Building a recessed shelf is a project that requires a bit of precision, but isn’t overly complicated. Before beginning you’ll need to make sure you have all of the necessary materials and tools. You’ll need a stud finder to find the studs in the wall, a level, a saw, measuring tape, wood that is the same thickness as the wall, framing nails, and a nail gun.
After you have those items you can begin construction.
Step 1: Take Measurements- To build a recessed shelf you have to have an accurate measurement of the wall. Start by measuring the height, width, and depth of the shelf you’d like and use your stud finder to mark the studs in the wall.
Step 2: Cut the Wood- You’ll need to cut the wood to the same thickness as the wall and use that to frame out the recessed shelf. The frame should fit within the studs in the wall. If you’re needing more than one shelf, make sure to use the level to ensure that your frames are perpendicular.
Step 3: Attach the Frame- Once you have the frame cut you can begin to attach it to the wall. Make sure to use a nail gun to secure the frame and make sure each nail is level and secure.
Step 4: Install the Shelf- Once the frame is secure you’ll be able to install the shelf you want in the frame. Depending on the material you’re using you may need to secure it with screws or just rest it on top of the frame.
Step 5: Finish- After you’ve secured the shelf in the frame, you can finish the shelf by caulk or paint. Then you’re all done and you have a beautiful custom recessed shelf!
How deep can recessed shelves be?
The depth of recessed shelves can vary depending on the size you are looking for and where it will be installed. For example, kitchen cabinets often have shelves between 11-14 inches deep, while under a staircase usually have 7-9 inches of clearance.
When you measure for recessed shelving, you will also need to account for any overhang from the counter or surrounding structures. For wall-mounted shelving, the minimum depth should be 6-7 inches; however, 10-12 inches is recommended for a more secure fit.
It is important to ensure the shelves are not too deep as this can cause them to protrude into a wall, interfere with other fixtures, and cause instability. Additionally, if the shelves are attached to a wall, it is important to use the appropriate anchors to ensure they are secure and will not come loose later down the line.
How do I make recessed bathroom shelves?
Creating recessed bathroom shelves is a great way to add additional storage space and style to your bathroom. Here are the steps to help you make your own recessed shelves.
1. Prep the Walls: The first step is to prepare the walls. You’ll need to make sure the walls are free of any protrusions and that they are sound and solid enough to accommodate the shelf. You can do this by giving the walls a light sanding with a sanding block and filling any indents and holes with spackling paste.
2. Mark the Measurements: Once the walls are prepped, you’ll want to mark the measurements for the shelf. Depending on the area of your wall, you can either make one large shelf or two separate ones.
In any case, use a pencil to measure and mark the sides, the top, and the bottom of the shelf you want to create.
3. Cut the Shelf: Using your measurements as a guide, you can then use a jigsaw to cut the shelf from a piece of wood. Depending on the look you’re going for, you can choose a wood that matches the design of your bathroom.
4. Install the Shelf: Once you’ve cut the shelf, you can then use an adhesive sealant to attach it to the wall. Make sure to press the adhesive sealant firmly against the wall and then attach the shelf over it.
After it’s done, use a level to make sure the shelf is even.
5. Add Finishing Touches: Finally, you can add the finishing touches to make your shelf look complete. You can add nails, knobs, and even paint the shelf to make it look amazing.
And that’s it! Creating your own recessed bathroom shelves is a great way to add style and storage to your bathroom. Just make sure to measure accurately, use the proper tools, and follow these steps and you’ll have your own custom recessed shelves in no time.
How do you make a shower niche shelf?
Making a shower niche shelf is a great way to add a unique, modern twist to your bathroom. Here’s a step-by-step guide to help you through the process:
1. Start by measuring the size of the niche space in your shower, including the measurements from all four sides of the area, so you know what size shelf to buy or build.
2. You can either buy a ready-made shelf that fits your niche size, or build one using wood like pine, oak, or even cedar.
