The most common cause of your PS4 controller not charging is due to a faulty USB cable or port. So the first step in fixing your PS4 controller not charging is to check the USB cable and port for any damage.
If the cable looks damaged or worn out, replace it with a new one. If the port looks damaged, check to make sure it is clean and free from any obstructions. If it is still not working, try using a different USB cable or port.
If the USB port and cable appear to be in good condition and your controller still won’t charge, the next step is to check the battery. Try replacing the battery with a new one and see if that solves the issue.
If the new battery doesn’t work, try restarting your PlayStation 4 system and obviously make sure it’s powered on during the charging process.
If the above steps don’t fix the problem, the next step is to inspect the charging port on the controller itself. If the port looks damaged or worn out, replace it with a new one or try a different controller.
If none of the above fixes solve the issue, it’s possible that there is a problem with your PlayStation 4 system itself. If possible, try a different system to ensure that the issue is with your controller and not the console.
If the controller still won’t charge on the other system, then it may be a problem with the controller itself. If this is the case, you’ll likely need to get your controller serviced or replaced by Sony.
Why is my PS4 controller blinking and not charging?
One of the most common causes is that the battery in the controller may have come to the end of its life and needs to be replaced. Usually, when a controller’s battery is no longer holding a charge, the controller will begin to blink as a warning.
The other possibility is that the cable used to charge the controller may be faulty. If the cable is not providing a reliable connection and consistent power, the controller will not charge properly.
If the battery and the cable have been tested and are in working condition, and the controller still does not charge correctly, it may be a sign that the USB port on the console may be damaged and in need of repair.
Additionally, if the PS4 console is overheating it can cause issues with charging, so it is a good idea to make sure your console is properly ventilated and in a cool area.
Is there another way to charge PS4 controller?
Yes, there is another way to charge a PS4 controller. You can charge the controller with a USB cable connected to your PS4, your computer, an AC adapter, or a charging station. To charge the controller while it is in use, the USB cable needs to be connected directly to the PS4 system.
If the controller is not in use, you can connect the controller to your computer using a USB cable and the computer can charge the controller as well. You can also purchase an AC adapter or charging station to charge the controller.
Finally, you can also purchase an extended length USB cable so you can play while the controller is charging.
How do you fix a dead PS4 controller?
If your PS4 controller is not responding or connecting, there are a few steps you can take to try and fix the issue.
First, check that the controller is up to date with the latest firmware. You can do this by going to “Settings” on the home screen of your PS4 and then selecting “Devices. ” From there, go to “Controllers” to check for updates.
If an update is available, follow the on-screen instructions to download and install it.
Next, try connecting your controller using a USB cable. Plug the small end into the controller and the large end into one of the USB ports on the front of the PS4. If your controller still isn’t working, try using a different USB cable and port.
Also, make sure the cable is firmly plugged into the controller and that no other devices are plugged into any of the USB ports.
If the above methods do not work, you can try resetting your controller. There is a small hole on the back of the controller, located under the L2 button. You’ll need to use a paperclip or similar tool to push the button inside the hole.
This will reset the controller.
If all else fails, it may be time to replace your controller. You can purchase a new controller from the PS4 store or from a third-party retailer.
How do I clean my PS4 charging port?
Keeping your PS4 clean and dust-free can help extend its lifespan and prevent any potentia hardware issues. For the charging port, you’ll need to use a cotton swab and rubbing alcohol, which can be purchased from most drug stores and online.
Start by unplugging your power cord, and then carefully turn the console over to reveal the charging port.
Gently dip the clean cotton swab in the rubbing alcohol, and then wipe the port’s entry point. Be sure to clean as much of the port as you can, especially any threads or grooves.
With the swab still damp with the alcohol, run it along the side of the port to get any debris, lint or dust that may be accumulated.
Once you’re done wiping it with the alcohol, use a dry cotton swab to dry up any leftover alcohol, and then let the port air dry.
Finally, plug in the power cord and test it out to see if you can power the console on without issue. If this doesn’t work, then repeat the cleaning process to make sure you cleaned it adequately.
Can you charge PS4 controller from wall?
Yes, you can charge your PS4 controller from a wall outlet. To do so, you will need the official Sony Playstation 4 USB cable and a suitable USB power adapter that supplies at least 0.5A of current. First, connect the USB cable to the USB port on the controller, then connect the other end of the USB cable to the power adapter.
Plug the power adapter into a wall outlet and the controller will start charging. The light on the top of the controller will indicate that it is charging, turning from orange to white when full. When the controller is fully charged, the light will turn off.
Additionally, you can also use the USB port on your Playstation 4 console to charge the controller.
Can you connect PS4 controller to PS4 without USB?
No, it is not possible to connect a PS4 controller to a PS4 without USB. The DualShock 4 controller uses a USB connection to interface with the console, so the controller would have to be connected to the console with a USB cable in order to work.
Additionally, the PS4 also uses Bluetooth to connect controllers wirelessly, so a controller can be connected to the PS4 without a USB cable if the controller is set up with the PS4’s Bluetooth connection.
How do you get gunk off charger port?
Getting gunk off of a charger port can be a tricky process. It can be helpful to use a cotton swab, toothbrush, or an old, soft cloth. To protect the outer casing of the port, consider lightly wrapping the cloth or swab in plastic wrap or tape.
Start by gently swabbing the port with a cotton swab dipped in rubbing alcohol. If that doesn’t work, gently brush the port with an old, soft toothbrush. Wipe the gummy residue off with a soft cloth dampened with rubbing alcohol.
Make sure to wipe the port in the same direction. If you’re having trouble seeing the gunk, you can use a magnifying glass.
For stubborn stains, you may need to use a mild cleaner that is safe for electronics like isopropyl alcohol, nail-polish remover, or vinegar. Put a few drops of the cleaning solution onto the cloth or swab and gently wipe the port.
Then, use a fresh cloth dampened with water to rinse off the cleaning solution.
You may need to complete cleaning steps multiple times to get all of the gunk off of the port. If you’re having trouble getting gunk out of hard-to-reach areas, consider using a small tool like a tweezer, needle, or toothpick to get at the gunk.
Be sure to handle the port with care to avoid causing damage.
How do I clean the USB ports on my controller?
You can clean the USB ports on your controller by using a lint-free cloth and rubbing alcohol. Before cleaning the ports, make sure to turn off your controller and disconnect it from any device it is connected to.
Take the cloth and lightly dampen it with rubbing alcohol. Do not soak the cloth in rubbing alcohol as this could damage the controller. Begin to wipe down the ports, making sure to get around the edges and into any crevices.
Once the ports are clean, leave the controller to dry completely before powering it on and connecting any devices.
