The first and most effective is to use a rubber mallet. Gently tap the socket head with the mallet until it is loosened and is able to be removed from the plastic. Another option is to use a flat head screwdriver and gently pry the socket off the plastic.
Depending on the type of plastic, this method may not be as safe or effective as the mallet. Additionally, if you have a Harbor Freight drill, you can use it to carefully remove the socket from the plastic by drilling a small hole in the center of the head, then slowly pulling the socket out of the hole.
When attempting to remove plastic-embedded sockets, it is absolutely essential to have patience and use extreme caution to avoid damaging the plastic or the socket.
How do I remove ratchet from harbor freight packaging?
The best way to remove ratchet from harbor freight packaging is to use a pair of scissors or a sharp knife – be careful not to hurt yourself! Start by cutting away at the plastic around the ratchet until you are able to access the ratchet itself.
Next, use a flat-head screwdriver to carefully pry the ratchet from its packaging. If necessary, use a rubber mallet to loosen the ratchet from the packaging. Remove the ratchet from the packaging and dispose of the packaging materials in the trash.
Make sure to clean the ratchet once it is out of the packaging and store it in a safe place.
How do you get the duralast socket out of packaging?
The best way to get the duralast socket out of the packaging is to use a pair of scissors or a utility knife to carefully cut away the packaging. While cutting away the packaging, be sure to avoid cutting yourself or cutting or damaging the socket itself.
When cutting away the packaging, you should also avoid using tools such as pliers or hammers that could potentially damage the socket itself. Once you have removed the packaging, you should be able to carefully remove the socket from the packaging.
How do you get a bit out of a socket?
Getting a bit out of a socket involves removing the retaining screws from the backplate and disconnecting the power supply cables that are connected to the socket. Then, use a screwdriver to loosen the captive screws, which will allow you to lift out the bit that is inside the socket.
If desired, use a bit extractor tool to carefully remove the bit. Once the bit is out, recap the socket with the retaining screws, and reconnect the power supply cables to the socket. Finally, turn the power on and check to make sure the bit is secure before using the socket.
How do you open a socket set?
Opening a socket set typically requires a ratchet or wrench for handle and the correct size socket for the nut or bolt. Before attaching a socket to a ratchet, it’s important to check the size stamping on the socket is correct for the relevant nut or bolt.
Ensure the handle is firmly clamped when a socket is attached, using the retaining plate or clip if provided. When loosening or tightening a nut or bolt, pointing the handle away from your body helps you keep control of the ratchet.
As the nut or bolt comes loose, visually assess it to ensure it can be handled safely. It may be necessary to use an extension bar to access hard to reach places, or a universal joint to access angled surfaces.
To avoid damage to the socket, turn the ratchet away from the nut or bolt at the end of a turn to reset the ratchet action. Once the job is complete, the socket set should be stored in a clean and dry environment away from moisture and dust.
How do you use a Craftsman wrench?
Using a Craftsman wrench is a simple task. First, select the wrench that has the right size and shape for the job. If you are unsure which to choose, refer to the size markings on the wrench head. Look for the nut or bolt that you need to turn, then place the wrench head on to it.
Often you will need to hold the nut or bolt in place in order to turn it. Once in place, rotate the wrench handle in the appropriate direction. A right-handed wrench will turn clockwise to tighten, and counterclockwise to loosen.
Depending on the size of the nut or bolt, you may need to use both hands to turn the wrench. Repeat the process of rotating the wrench until the nut or bolt has been appropriately tightened or loosened.
Finally, safely store your wrench away for future use.
Where does the spring go in a ratchet?
The spring in a ratchet usually goes inside the ratchet body, at the base of the ratchet head. The spring applies tension to the pawl mechanism inside the ratchet, which allows the ratchet to switch between forward and reverse motion.
The exact placement of the spring varies by ratchet model; however, it is typically housed in a separate chamber of the ratchet body near the base of the ratchet head. If accessing the spring requires opening the ratchet body, it is important to exercise extreme caution and be aware of any possible loose parts or extraneous material inside the ratchet.
It is also important to ensure that the spring is properly replaced and seated back inside the ratchet body before use to ensure the ratchet functions properly.
Are Craftsman socket sets made in USA?
Yes, Craftsman socket sets are made in the United States. While Craftsman is now owned by Stanley Black & Decker, it still operates its production facility in the U. S. , so many of its power tools are still manufactured domestically.
