Manually locking a TTLock is a very simple process. First, start by pressing the button on the top of the lock with your thumb. Once the green LED light turns on, you will know that the lock is in the unlocked position.
Then, press and hold the button for 3 seconds until you hear two beeps and the green light flashes twice. This will indicate that the lock is now manually locked. If you want to unlock the lock, simply press the same button and repeat the steps outlined above.
How do I remove TTLock lock?
Removing the TTLock lock is relatively straightforward and can be accomplished with only a few simple tools. Depending on the type of lock you have, you may need a special removal tool that can be purchased from many retailers.
1. To begin, open the door as far as it can go and then shut it.
2. Use a flathead screwdriver to remove any exterior screws holding the faceplate. Be careful not to damage the frame of the door.
3. You will now see a metal cylinder behind the faceplate. This is the lock cylinder and holds the actual lock mechanism in place. Remove it by unscrewing any fixtures that hold it in place.
4. Now, locate the keyhole. Depending on the type of lock you have, you may need to unscrew a small metal circle to access the keyhole.
5. Put the removal tool into the keyhole and turn it clockwise. This should release the mechanism from the lock cylinder, allowing it to be taken out.
6. Once the mechanism has been pulled out, the lock cylinder can be removed from the door.
7. Inspect the door for any damage caused by removing the lock. If there is damage, it can be repaired with a putty knife and some wood glue.
Removing a TTLock lock is relatively easy and only requires a few simple tools. With the right tools and a bit of patience, you can successfully remove the lock and have your door open in no time.
What is TT lock app?
The TT Lock App is a companion app for the TT Lock Smart Lock system. It is a powerful and convenient way to control your home’s security from your smartphone. It provides you with features such as remote access, allowing you to unlock your door with your phone.
You can also set up auto close, which helps make sure that your door is securely locked after a certain amount of time. Furthermore, you can receive notifications when people use your lock and monitor their activity from anywhere.
It is a simple, yet detailed way to manage your security with one easy to use app.
How do you unlock a passcode lock?
To unlock a passcode lock, you will generally need to enter a specific code sequence. Depending on the device and its settings, you might need to enter a traditional code made up of four or more digits, or it could call for a more complex password.
Some locks might also require a fingerprint, specific knock pattern, or a combination of more than one security measure. If you don’t know the specific code, some models will allow you to reset it depending on the make and model of the device and security system.
If you really can’t access it, the only other option may be to contact the manufacturer or a locksmith to have the lock reset or even replaced.
How do I change the battery on my TT lock?
Changing the battery in your TT Lock is a relatively straightforward process.
The first step is to locate the battery compartment at the back of the lock. If the compartment is secured with a screw, remove it with a screwdriver. Then, carefully open the battery case, making sure not to disconnect any of the other internal wires.
Next, take out the old battery, which should slide out easily. Insert the new battery, aligning the +/- symbols on the battery and the compartment. Make sure the battery is properly locked in place before closing the case and reassembling the screw.
If the lock was not working before, it should now. If the battery doesn’t seem to take a charge, try to replace it and restart the pairing process with your smartphone.
That should do it! Changing the battery in your TT Lock is relatively simple, and should have your lock up and running in no time!
What does G2 Gateway do?
G2 Gateway is a comprehensive, cloud-based platform designed to provide secure and reliable digital payment processing services. It allows businesses of all sizes to accept, manage, and process payments electronically in a secure, cost-effective and convenient manner.
Gateways are the bridge between online merchants and banks, ensuring secure payments for the merchants and reliability for their customers.
G2 Gateway eliminates the need for physical terminals and card readers, enabling merchants to accept payment from any device including credit cards, debit cards, stored value cards and others. Payment information is securely processed and stored, allowing for fast and secure payments.
It also has comprehensive fraud protection, allowing merchants to flag suspicious or fraudulent payments. The platform also includes sophisticated reporting and analytics, allowing merchants to understand customer behaviour and payment trends.
G2 Gateway also includes tools for customer service, such as refunds and cancellations. All in all, G2 Gateway provides a secure and reliable platform for merchants to process digital payments.
How do I connect TTLock to Gateway?
To connect a TTLock to a Gateway, the following steps need to be taken:
1. Set up the Gateway. Before you can connect the TTLock to the Gateway, the Gateway needs to be set up and configured for the specific smart lock it will be connecting to. Depending on the type of Gateway you have, the steps to do this may vary.
Refer to your Gateway’s user manual for specifics.
2. Connect the TTLock to the Gateway. Once the Gateway is set up, you will need to connect the TTLock to it for the two devices to communicate. Refer to your Gateway’s user manual for details, but typically the steps involve taking off the back cover of the lock and connecting it to the Gateway according to the directions given.
3. Set up the Gateway connection with the TTLock. After the TTLock and Gateway are connected, the Gateway needs to be set up to communicate with the lock. Again, this will vary depending on the type of Gateway you have, but normally you will need to provide the Gateway with the TCC, ID and other parameters of the lock to establish a connection.
Refer to the Gateway’s user manual for details.
