Adjusting the width of your blinds depends on the type of blinds you have. For Venetian blinds or mini blinds, you will need to adjust the ladder cords. Unhook the ladder cord on both ends of the blind and move them up or down or to the side in order to adjust the width.
If you have pleated or cellular blinds, you will need to adjust the side rails. On either side of the blinds, there will be cords that you can raise or lower to alter the width. Finally, if you have roller blinds, you will need to adjust the tension cord.
Locate the cord lock on the bottom rail and move the cord along to make the blinds wider or narrower. The cords can be a little tricky to adjust and manipulating them may take some practice as different blind types can require different techniques.
Should blinds be the exact width of the window?
No, blinds do not have to be the exact width of the window. Blinds generally come in standard sizes, but you can order custom-made blinds that can fit any window size. The easiest way to determine the size of blinds for any window is to measure the width of the window and then subtract about 1/4 inch from that measurement to give some room for adjustment.
Additionally, if you want your blinds to cover the entire window, you need to measure from the left side of the window’s frame to the right side and then add 3-4 inches to each side, depending on the type of blinds you purchase.
Ultimately, the decision on whether to get exact size blinds or custom-made blinds for the window depends on personal preference and budget.
How do you extend window blinds?
Extending window blinds is a relatively simple process. First, you will need to determine the type of blinds you have, as they come in a variety of sizes and materials. Most blinds have a pull cord located at the bottom of the blinds, with a plastic wand at the end.
You can use the wand to extend the blinds, as well as rotate the slats to adjust the amount of light entering your room.
Before extending the blinds, you will also want to ensure that they are properly cleaned and lubricated. If they are not, they may be harder to extend (or not extend at all). You should also be sure to check for any obstructions or possible snags before beginning the process.
Once the blinds are clean and lubricated, you can begin extending them. Pull the cord to the desired length, ensuring that the wand does not get stuck along the way. If the wand does get stuck, gently move it up and down until it is free.
Once the blinds are extended, you can use the plastic wand to rotate the slats. Then, you are all set!.
Can you get blinds resized?
Yes, it is possible to get blinds resized. Depending on the type of blind you have, the process of resizing may be different. For most blinds, you can take them off of their mounting bracket and then either remove or add a few slats to make them the right size.
For custom blinds, you may need to either work with the blinds manufacturer or a professional to resize them to your desired size. Additionally, many window treatments companies will offer resizing services or recommend local professionals who can do this for you.
Can blinds be altered?
Yes, blinds can be altered. The size, color, texture, and material of a blind can be changed to best suit your needs and the décor of your home. When purchasing blinds, you have the option of ordering custom-sized blinds to exactly fit your windows.
Moreover, blinds come in a variety of colors and finishes, including white, tan, wood and aluminum. Depending on the material, you may be able to adjust the length of the blind, though typically the width is non-adjustable.
Lastly, you can often add a specialty lining to your blind that adds insulation and light control, as well as helps protect your furniture from the sun’s rays.
Will Home Depot cut blinds to size?
Yes, Home Depot typically offers services to cut blinds to size. Some Home Depot stores have a cutting service available onsite, where customers can purchase a new blind and have it cut to their desired size before taking it home.
Other stores may simply offer a custom blinds installation service, where customers can purchase a new blind and bring in their measurements to the store, and a team member will cut and install the blinds to size.
If the store does not offer a cutting service, customers can contact their local store to find out if there is a third-party service available that can provide this service.
Can you alter the width of Venetian blinds?
Yes, you can alter the width of Venetian blinds, although doing so requires taking the blinds off the window and then adjusting them. The slats on Venetian blinds are connected to an adjustable rod at the top, which can stretch or shrink the gap between them.
Depending on the type of Venetian blinds you have, you may be able to adjust them without completely removing them from the window frame. However, it is usually best to entirely remove the blinds in order to prevent any damage to the window or blinds.
If you can’t adjust the rod with your hands, you will need a screwdriver to remove the screws at its ends and extend or shorten it. Once you have adjusted the rod, you should measure the area of the window to check if it matches the blinds’ width.
If it doesn’t, you should adjust the rod further until your blinds fit the window frame properly. After you have adjusted the width, you can then reattach your Venetian blinds to the window frame.
How much smaller should blinds be than the window?
Blinds should generally be 2 to 3 inches shorter than the window, depending on the size of the window and the size of the blinds. For small windows up to 36″ wide, a 1 inch gap is appropriate, while medium windows 36″ to 48″ can have a 1 1/2 inch gap.
For larger windows, going up to a 2 1/2 inch gap is usually recommended. If you have wider blinds, you may need to go with a bigger gap (e. g. 3 inches) to allow room for the slats to move without hitting the window frame.
Additionally, if you plan to hang drapes or curtains, then you should measure the length of the drapes or curtains and subtract an inch or two from that (rather than measuring the window) in order to account for the extra material.
Can you resize Hunter Douglas blinds?
Yes, you can resize Hunter Douglas blinds. Hunter Douglas offers many customization options, and offer several collections available in large sizes, including oversized heights up to 144” and wide widths up to 192”.
