In order to fix your Intex salt generator, you’ll need to determine the exact issue. If your salt generator is not producing chlorine, you may need to perform some basic troubleshooting steps, such as checking the pH level in your pool to make sure it is within normal range, checking to make sure the salt cell is functioning correctly, and replacing the cell if necessary.
You may also need to clean the salt cell, especially if it’s been in your pool for a while. Follow the manufacturer’s instructions for cleaning the cell, as there may be different processes for different models of salt generators.
You can also use a vinegar-water solution or a handheld garden sprayer to remove any scaling and help prevent future buildup.
If the salt generator still isn’t producing chlorine, you’ll need to check the displayed codes from the machine, as these codes can usually help identify the primary cause of the problem. Additionally, you should check the flow rate of the water coming from the salt generator and make sure that it is within the manufacturer’s specifications.
If the flow rate is too low, it can cause insufficient chlorine production.
Lastly, if you are still unable to fix your salt generator, you may want to contact the manufacturer for specific troubleshooting steps, or consult with a professional pool service technician for assistance.
What is code 91 on Intex saltwater system?
Code 91 on an Intex saltwater system is an over-salinity error signal. When this code appears, it indicates that the salinity level of the pool is at an incorrect level. This could be due to a variety of sources, including abnormal water evaporation, incorrect salt dosage, or a malfunctioning saltwater generator.
To rectify this issue, the salinity of the pool needs to be adjusted back to the desired level. This can be done by checking the salt readings on the generator, adding additional salt to the pool to bring the salinity up, or both.
Additionally, it is essential to check the pool’s water chemistry to make sure that all other levels are at their appropriate levels.
Why is my Intex saltwater system not producing chlorine?
There could be a few different reasons why your Intex saltwater system is not producing chlorine. The most likely cause is that the system may not be generating the proper amount of salt to be able to create enough chlorine.
Since the Intex saltwater system relies on the process of electrolysis to generate chlorine, the salt level must be within the recommended range for the system to work properly. If the water contains too little salt, there will not be enough salt to provide electrolysis and create chlorine.
To check the salt level, you can run a test on the water. Additionally, the chlorinator may not be working correctly due to a number of different issues. This could include low or no flow of water in the system, or an issue with the power supply or the chlorinator itself.
If the water flow is low, check the pump and backwashing system and make sure it is in proper working condition. If the chlorine level is low, check the power cord connecting the power supply and the cell, and make sure it is not loose or damaged.
If all of these options are still not working, it may be time to replace the chlorinator.
What happens if salt level is too high in pool?
If the salt level in a pool is too high, it can cause a variety of potential issues. Depending on the severity of the imbalance, it can affect swimmers’ skin and eyes, damage equipment, cause discoloration and even corrode the pool itself.
High salt levels can also be very difficult to balance, as the chlorine generator system keeps adding salt through each cycle of sanitization.
The most noticeable consequence of too much salt in a pool is the intense discomfort that swimmers may experience. Splashing water in their eyes or excessive exposure to the water can cause itchy, red eyes, and irritation or burning of the skin.
The longer someone is exposed to the waters, the more extreme their reaction may be.
Another repercussion of too much salt is the buildup of scale and corrosion in and around the pool. High salt levels can also lead to clogged pipes, as salt particles can leave deposits in the plumbing and lead to blockages.
Furthermore, pool tiles, plaster and metal rails can corrode and deteriorate due to the high salt levels. This can cause discoloration, making the pool look unappealing.
Keeping an eye on the salt levels in a pool and taking appropriate measures when needed will minimize the effects of the imbalance and help maintain the pool’s health and beauty. In order to help keep salt levels in check, be sure to follow the recommended sanitizer levels and do regular maintenance on your pool’s chlorination system.
How do I lower the salt in my pool without draining?
The first and most important step is to limit how much salt you are adding to the pool in the first place. If possible, reduce the amount of salt you are adding or consider switching to a less concentrated salt product.
In addition, regular backwashing of your filter can help to prevent salt buildup. Backwashing should be done at least once every month as well as after heavy usage or storms. Furthermore, always check your systems pressure settings and make sure they are at the recommended levels.
If salt levels have already built up, a few methods can help lower them. Adding reverse osmosis or fresh well water to the pool can help dilute the salts. This will require you to use a third party provider for the fresh water, so it may not be the most practical solution.
It is also important to not add too much fresh water to the pool as this can cause other problems such as scaling, staining, and cloudy water.
Another option is to use a salt flocculant product. Such products use polymers to bind together small particles of salt, thus allowing them to be filtered out and eliminated from the water. It is important to follow the directions carefully and not to over or under-dose the flocculant.
Finally, you may need to professionally clean and balance your pool chemically. This typically requires draining a significant portion of the water and performing a thorough cleaning to get rid of scale build up and clear out all of the algae, debris, and salt.
Then the professional can help you balance the chemicals and salt levels in the pool.
How often should I shock my saltwater pool?