4. Link the TTLock with a mobile device. Once the Gateway is set up to communicate with the TTLock, you can then link the lock to a mobile device so that you can control it remotely. This will require downloading an app corresponding to the lock type and providing it with the necessary credentials to establish a connection.
Refer to the app user manual for details.
Once these steps are complete, the TTLock should be successfully connected to the Gateway and you should be able to control it remotely.
How do you use hornbill lock?
Using Hornbill Lock is quite simple and straightforward. To get started, you’ll need to download the Hornbill Lock app for your device.
Once the app is installed, you’ll need to sign up for an account and create a unique PIN for the app. This PIN will allow you to access the app and any secured areas.
Once you have set up your PIN, you can then use Hornbill Lock to secure your device. All you have to do is select the areas of your device that you want to secure, such as your photos, contacts, or financial information.
Once they’re selected, they’ll be locked down with the secure Hornbill Lock app.
To access these areas or make any changes in the app, you will need to enter your PIN. This will ensure that only you have access to the information, keeping your device and data secure.
You can also use Hornbill Lock to secure other areas of your life, such as your bank account or social media profiles. Just like with your device, all you need to do is enter your PIN to access those accounts, and you can be sure that your information is secure.
Overall, using Hornbill Lock to secure your device and data is a simple and effective way to ensure that your information remains safe and secure.
Does TTLock work with Google home?
Yes, TTLock does work with Google Home. This can be done through a Google Assistant-compatible smart lock, including TTLock’s Smart Lock Pro. The Google Home app must be used to setup the smart lock connection.
Once setup is complete, users can lock/unlock doors by using simple voice commands. This helps to increase convenience and security, as users can access the smart lock from anywhere. Further, users can also create schedules to lock/unlock the door at specific times of the day and add multiple users with varying access rights.
What is privacy lock TTLock?
Privacy Lock TTLock is a smart digital lock that is based on encryption and user authentication technology. It is designed to provide unparalleled security and convenience to its users. The digital lock provides an extra layer of security by utilizing two-factor authentication and encryption technology.
It also comes with built-in fingerprint recognition and a privacy function that can be activated to prevent any unlocking attempts from unauthorized persons. With the added layer of protection, this digital lock is the perfect solution for people looking for an added level of security for their homes and businesses.
The user can also set their own customized password, or even enable additional access rights that can be used by approved people using a Bluetooth or QR code. This allows for maximum control and flexibility over who has access to your home/office.
Additionally, the Privacy Lock also has a built-in emergency key override which can be used as a fail-safe in case of an emergency. This level of security and convenience makes Privacy Lock a popular choice for both homes and businesses.
How do I reset my Kiwi lock?
Resetting your Kiwi lock is a pretty simple process. The first step is to locate the reset button, which is usually located at the back of the unit. Once you have located the button, you simply need to press and hold it for between 5 and 10 seconds, until the lock’s red light flashes three times.
This indicates that the lock has been successfully reset.
Once you have reset your Kiwi lock, you will be prompted to enter a new PIN code. It is important to remember your new PIN code, as without it, you will not be able to unlock your door.
You can also reset your Kiwi lock using the mobile app. Simply open the app and navigate to the settings menu. Here you will be able to find an option to reset the lock. Once you have pressed this, the reset process will start, and you will be prompted to enter a new PIN code.
By following the steps outlined above, you can reset your Kiwi lock in just a few minutes.
What app does Smonet use?
Smonet uses a mobile and web-based app to provide comprehensive home security and automation solutions. The app allows users to monitor their home security system and control their home automation devices from one secure dashboard.
Some of the features included in Smonet’s app are surveillance cameras, door and window sensors, smoke and fire detectors, access control, arming/disarming, and home automation. With Smonet’s app users can view live-streaming footage of their security cameras, receive alerts when doors and windows are opened, monitor and control smoke and fire detectors, and much more.
Additionally, Smonet’s app allows users to control the temperature in their home, adjust their home’s lights and shades, and control smart home devices such as door locks and entry systems. The app is available for iOS and Android devices.
How do I connect my phone to my Smonet?
To connect your phone to your Smonet, you first need to set up and configure your Smonet system. This will involve connecting the Smonet base unit and network cable to your router, downloading the Smonet app to your smartphone, and registering your Smonet account.
Once your Smonet system is up and running and your Smonet account is registered, you can easily connect your phone to it by following these steps:
1. Open the Smonet app on your smartphone and sign into your Smonet account.
2. Select the “+” icon in the top right corner
3. Select “Connect to a Device”
4. Choose the Smonet base unit from the list of available devices, and tap “Connect”
5. On the next screen, enter your Smonet account password and tap “Next”
6. Your phone is now connected to your Smonet system!
You can now enjoy the features and benefits of your Smonet system and use your phone to access and control your home security system.
What is the default password for a Smonet camera?
The default password for a Smonet camera will vary depending on the model you have. All Smonet cameras come with a default password that can be located on the quick guide that is included in the packaging.
For example, the default password for the Smonet 4CH 1080P HD NVR Security Camera System is “admin”. This is the same default password for all Smonet camera models. It is highly recommended that you change the default password to a stronger one for added security.
How do I put my Smonet lock in pairing mode?