Specifically, Craftsman manufactures its mechanics’ hand tools, such as socket sets, at its plant in San Diego, California. In addition to socket sets, Craftsman’s hand tools include wrenches, screwdrivers, nutdrivers, pliers, adjustable wrenches, and ratchets, all of which are made in the USA.
Who owns Craftsman now?
The Craftsman brand is now owned by Stanley Black & Decker, a leading global provider of professional tools and solutions. In 2017, Stanley Black & Decker acquired Craftsman from Ace Hardware for an estimated $900 million.
Craftsman is now part of a portfolio of over 25 brands, including Black & Decker and DeWalt, that Stanley Black & Decker provides to professional tradespeople and do-it-yourself consumers worldwide. The company markets Craftsman tools under both the Craftsman and Craftsman Professional labels, as well as its line of Craftsman mechanical and industrial tools.
With a legacy of more than 90 years of quality, innovation and durability, Craftsman is well-known and trusted among consumers and professionals.
What happened Craftsman?
In 2018, Craftsman, the iconic American tool brand founded in 1927, was sold to Stanley Black & Decker, Inc. by its then-owner, Sears Holdings. Prior to the sale, Craftsman was one of the leading tool brands in the United States, and was well-known for its wide selection of quality, relatively affordable tools.
Since the sale to Stanley Black & Decker, Craftsman has retained its name and iconic blue and red color scheme, and many of its products and stores remain in business, but with some changes.
The primary change for Craftsman as a result of this sale is that its tool products are now manufactured and distributed by Stanley Black & Decker, instead of by Sears. While many of the original Craftsman products remain available, Craftsman now also offers many.
Stanley Black & Decker-made products. These products are designed in the same spirit as traditional Craftsman tools, with the same high standards of quality and durability. Furthermore, Craftsman products are now available at various retailers in addition to Sears, including Lowe’s, Amazon, and Ace Hardware.
Overall, Craftsman remains a trusted, reliable name in the tool business, just as it has always been, and may be in a better position to thrive with its new ownership by Stanley Black & Decker.
What happened to Craftsman Professional tools?
Craftsman Professional tools are marketed as heavy-duty tools designed to provide high performance and reliability in professional grade applications. Craftsman was initially owned by Sears, and after the company’s bankruptcy in 2018, the tool brand was purchased by Stanley Black & Decker in early 2020.
The Craftsman Professional line still exists and is sold through numerous retailers, including Lowe’s, Amazon and other hardware stores. The Craftsman Professional tools continue to be the go-to tool for many professional tradesmen and DIYers alike, as they are made from high quality materials and are backed by a solid warranty to guarantee reliable performance.
Although the new line of Craftsman Professional tools are now made and sold by Stanley Black & Decker, the company still adheres to the commitment to CRAFTSMAN quality that was instilled by the former owners.
Is Snap On still made in the USA?
Yes, Snap On is still made in the USA. As a result of their commitment to American manufacturing, Snap On has 16 factories throughout the United States which are responsible for producing their tools, as well as a number of other production and distribution facilities.
Snap On also has five research and development centers located in the United States, where the company puts an emphasis on bringing new tools to the workshop in an effort to improve the trade. Snap On also ensures that its tools are made with the same quality and precision that its customers expect.
As a result, all tools manufactured by the company are guaranteed to be of the highest possible standards.
Did Harbor Freight buy Snap-On Tools?
No, Harbor Freight did not buy Snap-On Tools. Harbor Freight is a retailer of tools, automotive, and other home improvement items, while Snap-On is a global leader in the design, manufacture, and marketing of professional tools and equipment.
Founded in 1920, Snap-on is one of the oldest and most established tool companies in the world. The two companies do not have any formal connection and are competitors in the tool market. However, Harbor Freight does offer a large selection of Snap-On Tools, including adapters, punches, screwdrivers, pliers, ratchets, wrenches, combination sets, and tool sets.
Is Blue Point made in USA?
Yes, Blue Point is an American brewery, primarily located in Patchogue, New York on Long Island. The company, which was founded in 1998, is currently owned by Anheuser-Busch InBev and distributed primarily throughout the United States.
According to its website, Blue Point has a catalog of more than 40 different craft beers, many of which are brewed with all-natural ingredients and are certified as Kosher. The brewery also brews exclusive seasonal beers, such as its popular Toasted Lager for summer and Summer Ale for winter.
In addition, Blue Point produces a variety of award-winning limited-edition reserve beers – sometimes referred to as “cellar beers” – and offers a variety of special releases sourced from its nearby laboratory and tasting room.
