To exit BIOS Utility Advanced mode, you should press the F10 key on your keyboard while the BIOS Utility Advanced mode window is selected. This will bring up a confirmation dialog asking if you are sure you want to save and quit.
Select Yes and the system will apply the new settings and exit the BIOS Utility Advanced mode. Make sure to save any changes you want to keep before exiting the BIOS Utility Advanced mode. If you do not save any changes, they will be lost and you will need to re-enter BIOS Utility Advanced mode and apply them again.
How do I get out of UEFI BIOS utility screen?
To exit out of the UEFI BIOS utility screen, you need to use the arrow keys on your keyboard to move to the “Exit” or “Advanced” tab. Once you’re on the tab, you will have to use the arrow keys to select an option that states “Exit Saving Changes” or “Exit Discarding Changes” and press “Enter”.
Once you have selected one of these options and pressed “Enter”, the system will prompt you one more time to confirm your decision and then the UEFI BIOS utility will shut down and reboot. It is important to only choose one of the “Exit” options, as any other option could potentially cause mistakes or interruptions in the normal operation of your computer.
How do I boot to Safe Mode in UEFI BIOS?
To boot to Safe Mode in UEFI BIOS, you will need to use the special keys or shortcut to access the BIOS menu. Typically, the button used to access the BIOS menu is the same key used to enter the Setup menu, such as the Delete or F2 key.
Once you have accessed the BIOS menu, you can then use the up and down arrow keys to navigate to the Boot tab or Advanced tab.
From the Boot tab or Advanced tab, you can use the left and right arrow keys to select the Boot Mode option, which should be set to either UEFI or Legacy. If you are using a UEFI BIOS, you will need to select UEFI and then use the arrow keys to navigate to the Secure Boot entry.
To enable Safe Mode, you will need to Disable Secure Boot.
Once you have disabled Secure Boot, you can then use the arrow keys to navigate back to the Boot tab or Advanced tab and then select the Boot Priority option. From here, you can select either the UEFI Boot Order or Legacy Boot Order, depending on your BIOS setup.
The Boot order should be set to CD/DVD Drive, Hard Drive, and Network Boot.
After you have made the necessary changes to the BIOS settings, you can save and apply the changes by selecting the F10 key.Your computer should then restart, allowing you to boot into Safe Mode.
What happens when you restart UEFI firmware settings?
Restarting UEFI firmware settings can be beneficial for a number of reasons. When restarting UEFI firmware settings, the firmware updates itself to the latest version available from the manufacturer, which improves system performance and stability.
It also enables system features that may have been disabled previously. Restarting UEFI firmware settings also resets BIOS settings that may have been changed, which can be beneficial if there were errors or conflicts with some settings that were changed.
Additionally, resetting default settings might help fix certain errors, particularly those related to memory or devices. Finally, restarting UEFI firmware settings can remove malicious software, viruses, and other dangerous programs that have somehow gained access to the system by resetting the system to a “clean slate” condition.
What is UEFI setup style?
UEFI setup style is the Unified Extensible Firmware Interface (UEFI) setup style, which is the default boot manager used by computer systems that have UEFI as the firmware type. This setup style replaces the legacy BIOS used by older computer systems, and is responsible for the boot process on most newer systems.
UEFI setup style is a graphical user interface (GUI) environment used to configure system settings, manage device configurations and customize the user experience. Built on the Extensible Firmware Interface (EFI) standard, UEFI setup style is designed to provide a richer user experience with improved boot times and support for additional features such as secure boot, secure erase and multilingual support.
UEFI setup style is particularly advantageous for its ability to address larger disk sizes and optimize disk operations, as well as for its support for Windows 8 and later operating systems. It is important to note, however, that the UEFI setup style is not compatible with older operating systems such as Windows XP and Windows 7.
How do I start my Asus laptop in UEFI mode?
To start your Asus laptop in UEFI mode, you must first get into the boot settings screen by restarting your laptop and, while it is restarting, pressing the key that brings up the boot options menu, usually a function key such as F2, F12, or Delete.
Once you are in the boot options menu, select the option for ‘ UEFI’ and press Enter. Then, select the UEFI settings menu, which should appear in the list of available boot options. From here, you can configure your laptop to start in UEFI mode each time the system is powered on.
It is important to note that you will likely have to re-save the UEFI settings and exit the menu in order for the changes to take effect. Once you have done this, you should be able to restart your Asus laptop and it will boot in UEFI mode.
How do I get to HP Advanced BIOS features?
In order to get to the HP Advanced BIOS features you will need to access your computer’s BIOS. To access the BIOS, you need to press and hold the Esc key and then power on the computer. This will bring you to the Startup Menu with the F10 option.