To put your Smonet lock into pairing mode, first locate the small reset button on the back or underside of the lock. It is a small circular button, often with an orange center. It will likely be labeled as a “reset” button.
Using something blunt, like a paperclip or pencil, press and hold the reset button for about five seconds. When the lock beeps and a small green light begins blinking on the front, you will know that it is in pairing mode.
You can now activate the pairing process by using the instructions provided with your lock.
If you are still having difficulty putting your Smonet lock into pairing mode, you can also contact Smonet’s customer service department for further guidance. They will be able to provide you with step-by-step instructions for pairing your lock.
How do you reset a Smonet camera?
To reset a Smonet camera, you will need to first power off the camera by unplugging the power adapter. Next, you will need to take off the cover by pressing the reset button and turning the cover counterclockwise.
After that, you will need to plug the power adapter back in and turn the camera back on. On the main page, you will need to press on the gear icon, which is located on the bottom right. From there, you will find a Reset option and you will need to press it with the camera still turned on.
This should reset the Smonet camera back to its original settings.
Why does my wi-fi say connected no Internet?
When your Wi-Fi says “connected no Internet”, it means that your device is connected to a Wi-Fi network, but it cannot access the Internet. This typically happens when there is an issue with your router, modem, or Internet connection.
The issue could also be due to network congestion from too many users connected at once or your Wi-Fi signal not reaching the device at full strength. To troubleshoot this issue, you should try the following steps:
1. Check your cables: Ensure that your router, modem, and any other devices are securely connected and the cables are not loose.
2. Contact your ISP: Contact your Internet Service Provider to make sure that your service is online and not experiencing any disruptions or connection failures.
3. Reset your router: Resetting your router or modem can help refresh your connection and usually fixes most issues.
4. Reboot your device: Try rebooting your device to see if that helps with the connection issue.
5. Check for updates: Ensure that your router, modem, and device are running on the latest version of the operating system.
6. Move your device closer to the router: You may have a weak Wi-Fi signal if your device is located in a faraway part of your home. Moving your device closer to the router can help improve the signal.
Finally, if none of these steps work, you may need to purchase a new router or modem. If you suspect that the problem lies with your ISP, you should contact them and they should be able to help you fix the issue.
How do I manually add a WiFi network to my phone?
Adding a WiFi network to your phone manually can be a quick and easy process. Here are the steps you should take if you wish to manually add a WiFi network to your phone:
1. Go to your phone’s Settings.
2. Once in the Settings, look for the option that says Wi-Fi, Network, or Wireless.
3. Once you tap on WiFi, you will be taken to a list of available networks.
4. Tap on the “Add network” option at the bottom of the list.
5. Enter the information of the network you wish to connect to, including the network name, security type, and the password.
6. Once the information is saved, you’ll be given an option to connect to the WiFi network.
7. Tap on the “Connect” option and you should now be connected to the WiFi network.
How do I connect to a wireless router without a password?
If you want to connect to a wireless router without a password, you will need to make sure that the router is not secured by a password or encryption. Many routers come with password protection enabled by default.
If you haven’t configured any type of security on your router, then it will be wide open and you can connect to it without a password.
In order to connect to an unsecured router, you will need to use a computer or device with a wireless network adapter. Most laptops and tablets come with a built-in wireless adapter, but some desktop computers may need to have one installed in order to connect to a wireless network.
Once you have a wireless adapter installed, you will then need to locate the unsecured router and connect to it.
Depending on the type of device you are using, the process for connecting to the router might be slightly different. For example, if you are using a Windows-based computer, you can follow these steps: Go to the Start menu and select ‘Control Panel’.
Then, select ‘Network and Sharing Center’ and select ‘Set up a new connection or network’. Select ‘Manually connect to a wireless network’ and enter the name of the unsecured router in the ‘Network name’ field.
Leave the ‘Security type’ and ‘Security key’ fields blank and select ‘Connect’.
After a few moments, the connection should be established and you should be able to access the internet. If you encounter any problems while connecting to the router, you can refer to your router’s manual or contact your internet service provider for more detailed instructions.
Why is my tablet not picking up WiFi?
There could be a few different reasons why your tablet is not picking up WiFi. Some of the most common causes include low signal strength, a misconfigured network, and a faulty router.
Low signal strength is the most common cause of a device not connecting to a network. If you are in an area with a weak signal, the device may struggle to detect the network. You can check the strength of the signal by viewing the available networks on your tablet, or a phone or laptop.
If the signal level is low, try moving to a different area with a stronger connection.
A misconfigured network is another potential cause of difficulty connecting to WiFi. If the settings on the router are incorrect, the device may struggle to connect. Check the router’s settings to ensure they match the network settings you are trying to connect to.
You may need to do a factory reset or contact your internet service provider to help fix this issue.
Finally, a faulty router may be the cause of the issue. If the router is not functioning properly, it may not be able to broadcast a signal for the device to connect to. In this case, it is best to contact your internet service provider for assistance.
In summary, the most common reasons why your tablet is not picking up WiFi are low signal strength, a misconfigured network, and a faulty router. To troubleshoot this issue, check the signal strength and network settings, and if needed contact your internet service provider.