For performing a German light smear, you first need to collect a sample of material such as blood, sputum, or stool. Once the sample has been collected, spread it on a glass microscope slide in a thin layer.
It is important to note that the material should not be too thick, as that can interfere with the ability to adequately assess the sample. Once the sample has been spread on the slide, it should be allowed to air dry for approximately 10-15 minutes.
After the sample has dried, it should be fixed to the slide. This is typically done by flooding the sample with methanol for 1-2 minutes. Then, rinse the slide with distilled water and dry it with a tissue.
The next step is to stain the sample. There are multiple types of stains used for a German light smear. The most common are Wright-Giemsa or Diff-Quik. Wright-Giemsa is a mixture of methylene blue, eosin, andazanine, and orange G.
Diff-Quik is a one-step staining technique that utilizes carriochrome and a diluent.
The dye should be added to the slide gently and allowed to sit for around 10 minutes. Once the stain has been applied, the slide should be rinsed gently with distilled water and allowed to air dry. After this, the slide should be examined under the microscope and assessed.
Overall, the process for performing a German light smear includes collecting and spreading a sample material on a slide, allowing it to air dry, fixing it with methanol, and staining it with a choice of dye.
After the dye has been applied, the sample should be rinsed with distilled water and air-dried before viewing with a microscope.
What product do you use for German schmear?
German schmear is a popular decorative technique used on brick and stone surfaces. It is also known as a German smear, tuck pointing, or whitewash. It involves applying a leveling mortar and then wiping off the excess to leave the brick or stone surfaces with a dramatic, layered look.
The best product to use for German schmear is a high-quality, light-colored masonry cement. Masonry cement is made specifically for masonry projects and contains a combination of sand and cement particles, an acrylic fortifier, and various mineral ingredients.
It produces a stronger, long-lasting bond than a regular mortar mix.
To apply German schmear, first clean and moisten the surface to be worked on. Then, spread a thin layer of the masonry cement onto the brick or stone. Finally, use a damp sponge to wipe away the excess, leaving behind a unique, layered look.
It’s important to allow the masonry cement to dry completely between layers.
Once the desired appearance is achieved, it’s important to seal the brick or stone with a specialized water-repellent sealer. This helps with durability and will help prevent dirt and grime from becoming embedded in the mortar.
How long does German Schmear take to dry?
Typically, German Schmear takes around 24 hours to dry completely. This drying time can be affected by the climate, so it is important to check the application instructions for the specific product being used.
During the drying process, it is important to monitor the surface in case of any excess moisture or runoff. In addition, you should avoid touching the application until it has completely dried.
What’s the difference between whitewash and German smear?
Whitewash and German smear are two different methods of applying mortar to brick, stone, or concrete masonry. Whitewash is a process of mixing white lime and water to create a plaster-like finish, which is then applied to walls, ceilings, and other surfaces.
This finish is typically used in outdoor locations such as barns, sheds, and garages, where protection from the elements is desired. German Smear is similar to whitewash in that it involves applying a layer of wet mortar.
However, instead of using an even coat, German Smear is applied in an uneven coat with a brush. This technique gives the wall or surface a “smearing” effect. This look is traditional and often found on older buildings and homes.
German Smear is becoming increasingly popular with homeowners and is most commonly used for interior walls and fireplaces. It should be noted that German Smear can be more difficult to work with than whitewash and requires some practice to achieve an even and professional finish.
Is German Schmear timeless?
Yes, German Schmear is a timeless classic. It has been around for centuries and is still enjoyed today. It is a traditional spread commonly used in Central and Eastern European countries to top breads, pastries, and other baked goods.
It is a simple yet versatile spread composed of soft cheese and herbs or spices. Many variations are used in different regions with variations of ingredients, such as cream cheese, butter, sour cream, chives, dill, horseradish, nutmeg, garlic, and parsley.
Due to its ability to pair with many different flavors, German Schmear is considered timeless and continues to remain a popular topping for many dishes.
Which is easier limewash or German smear?
The answer to which material is easier to apply, limewash or German smear, depends on personal preference. Limewash is a traditional lime and water mixture that creates a wash with a matte finish. It does not require any sanding beforehand and is an inexpensive solution to transforming stone, masonary, or brick.
German Smear is a more labor-intensive plaster and masonry technique with a more textured finish. Pre-sanding of the surface is necessary and the application requires several layers of limewash with mortar.
Each layer must be left to partially set before the next layer is applied.
Ultimately, both limewash and German Smear can be used to create beautiful effects on stonework, masonry, or brick, but it really depends on what the homeowner is looking for and their skill level. Some prefer a more subtle effect with the matte look of limewash while others prefer the texture and depth of a German smear.
The choice is yours.
What is white washed brick called?
White washed brick can be referred to as “whitewashed brick”, “lime-washed brick” or “pickled brick”. This describes the process of treating brick with a slurry of white pigment, water and a binder, sometimes with the addition of lime, which gives the brick a bright, white finish.