The frequency with which you need to shock your saltwater pool depends on a variety of factors, including the amount of sunlight, humidity, and other environmental variables in your area as well as the type of pool and the amount of swimmers or other users of the pool.
Generally speaking, it’s best to shock a saltwater pool once a week, but it can be beneficial to shock more frequently if chlorine levels drop quickly in your pool or if there has been heavy usage or environmental factors that could lead to a rapid loss of chlorine in the water.
Additionally, if your pool has an automatic pool cleaner, you should shock your pool each time the cleaner is used. This will ensure that chlorine levels remain at their optimal level. Lastly, it’s important to shock just prior to adding more salt.
Overall, shocking your saltwater pool as often as once a week is recommended, but if your pool loses chlorine quickly or is receiving heavy usage, more frequent shock treatments may be beneficial.
How do you clean a salt cell?
To clean a salt cell, you need to exercise proper maintenance and cleaning. This will ensure that the cell remains working efficiently and producing sanitized water. Here are some tips on how to properly clean and maintain your salt cell:
1. Remove any dirt or debris: First, remove any visible dirt or debris from the cell. If necessary, remove the plate or plates from the cell and clean them manually. Be sure to rinse off any dirt and debris in the affected area.
2. Use a scraper or brush to remove calcium build-up: Using either a plastic scraper or a stiff brush, clean off any calcium deposits that have built up on the plates. This is an important part of the process as it ensures that the cell is free of any obstructions that might restrict the flow of salt water.
3. Check the electrolyte level: After cleaning the cell, check the level of electrolyte solution inside. It is important that the electrolyte level stays at a consistent level for the cell to function properly.
4. Rinse your salt cell regularly: It is recommended that your salt cell should be rinsed every four to six weeks. While doing this, be sure to remove any build-up of calcium or other minerals. Also, use a solution that is designed to clean salt cells and replace any electrolyte solution if it is necessary.
5. Monitor the salt levels in the water: The salt levels that are present in the water can have an effect on the cell’s performance. So, be sure to monitor the salt levels in the water regularly and adjust as necessary.
These steps should help you to keep your salt cell working efficiently and producing sanitized water. Maintaining it regularly will ensure that your cell remains in good condition and continues to produce clean and safe water.
How much salt do I put in my Intex saltwater tank?
The amount of salt you need to put in your Intex saltwater tank depends on a few factors such as the size of your tank, the type of fish or other inhabitants living in the tank, and the amount of water being added to the tank.
Generally, the amount of salt added to Intex saltwater tanks should be between the range of 1.020 to 1.026. A general recommendation for Intex tanks is to use AquaSafe Salt, which is sold in a convenient, pre-measured pouch for aquariums of up to 55 gallons.
The manufacturer recommends adding 4 parts AquaSafe Salt for every 10 US gallons (37.9 litres) of water. Be sure to also use an accurate hydrometer to test and confirm the salinity level in your tank.
How do you use Intex Krystal Clear Saltwater?
Intex Krystal Clear Saltwater is a line of products designed to help you create and maintain a safe and enjoyable saline pool. The products are designed to provide a solution to the challenge of chlorine-free aqueous pools without the use of harsh chemicals.
To use Intex Krystal Clear Saltwater, begin by reading through the instructions that come with the product. You must use the product with a compatible Intex Saltwater System filter pump. Then, fill the pool with fresh water before adding salt to the filter pump.
The filter pump should be equipped with a chlorine generator cell, on which you must attach the electrolytic (or metalcycling) cell from the Intex Krystal Clear Saltwater pack you purchased.
Once the direction-sensitive salt gauge is properly set up, turn the filter pump on and wait for the chlorine level to build up. Depending on the size of your pool, this may take several hours. Once the chlorine level is high enough, the system will be activated and chlorine will be released into the pool in small, regulated amounts.
You can regulate the chlorine level through the Intex Krystal Clear Saltwater system, or turn the generator off on sunny days when the UV rays boost the rate of evaporation.
Keep in mind that Intex Krystal Clear Saltwater systems should only be used with Intex pool filter pumps. Always follow the instructions carefully, and check the filter and electrolytic cells every two weeks, or when the chlorine level drops.
When salt levels drop below the recommended opacity, it’s time to add more. If the salt levels are too high, you can use a pool-safe calcium-hardness reducer to reduce the salt concentration.
How long should I run my Krystal clear saltwater system?
The amount of time you should run your Krystal clear saltwater system depends on a variety of factors. The size of your pool and the amount of chlorine being used will play a large part in determining the amount of time that your system should run.
Generally speaking, the larger the pool and the greater the amount of chlorine, the longer the system should run in order to ensure that all of the chlorine is effectively removed. Additionally, any environmental factors such as the temperature, wind, and humidity, can also play a role in how long the system should be operated.
In general, the system should be run for at least two hours every day. This should be done in the morning and evening, with an extended period of running time (eight to twelve hours) when the chlorine demand of the pool is at its highest.