3. Cut the wood to size, using a saw or power saw and a measuring tape. When cutting, make sure to wear safety gear like glasses and gloves.
4. Sand the edges of the wood to make them even and smooth.
5. To further customize the shelf, consider staining or painting it. Once the paint is dry, apply at least one coat of sealant.
6. Place the shelf in the niche, making sure it lines up correctly, and nail it into the wall. You can also use wall anchors and screws for extra stability.
7. If desired, you can add decorative accents like tile, trim, or crown molding to give it a more customized look.
And there you have it – your very own DIY shower niche shelf!
What can I use for a niche shelf?
One great option for a niche shelf is a floating shelf. Floating shelves are incredibly versatile, and they don’t require any major remodeling or construction work. You can install them easily, and they look great in any room of your home.
Not to mention, they come in a variety of styles and finishes, so you can find one that perfectly fits your space. They’re perfect for displaying pictures, knick-knacks, and any other decor items you may want to show off.
Plus, if space is really tight, you can buy a foldable shelf, so you can store it when it’s not in use. You can even find ones that perfectly fit into corners, so you can get even more storage out of small wall niches.
Overall, floating shelves are an excellent option for anyone looking to add extra storage and style to a niche.
What can I use instead of a shower niche?
If you are looking for a way to store and organize items in your bathroom without using a shower niche, there are several alternatives available. Popular options include installing wall shelves, placing freestanding shelves in the corner of the shower, or adding a storage tower.
Wall shelves can be built-in or hanging and provide extra space for bathroom necessities. Freestanding shelves are available in a variety of sizes, colors and styles and can easily be moved to the corner of the shower to save space.
Storage towers are also great for organizing items and utilize the vertical space of the shower or bathroom. If you don’t like the idea of shelves, you could also incorporate a cabinet with doors, which will give you concealed storage and make the space look sleek and organized.
Additionally, depending on the configuration of your bathroom, you could also try hanging baskets in the shower to add some extra storage without taking up too much floor space.
Are shower niches worth it?
Shower niches, which are dedicated shelves built right into the shower wall, can be a great addition to any bathroom. Not only do they add an attractive design element to the space, they are also incredibly convenient and functional.
Shower niches allow you to easily store all your shower essentials such as shampoo, conditioner, body wash, and more. This eliminates the need to cluttering the shower floor with bottles and messy containers, providing a much more organized and accessible way to store your items.
You’ll be able to keep your cleaning supplies and toiletries all in one place, reducing the time you would have otherwise spent searching for items. Not to mention, if your shower does not have glass doors, shower niches can help to protect items from water damage.
In addition to functionality, shower niches can provide an aesthetically appealing design element. They can be used to break up large expanses of tile, create visual interest, and bring dimension to the shower.
With the vast array of materials, colors and sizes available for niches, you are sure to find the best option to suit your design needs.
Overall, shower niches are definitely worth considering if you are looking to add more storage options to your shower and give it a style update. They offer great convenience and visual appeal, making it a great addition to any bathroom.
How much does it cost to recess a wall?
The cost to recess a wall will vary depending on the type of wall it is, the size of the recess being created, the materials being used, and the amount of labor required. Generally, the cost to recess an interior wall in a residential home can range from around $700 to $2,000, although it could be lower or higher depending on the specifics of the project.
Some factors that may alter the cost include the type of materials used (such as drywall, wood, or metal), the size and complexity of the recess, and the amount of labor involved (including demolition, material preparation and installation, finishing, and cleanup).
If any electrical or plumbing work is needed, that can also add to the cost. Therefore, it is best to obtain cost estimates from a contractor before beginning the project to get an idea of what the total cost will be.
How do you frame a wall with a niche?
Framing a wall with a niche is a fairly straightforward process that can be accomplished with basic carpentry skills, some simple tools, and a few materials.
Step 1: Calculate the dimensions of the niche and surrounding wall. Make sure that there is adequate space for the intended purpose of the niche.