Whitewashing brick can be done as a DIY project with a few simple steps. First, use a pressure washer to remove any dirt, discoloration and mildew from the brick. Next, prepare the whitewash solution by adding white latex paint and water.
Depending on the desired effect, the ratio of paint and water will vary. If a thicker or heavier coverage of whitewash is desired, increase the ratio of paint to water. Once the solution is thoroughly mixed, apply it to the brick using a long-bristled brush.
Allow the whitewash to dry and then apply a second and third coat if desired. For added protection, seal with a clear sealant. With these simple steps, you can have beautiful, white washed brick in no time.
Is limewash the same as German smear?
No, limewash and German smear are not the same thing. Limewash is a mixture of slaked lime and water that is used to create a whitewashed look on the exterior of a home. German smear is also known as Schmear and is a way of applying mortar over a masonry wall to create an aged, rustic look.
German smear is made from a mixture of mortar, sand, and lime, and is applied in layers by a mason or homeowner. While both techniques produce a white look, the effect of a German smear is more varied than that of a limewash.
Limewash can be applied unevenly, making some areas brighter or darker, whereas the layers of German smear can create an interesting, slightly irregular texture and look.
How much does it cost to lime wash a house?
The cost to lime wash a house depends on a variety of factors, including the size of the project, the complexity of the design, the number of required coats, and the type of paint used. Typically, a large-scale lime washing project can range anywhere from $2,000 – $5,000.
However, if the size of the project is relatively small and the design is simple, the project could cost as little as $300 – $600. On the other end of the spectrum, complex designs with multiple coats will likely require significantly higher costs, up to $8,000 and higher.
In addition to the cost of paint and materials, you may be required to pay a flat rate to the painter or contractor for their services. This rate can typically range anywhere from $50 – $100 per hour and may vary depending on the contractor’s experience.
It is important to remember to factor these costs into the total price when evaluating the cost of a lime washing project.
Should I whitewash or limewash?
The decision of whether to use whitewash or limewash on your project will depend on the desired outcome, as they each have their own advantages and disadvantages. Whitewash is a traditional option that provides an opaque, consistent coverage which can be easily applied and offers a beautiful wash over existing surfaces.
It is also both economical and weather-resistant. Limewash, on the other hand, is softer and offers a slightly more translucent, textured finish with slight variation in the tone, resulting in a more naturally aged and individualized look.
While it is more expensive compared to whitewash, limewash is also more breathable, allowing moisture to escape, so it is ideal for areas where condensation tends to form. So, it’s important to weigh the pros and cons of both options and decide which one is the best fit for your project.
What is German Schmear made of?
German Schmear is a type of spread or topping used in German cuisine. It is typically made from a combination of butter or margarine, sour cream, onions, garlic and seasonings. The butter or margarine is usually softened to make it easier to mix with the other ingredients, and the result is a creamy, flavorful spread.
It is often used as a topping for breads and crackers, or served with meats and vegetables. Some German chefs like to add herbs or spices to the recipe for additional flavor. German Schmear can also be used as a dip or served over potatoes or other dishes.
Can I use thinset mortar for German schmear?
Yes, you can use thinset mortar for German schmear. Thinset mortar is an appropriate material to use for this application as it is relatively easy and inexpensive to apply and provides a solid base for the brick.
Additionally, thinset mortar has proven to be very durable and is waterproof, making it a great choice for outdoor applications. It is also possible to tint thinset mortar with paint or concrete tinting dye to coordinate with the look of your brick, creating a seamless look.
What is modified thinset used for?
Modified thinset is a type of mortar used as an adhesive for installing tiles, usually ceramic or stone. It is made of a blend of cement, sand, and additives that make it flexible, water-resistant, and durable.
Modified thinset is a versatile adhesive that can be used in bathrooms, kitchens, showers, pools, walls, and floors. It’s used for adhering tiles to substrates such as cement, concrete, drywall, backer board, and even existing tile.
It’s also the preferred adhesive for setting glass and mosaic tiles. In addition to its adhesive properties, modified thinset can act as a grout when used in conjunction with tiles laid in sheets. Unlike traditional sand and cement mixes, modified thinset is ready to use and doesn’t require on-site mixing.
For best results, its recommended to use an appropiate modified thinset for the job, with its strength being determined by the square footage and type of tile being laid.
How do I know if my Thinset is modified or unmodified?
To determine whether your thinset is modified or unmodified, you will need to check the label on the product packaging. Modified thinsets usually contain latex or acrylic agents, which provide superior bonding and flexibility compared to traditional thinsets.
Unmodified thinsets are typically composed of standard materials such as Portland cement, sand, and water. They provide a traditional, more permanent bond. Unmodified thinsets are lighter in weight than their modified counterparts, making them ideal for lighter projects such as indoor tiling jobs.
Modified thinsets, on the other hand, are heavier and more durable, making them suitable for heavier, outdoor projects. Additionally, unmodified thinsets often require a few days to fully dry, while modified thinsets can cure in only a few hours.
If the label does not specify whether the thinset is modified or unmodified, you should contact the manufacturer for more information.