Select this option, and you will be taken into the BIOS.
Once in the BIOS, you will then need to try to find the HP Advanced BIOS features setting. This can usually be found in the Settings section of the BIOS, which is usually the first option on the list.
From there, you may need to dig around to find the specific HP Advanced BIOS settings, but they should all be grouped together.
Once you have found the HP Advanced BIOS settings, you will then have the ability to alter settings such as boot order, system security settings, system optimization settings, and other settings related to your computer’s hardware configuration.
By adjusting these settings, you can tweak the performance of your computer and make sure it is running as efficiently as possible.
It is important to note that tinkering with the BIOS settings can cause instability for your system if not done properly, so always be careful when making changes.
How do I force ASUS BIOS?
In order to force ASUS BIOS, you will need to reset your BIOS settings by using the PIN jumper on the motherboard. This will restore the BIOS settings to their default values and allow you to access the configuration screen.
Once the BIOS screen has been accessed, the process of forcing ASUS BIOS will vary depending on the motherboard model. However, the basic steps are as follows:
1. Use the arrow keys to select the “Advanced” menu option.
2. Select the “CPU Configuration” tab.
3. Move to the “CPU Power Management” section and use the arrow keys to select the “ASPM” (Active State Power Management) option.
4. Use the arrow keys to select the “Always Enabled” option.
5. Use the arrow keys to select the “Save & Exit” menu option.
6. The system will reboot and ASUS BIOS will be forced.
When forcing ASUS BIOS, it is important to ensure that BIOS settings are compatible with the hardware that is installed in your system. Incorrect settings can lead to system instability or damage to components.
It is also recommended to perform frequent backups of your BIOS settings to ensure that you don’t revert to an incompatible state if something goes wrong.
Can I access BIOS without restarting?
Yes, you can access BIOS without restarting your computer. Depending on the make and model of your computer, there are several different ways to access BIOS without restarting the computer.
If your computer has a dedicated BIOS access key, it can usually be accessed by pressing the appropriate key while the computer is starting up. The BIOS access key will typically differ between different makes and models of computers.
If your computer does not have a dedicated BIOS key, you may be able to access BIOS from the boot menu. To access the boot menu, you will need to press a key – such as F12 for Dell computers or ESC for HP computers – when your computer is starting up.
Once the boot menu appears, you can select the option to enter “Setup” or “BIOS. ”.
If these traditional methods of accessing BIOS without restarting your computer do not work, you may be able to access BIOS via an option in Windows. To do this, type msconfig in the search box in the Start menu and hit the Enter key.
When the System Configuration window appears, select the Boot tab. From this tab, you should see an option to enter ‘BIOS Setup’ or something similar. Select this option, save your changes and you should be able to access your computer’s BIOS.
However, do note that you should only enter BIOS for troubleshooting purposes, as making changes in the BIOS can cause serious problems. Be sure to consult the user manual for your computer before making any changes in the BIOS.
Where is advanced options located?
Advanced options can be located in different places, depending on the system you’re using or the application you’re working with.
On Windows 10, you can access Advanced options from the Start menu. Click the Start button, type “Run”, and press Enter. This will bring up the “Run” window, which you can use to access the Advanced Boot Options menu.
Once the menu is open, you can use it to access various system recovery options, such as startup repair, command prompt, boot into safe mode, and others.
In some web browsers, such as Chrome, you can find advanced options in the settings menus. Click the three-dot menu in the top right corner and select Settings. Scroll down to the bottom of the page and click the “Advanced” link to access various options, including privacy, content settings, and more.
Some applications have a “Preferences” or “Options” menu that can be used to access Advanced options. This menu will vary depending on the application you’re using. Generally, it can be found under the Tools menu or in the menu bar of the application.
Another way to access Advanced options is by using the Command Prompt. If you’re familiar with using commands in the shell, you can use them to access various system settings. For example, you can use the “DISKPART” command to access the disk partitioning options.
How can I enter BIOS if F2 key is not working?
If using a traditional keyboard and F2 is not working to enter BIOS, there are a few other keyboard shortcuts you can try depending on your specific system:
-Esc or Delete keys: Some computer manufacturers use the Esc or Delete keys for BIOS entry.
-Ctrl+Alt+Enter: This shortcut is used on some Dell computers.
-Ctrl+Alt+S: This shortcut is a common method to access the InsydeH2O setup utility.
-Ctrl+Alt+Esc: This shortcut could also work to access the BIOS menu.
-Ctrl+Alt+Ins: This shortcut is used on some HP systems to access the BIOS.