Step 2: Build a sturdy rough frame using 2-inch by 4-inch boards. Fasten the boards together with nails or screws and make sure that the frame is both level and vertical. If you are planning on attaching anything such as shelves or a back panel, consider adding supports to the frame.
Step 3: Measure and then cut out the hole for the niche. You may want to use a jigsaw for this step.
Step 4: Cut a two-by-four board to fit the upper portion of the wall around the niche. Fasten it to the frame and make sure that it is completely level.
Step 5: Cover the frame with drywall and use joint compound to fuse the seams together. Allow the compound to dry completely before moving on to the next step.
Step 6: Apply plaster to the dry wall and allow it to dry as well.
Step 7: If desired, you can cover the niche with tile to give it a finished look.
Step 8: Add accent pieces, such as decorative trim and crown molding, to the wall.
You now have a fully framed wall with a beautiful and stylish niche. Congratulations!
How deep is a wall recess?
The depth of a wall recess can vary greatly depending on the size of the wall and the purpose of the recess. Generally speaking, wall recesses are typically made between 3 and 18 inches in depth, but deeper recesses can be created depending on the requirements of the space and the size of the wall itself.
If the recess is meant to be used as a utility box or storage shelf, then it is likely to be around 6-8 inches in depth. If the purpose of the recess is to create structure or accent the design of the room, then deeper recesses can be created for a more dramatic effect.
The layout of the space and the design preferences of the homeowner should be taken into consideration when determining the exact depth of the wall recess.
How do you make an alcove wall?
Making an alcove wall can be a rewarding project if you have all the necessary materials and tools. Before starting your project, check local building codes to determine which materials are suitable for your needs.
The first step is to frame the alcove wall. Use studs that are the same size as the rest of the existing wall and space them consistent with surrounding walls. You may need to use a saw or other tool to cut any studs too long for the alcove.
Secure the studs in place using nails or screws.
The next step is to install the drywall. Measure each side of the alcove to make sure the drywall fits correctly. Adhere the pieces using drywall nails or screws. Make sure all the seams are sealed with drywall tape and covered with joint compound.
Then, sand the surface of the drywall to create a smooth finish.
Finally, you can decorate the alcove wall. Paint, wallpaper, or tile are all good options for the surface of the wall. Additionally, you can add artwork, shelves, or other decorative accents to complete the look.
With the right tools, materials, and some careful planning, making an alcove wall can be an easy, rewarding project.
What do you call a wall recess?
A wall recess is a shallow indentation in a wall, usually affording space for a fireplace or cabinet. Recesses can be created in any number of ways, including cutting out a section of the wall, making a protruding section of wall, or adding a structural element to support the recessed feature.
Wall recesses have the added benefit of adding an architectural element to the space, allowing for the introduction of texture and design features. Additionally, wall recesses create the illusion of more space, making the room feel larger and allowing for the placement of larger furniture items.
What is wall niche?
A wall niche is an alcove or recess in a wall that is typically used to add visual appeal to a space. It is commonly used to store artwork, books, or decorative objects. Wall niches can be incorporated into a room’s design to add depth and dimension to a wall surface.
These features can range in size depending on the space they occupy and can be custom-made to fit any room. Wall niches are often used in the main living or entertaining area of the home to add character, provide additional storage space, or set off a featured item, such as a piece of artwork or a TV.
Wall niches can also be used as a design element in a bathroom, where they can be used to store toiletries or extra shampoo and soap containers. With a variety of colors and finishes available, wall niches are becoming increasingly popular for use in homes of all sizes.
How do you build a partition wall in a finished room?
Building a partition wall in a finished room requires careful planning and attention to detail. The first step is to measure the room to ensure that you have the exact dimensions for the wall. After the measurement is complete, you will need to decide on the type of wall (e. g.
solid, drywall, framed). Once you have made the decision, the next step is to purchase the necessary materials and tools. These include the appropriate studs, drywall, screws, sealant, nails, and other hardware.