The system should also be monitored regularly to ensure that it is operating efficiently and in compliance with the manufacturer’s instructions. If any issues are noticed, they should be addressed immediately to prevent any potential damage to the system.
How do I know if my salt cell is working?
To determine if your salt cell is working, you should first check to make sure it is installed correctly, that all the connections are tight, and that the power is running correctly. If all these items check out, you can then test the water to see if the salt levels are up to pool industry standards.
You can do this by taking a water sample and performing a salt test to ensure that the salt concentration is between 3,000 to 3,500 parts per million (ppm). If the salt levels are too low this indicates that the salt cell is not properly converting the salt into chlorine.
Additionally, you may be able to visually inspect the pool to see if the chlorine levels are up to normal levels or not. If the chlorine levels are low, then you know the salt cell is not working properly.
Lastly, you can listen for a buzzing sound which indicates that the cell is turning on and off. If you don’t hear a sound, then the cell is not producing chlorine.
How many hours a day should a salt water pool pump run?
The exact number of hours a day a salt water pool pump should run depends on several factors, such as the size of the pool and the climate. Generally speaking, it is recommended that a salt water pool pump should run 8 to 10 hours each day in order to keep the pool clean, balanced, and healthy.
If your climate is hotter and more humid, it may be beneficial to run the pump for longer periods of time. On the other hand, if it is cooler and the humidity is low, the pump may need to run for a shorter period.
Your pool size also impacts the amount of time the pump needs to run. Generally, larger pools require longer amounts of time, while smaller pools require less. Additionally, your pool chemistry, such as the levels of chlorine, pH, and alkalinity also affect how long your pump runs.
If these levels are off, your pump may need to run for longer periods of time. Ultimately, it is best to speak with a pool expert or your local pool store in order to determine the best amount of time for your pool pump to run.
Is it better to run a pool pump at night or day?
The answer to this question largely depends on the purpose for running a pool pump. In general, it is better to run a pool pump at night rather than during the day, for several reasons:
First, depending on where you live, running a pool pump during the day can be more expensive. This is due to peak energy pricing, whereby electricity prices, from a utility company, are higher during the day than at night.
Generally speaking, running a pool pump at night can lead to energy savings that may be up to 25-50 percent, depending on which electricity rate structure you use.
Additionally, running the pool pump during the day can cause noise pollution. This may not be a problem if you’re home all day, but it can be quite disruptive if you work during the day.
Finally, it is recommended to run a pool pump at night as that is when most pool maintenance tasks are best performed. During the night, pollutants such as leaves, and other debris are less likely to be drawn into the pool filter.
This also reduces the amount of filter cleaning and maintenance needed during the day. Additionally, most pool chemicals, such as chlorine and algaecide, are more effective at night since photosynthesis is not taking place.
This means that chemical treatments are more likely to work more effectively at night than during the day.
In conclusion, it is usually better to run a pool pump at night rather than during the day. Doing so can lead to potential energy savings, as well as reduced noise pollution and more effective chemical treatments.
Should I run my pool pump while swimming?
No, it is not recommended that you run your pool pump while swimming. The main reason for this is that pool pumps can create a hazardous environment for swimmers. If the pump’s impeller or suction inlet is not properly screened, the water can be consumed or drawn into the pump and create the potential for a suction entrapment hazard.
This hazard occurs when body parts, clothing, or other objects become entrapped by the powerful suction force coming from the pump’s inlet, causing a person to be held underwater. Additionally, a pool pump can cause a swirling or boiling effect at the surface of the pool that makes it difficult for swimmers to move around.
For these reasons, it is best to turn off the pool pump when pool users are in the water.
How long should saltwater pool filter run?
Saltwater pool filters should run continuously, typically between 8-12 hours per day, in order to keep the water clean and clear. Running the filter for more than 12 hours per day is not generally recommended as it increases the wear and tear on the pool filter, pump, and other associated mechanical parts.
Additionally, running the filter longer does not necessarily lead to any increased benefit on the overall health of the pool. Consequently, setting the pool filter to run for 8-12 hours each day is the advised practice for keeping a saltwater pool system running effectively and efficiently.
What chemicals are needed for Intex saltwater pool?
Intex saltwater pool systems require chlorine and salt for proper operation. The Intex pool salt, referred to as “EasySet Pool Salt” is specifically designed for use with Intex saltwater systems. The primary active ingredient in Intex salt is sodium chloride, which is a natural chemical found in seawater.
Chlorine must also be added to the pool water to sanitize it and balance the pH. The Intex saltwater system uses a salt cell, which converts the salt in the water into chlorine. The chlorine produced by the salt cell is fairly gentle, and it works better when the salt content of the water is at a standard level of 3,000 parts per million (ppm).
It is important to keep the chlorine levels stable, so they should be tested and adjusted as needed. In addition to chlorine and salt, Intex saltwater systems may require other types of chemicals to maintain the balance of the water, including pH balancing chemicals, stabilizers, algaecides, and clarifiers.