtiles with your pictures.

You can print your pictures with Mixtiles directly from your Instagram, Cloud services or Camera Roll. Once you have selected the pictures you want to add, you can edit, remove or replace the pictures you initially added.

With the help of the Mixtiles App, you can easily add and replace pictures in your Mixtiles cube.

How far apart should Mixtiles be?

Mixtiles should be spaced apart at least two inches between each tile. This provides enough room to make sure the tiles are properly and evenly spaced. When spacing the tiles, make sure there is enough distance to accommodate the adhesive, which is commonly 5/16” or 3/8” of an inch wide, on the back of each tile.

Additionally, it’s important to provide enough space between tiles so the final design can be properly seen and appreciated. As a general rule of thumb, one extra inch of space should be left between tiles.

Finally, it’s important to consider the size of the tile and the desired overall look when deciding how far apart to space out Mixtiles.

How do you hang a Mixpix on the wall?

Hanging a Mixpix on the wall is easy and can be done with a few common household items. First, make sure you have the correct mounting hardware for your Mixpix, which should come with the item. Next, you will need a hammer, a set of nails, a level and a tape measure.

Start by measuring the wall to decide the perfect spot for your Mixpix. Make sure the spot is level by using a level. Once the place is decided, use a nail to mark the wall where the top right corner of the Mixpix should be placed.

Then, place the mounting hardware on the back of your Mixpix over the marked spot and use the nails included to secure it onto the wall. Finally, using a hammer, firmly drive the mounting hardware into the wall.

Check that everything is level one more time and you are done. Your Mixpix should now be hanging securely on the wall!.

What is similar to Mixtiles?

Mixtiles is an innovative photo-hanging kit that allows people to easily change and rearrange the decor in their living spaces. It is a product of Photowall, a Swedish imaging technology company, and is especially popular among millennial and Gen Z households.

There are a variety of products similar to Mixtiles that offer similar benefits. These include Mina Gallery, Click and Hang’s magnetic prints, Posterjack’s wall decals, and Posterlounge’s posters. All of these products are highly customizable and allow people to display their favorite photos and artwork in their homes in unique and creative ways.

They also have the benefit of being able to be easily rearranged and changed as tastes and styles evolve over time. Additionally, the products are all great options for people looking to add a unique and personalized touch to their living spaces without the need for too much effort, time, or money.

How do Mixtiles attach to the wall?

Mixtiles come with a patented and easy-to-use adhesive system specifically designed for your walls. To install, simply peel the adhesive backing off the Mixtiles and press them firmly against a smooth, clean surface.

Mixtiles are designed to firmly stick to most surfaces such as painted drywall, wallpaper, glass, and wood without needing any nails, screws, drilling, or mess. For best results, it is recommended to allow the adhesive to stick for 24 hours before hanging anything on it, such as a picture or a piece of artwork.

Additionally, it is important to note that Mixtiles are only for indoor use, and are not recommended for outdoor use. To remove, Mixtiles can be peeled away from the wall without leaving any visible damage.

How do you hang picture tiles?

Hanging picture tiles is a relatively easy and straightforward process that requires minimal tools and heavy lifting. To hang your picture tiles, you will need a couple of supplies: picture tile hanging hooks and nails, a ruler or level, a hammer, and a ladder (or a step stool) to reach higher positions.

Once you have all your supplies ready, you can begin quickly and easily. First, measure the wall space where you want to hang the tiles, then find the center. Mark the center of the wall with a pencil.

This is where you will hang the first tile, making sure it is level with the wall.

Next, place two picture tile hooks on the bottom edge of the tile, on both the left and the right. Make sure the edges of the tile are straight and the hooks are equal in height.

Secure the hooks to the wall with your nails and hammer, then hang the tile using the hooks. Once the first tile is up, you can hang your other tiles following the same steps. Measure and mark the wall to ensure each tile is spaced correctly and is level with the first tile.

Once all the tiles are hung, step back and admire your work!.

How do you hang things on tile without drilling?

One easy way to hang things on tile without drilling is to use adhesive hooks. These hooks use strong adhesive to stick to the tile surface and can easily support lightweight items such as keys and wallets.

If you’re looking to hang heavier items such as mirrors or shelves, look for adhesive hooks that are specifically designed to support a higher weight capacity. Additionally, there are tile anchors available that use two-sided adhesive and and a toggle bolt.

These anchors provide a stronger hold, so they can be used with heavier items. Lastly, you can use a picture hanging rail, which works by affixing two hooks to the tile and then hanging the picture or shelf from the hooks.

This rail can support items up to 20 lbs.

How do you stick photos on a wall?

Sticking photos onto walls usually requires three easily available items: double-sided adhesive tape, a pencil, and a ruler.

First, determine the exact location on the wall where you want to hang the photo, and use the pencil and ruler to lightly mark the spot. Peel off a small piece of adhesive tape – often being careful not to touch it with your bare hands, as fingerprints can get stuck onto the sticky side – and stick it onto the photo in a place where it won’t be visible.

To make a strong hold, press firmly on the adhesive so it sticks to the photo.

Next, measure the distance between the three adhesive tape spots and use a ruler to make the same distance between the three pencil spots that were made earlier on the wall. This ensures that the photo will be hang evenly.

Position the photo onto the wall so that the adhesive tape sticks to the wall, making sure that no air bubbles are created in the process.

Finally, press firmly against the photo and ensure that the photo lies flat onto the wall. This ensures that the adhesive works, either using Blu Tack, glue dots, poster strips, or any other type of adhesive, and makes sure the photo will stay securely in place.

How do you hang ceramic tile in a frame?

Hanging ceramic tiles in a frame is relatively easy and makes an attractive and personalized decoration to any room. Start by measuring the frame, and then cut the ceramic tile to fit the frame. You can use a utility knife, metal snips, or a wet saw to make precise cuts in the tile.

Once the tile is the right size, use a tile adhesive or mastic to attach the tile to the frame and allow the adhesive to dry according to the manufacturer’s instructions. When the adhesive is completely dry, use a sealant or grout to fill in any plugholes between the tile and the frame.

Depending on the tile, you may need to spread the grout in multiple coats. Once the grout is completely dry, you can use a piece of felt or thin foam to attach the tile to the frame. Finally, hang the frame to the wall and enjoy your decorative ceramic tile art!.

Do Command Strips work on ceramic tile?

Yes, Command Strips can work on ceramic tile, as long as the tile is clean, dry, and smooth. You can hang up to 3 pounds of weight on ceramic tile with Command Strips, as long as the tile is unglazed, non-porous, and has been thoroughly cleaned and dried.

Be sure to follow the instructions on the package. It is important to wait at least an hour after installation before putting any items in the strips to make sure they are secure. If the strips are being used on a bathroom tile, it is best to wait 72 hours to clean the tile and let the adhesive set.

Additionally, you should never hang any pictures over 5 pounds with Command Strips on a ceramic tile wall.

What to do with Mixtiles when you move?

If you’ve recently moved or are planning to move, there are a few things you can do with your Mixtiles. First, you can take them down and store them for when you move into your new home. This will ensure that your Mixtiles remain safe and undamaged throughout the move, and you won’t have to worry about them becoming dislodged or damaged during transport.

Alternatively, if the wall you were displaying your Mixtiles on is coming with you, you can simply use the removal no-residue stickers provided with your Mixtiles kit and re-apply them to the same wall in your new home.

Finally, if neither of these options work for you, you can always order a new Mixtiles kit specifically for your new home as a fun way to decorate your new space.