The next step is to prepare the area where the wall will be constructed. This includes removing any existing wall hangings and furniture from the area, as well as checking framing and plumbing work. This step is essential for the successful installation of the wall partition.
Once the area is ready, fix the studs to the wall. This can be done by attaching them directly to the walls with screws if the wall is solid, or with nails if the wall is framed.
Then attach the drywall to the studs using screws. Make sure to use the appropriate screw type for the wall type you have chosen. After the drywall is up, you need to seal and cover all the joints. This is done with either joint compound or painter’s caulk.
Finally, attach the mouldings and other decorative elements to complete the wall partition. Once your partition wall is finished, you will need to attach any necessary hooks and shelving. After that, your partition wall is complete, and you will have successfully divided your finished room into two distinct areas.
What is a recessed shelf in a shower called?
A recessed shelf in a shower is typically referred to as a shower niche. Shower niches are designed to provide a convenient storage area located within a shower or wet room. They provide dedicated space to store shower products, including toiletries, cleaning supplies, or any other items that are used in the shower and bath space.
Shower niches can be constructed from a variety of materials, including tile, natural stone, quartz, or engineered stone. Many shower niches are waterproofed with the help of cement backing boards and waterproof membranes.
These protective membranes help prevent moisture from seeping into the wall cavities beneath the niche and causing potential mold and mildew growth.
What is the shower cubby called?
The shower cubby is typically referred to as a shower niche. It is an essential element of a shower. It provides storage for a variety of items such as shampoo, soap, and other shower accessories. It is usually built into the shower and typically sits between the wall and the showerhead.
It is usually recessed in the shower wall and can be both functional and aesthetically pleasing. Some of the most common materials used to make a shower niche are tile, stone, and fiberglass. They come in various sizes and shapes and can be customized to fit the needs of the individual.
What is a niche in a bathroom?
A niche in a bathroom is a storage area or built-in shelf that is often recessed into the wall. It can be used to store towels and other bathroom necessities, giving the bathroom a neat and organized look.
Niches are a great way to make use of the extra space in a bathroom and can be customized however you’d like with curvatures and ridges to create an aesthetically pleasing look. They are usually found around the tub or shower for convenience, but can also be located in other areas of the bathroom.
The best part about a niche is that it can be built with materials such as tile, concrete, or even wood- giving you the freedom to upgrade your bathroom to any style or aesthetic.
How do you recess a shelf in a shower?
Recessing a shelf into a shower requires a few tools and supplies and a bit of know-how. Before you begin, make sure to measure twice and cut once.
First, prepare the shower wall for installation by taping off the area around the shelf using painter’s tape. Next, mark the outline of the shelf on the wall using a pencil. To prepare the wall for the shelf, you will need to use a hammer and chisel to create a recessed shelf area in the wall.
Carefully chip away at the surface of the wall, working from the outside edge of the shelf outline inwards. This will create a shelf alcove that is flush with the shower wall.
Once finished, you can then use a small sponge or cloth to wipe away any dust or debris from the area. Then, use a waterproof sealant to the edges of the shelf alcove to create a waterproof seal. Allow the sealant to dry before moving to the next step.
Next, install the shelf by popping it into the alcove. Make sure it is flush with the shower wall before securing it in place. To secure it, you can use plastic wall anchors and screws to keep it in place.
To finish, apply a grout to the edges of the shelf to create a watertight seal. Then, let the grout dry before using the shelf.
Where is the shower recess?
The shower recess is typically located in the bathroom, along one wall near the corner or in the middle of the room. Generally, the shower recess is designed to be waterproof and tiled to match surrounding walls and the floor.
Depending on the bathroom design, the recess may be part of the shower cubicle or free standing. The recess may also feature shelves and recessed lighting, specific to the design. The shower recess should also be equipped with a showerhead, adjustable temperature control and water pressure regulation device.
Additionally, the shower floor should be textured for safety and also be slip-resistant.