Additionally, you can customize even the most Standard sizes within an inch or so, providing you with the perfect fit for a room or window. This allows you to adjust the blinds to ensure they fit exactly the way you want.
Hunter Douglas also offer services that provide professional installers who can measure and install your custom blinds, ensuring they are properly adjusted and have a perfect fit.
How do I stop the lights from coming through the sides of my blinds?
The easiest way to prevent light from coming through the sides of your blinds is to install blackout curtains or shades. These curtains or shades are designed to completely block out all outside light, which should prevent any light from coming through the sides of your blinds.
If blackout curtains or shades are not an option, you could try adding blackout panel inserts to the sides of your blinds. These inserts are easily installed and will help reduce any light that seeps through the sides.
Another option is to simply install a filler panel on both sides of the blinds. This will help fill in the open area and prevent light from entering your living space.
How much gap should be on the side of a blind?
The size of the gap on each side of the blinds should be determined by the size of the window and the mount you plan on using. In general, a good rule of thumb is to leave at least one inch of clearance on each side of the blinds for inside mount installations and two inches for outside mount installations.
Make sure to allow for drapery hardware, if applicable, and a minimum of three inches of clearance at the top of the window frame. This will provide enough space for the top of the blinds to clear the window trim and open and close without binding.
Additionally, you’ll need to leave at least an inch and a half of clearance at the bottom of the window frame to allow for the bottom rail of the blinds to clear the frame. Finally, if you plan on mounting your blinds on the wall next to the window, allow a minimum of three to four inches of clearance on each side.
How do you cover a blind hole?
Covering a blind hole is relatively simple and can be done in a few steps. First, you will need to find a fastener that will fit the hole correctly. If the hole is too big or too small, use either a washer or plastic sheeting to make the hole the right size.
Once you have the right fastener, use a drill to insert it into the hole. You may need to use a plastic anchor to secure the fastener or drill further into the material if the fastener is not long enough.
After the fastener is inserted, you can use a nut and bolt combination to lock it into place. Finally, use a suitable cover to cover the hole and secure it with tape or another adhesive.
How do I close the gap in my vertical blinds?
If you have vertical blinds, it is important to make sure that they are closed properly. Closing the gaps in your vertical blinds is relatively easy. You can start by using a level or a ruler to make sure your blinds run level and that they are even on both sides.
You need to make sure that all of the slats run level, so they meet in the middle. If the gap is too wide, you can add pennies or pieces of cardboard to make the slats thicker at the bottom. This will help to close the gap.
If the gap is still not closed, you will need to carefully adjust the slats on the rods. You may need to move multiple adjacent slats to get the fit you want. You should also check the side cords and make sure that they are even on both sides.
If either side of the cord is longer than the other, adjust them accordingly. Finally, check the tilt wand and make sure that it is securely and tightly connected to the headrail. By following these steps, you can get the perfect closed fit for your vertical blinds.
How do you fix blinds that are too wide?
If the blinds in your home are too wide for your window, there are several steps you can take to effectively fix them. One option is to restring the cord or chain to adjust the size of the blinds. Carefully remove part of the covering fabric or plastic from your blinds noting the pattern and inspecting for existing cords or chains.
You’ll then need to remove the excess blinds and remeasure. Unscrew the pulley bracket from the head rail, slide off the excess blinds, and measure the new length. Once you’ve determined the new length, you can start the restringing process.
To begin, separate the cords and chains in the same order they were previously strung in the casing. This can be done by manually peeling them back if possible. The next step is to cut off the excess cords or chains and reattach the blinds while inserting the cords or chains back into the casing.
After the cords or chains are secured, the brackets must be reattached by reinstalling the screws. To finish, the excess fabric or plastic should be re-trimmed and taped into place.
Following these steps should properly fix your blinds if they are too wide. However, if the blinds are still too wide after restringing, it may be necessary to purchase a set of made-to-fit blinds for your window.
What is a standard window size for blinds?
The standard size for blinds is typically based on the size of the window. Blinds typically range in width from 24” to 72” and in height from 36” to 96”. However, most window treatments can be made to fit any size window, so you can also opt for custom measurements.
When determining the width size, it is best to measure the window in three places (top, middle and bottom) and use the longest measurement for the width size of the blind. As for the height, you should measure from the top of the window sill to the top of the window frame.
This measurement should be used for the height of the blind.
Should Roman blinds be recessed or not?
The choice of whether to recess Roman blinds or not should ultimately depend on your personal preference and the style of your home. Recessing your Roman blinds means mounting them beyond the window frame, which creates a more streamlined look that can often make windows appear larger.
On the other hand, mounting the blinds within the window frame can lend your home a more classic aesthetic, while also providing easier access to the window and any locks. If you like the idea of recessing your Roman blinds but lack the necessary wall space, consider a specialty installation option like an inside mount.
This allows you to install the blinds between the window’s sashes without having to go further into the wall. Ultimately, the decision to recess or not rests with you, but be sure to factor in the size of your windows and the layout of your home to ensure the best possible outcome.