-Fn+Esc: This shortcut is used on HP systems.
-Fn+F1: This shortcut is used on some Lenovo systems.
-Fn+F2: Some Lenovo systems use this shortcut to enter the BIOS.
-Fn+F10: Some Lenovo systems use this shortcut to enter the BIOS.
-Fn+F12: Some Lenovo systems use this shortcut to enter the BIOS.
-F11: Some Asus systems use this shortcut to enter the BIOS.
If none of these methods work, you could also remove the battery from the motherboard to reset your BIOS settings back to default. This should allow you to access the BIOS menu with the F2 key or other shortcut keys.
However, if this still does not work, you will likely need to use the physical reset switch on the motherboard to reset the BIOS altogether.
How do I enter Windows BIOS?
Entering Windows BIOS is a relatively straightforward process. It is typically done when you first power up your computer after booting or when you need to access BIOS settings to change how your computer operates.
The first step is to locate the key on your keyboard that accesses BIOS settings. This key is usually labeled “F2”, “F10”, “Delete”, or “Esc”, but it can vary between computers and manufacturers. Once you identify the correct key, you will need to press and hold it while the computer is booting up.
Once you’ve accessed the BIOS, you will be presented with a list of settings, options, and menus that can all be used to change various settings and customize how your computer boots up. It is important to be careful when making changes, as incorrect settings can cause your computer to not boot up at all.
In most cases, once you have finished making your changes, simply press the “F10” key to save and apply them. If you do not save and apply your changes, they will not take effect and your computer will continue to boot up in its original configuration.
Once you’ve finished making changes, you can exit the BIOS by pressing “F10”, or the appropriate key or combination of keys based on your computer. Once you’ve exited, your computer will restart and the settings you changed will be applied.
Why does my PC keep going to UEFI BIOS utility?
Your PC may be going to UEFI BIOS utility due to a few different reasons. If your PC has recently had a hardware change, the BIOS may need to be updated. If Windows was recently upgraded, the BIOS may need to be updated to ensure compatibility.
Additionally, a faulty hardware device or incorrect BIOS settings may be causing the PC to continually reset itself and go back to the BIOS utility. If a problem persists, it might be necessary to reset the BIOS back to its default settings, or reinsall the BIOS.
How do I restore my Asus BIOS to factory settings?
Restoring your Asus BIOS to factory settings can be done by following the steps below:
1. Enter the BIOS setup menu by pressing the “F2” key while your computer is booting up.
2. Navigate to the “Advanced” tab and select “System Configuration”.
3. Select the “Load Optimized Defaults” option and press “Enter”.
4. Select “Yes” on the confirmation window that appears and press “Enter”.
5. Save your changes, by pressing the “F10” key and select “Yes” to confirm.
6. Your Asus BIOS has now been restored to its original factory settings.
It is important to periodically restore your BIOS to factory settings to ensure that all features are running properly. You can also restore your BIOS to factory defaults if you have made changes that have caused your system to become unstable.
How do I reset my UEFI BIOS password?
Resetting your UEFI BIOS password can be done fairly easily, however this is only possible if you have physical access to the computer. If you are not the original owner of the computer and don’t have the login credentials, you will need to find the jumper reset pins on the motherboard that will reset the BIOS password to the factory default and follow these steps:
1. Unplug the power cable and open the case to the computer in order to gain access to the motherboard.
2. Identify the jumper or dipswitch on the motherboard that is labeled “Reset Password” or something similar.
3. Moving the jumper or dipswitch to the correct position will reset the UEFI BIOS password to the factory default.
4. After the password has been reset, replace the jumper or dipswitch back to the original position and replace the cover to the computer.
5. Plug in the power cable to the computer and turn it on.
6. Enter the BIOS by pressing the appropriate key on the keyboard, typically either F2 or the DEL keys.
7. If the password has been successfully reset, you will not be prompted for a password and can navigate through the BIOS menus to make any necessary changes.
Before attempting to reset the UEFI BIOS password on a computer, be sure to check with the manufacturer to make sure that it is possible and to ensure that you are doing it correctly as this can have unintended consequences in some cases.
What is the UEFI password?
The UEFI password is a type of security password that restricts access to your computer’s UEFI (also known as BIOS) settings. It is usually set up when you first purchase the device and is found in the documentation provided by the manufacturer.
If you are attempting to access the BIOS settings without entering a correct UEFI password, you may be met with the message: “This computer system is protected by a password authentication system. You cannot access the data on this computer without the correct password.
” If you have forgotten your UEFI password and need access to the BIOS settings, you will need to refer to the manufacturer’s instructions on resetting it.
