Hanging curtain rods on a window close to the wall is surprisingly easy! To start, you’ll need to measure the distance from the wall to the window, or the width of the window, plus whatever space you’d like between the window and the rod.
Once you have your desired measurement, make sure to add an extra 2 inches to the total measurement so you have enough of an overlap to fit the brackets.
Next, use a level and a drill to mark the exact placement of the bracket and then screw them into the wall. Make sure they’re securely held in place before putting the pole into the brackets. Finally, attach the curtain rings to the pole and hang up your curtains! To make sure the rod hangs securely, make sure to check that the screw is tight and secure and the brackets are securely in place.
How far should the curtain rod be from the window frame?
The placement of the curtain rod depends on the size and style of the rod, as well as the type of curtains being used. Generally speaking, it is recommended that the rod be placed four to six inches outside the window frame.
This gives the curtains a full and luxurious look, as well as allowing some light to enter the room. If the curtains are very long, the rod can be placed a bit further away from the frame, usually around 8 to 12 inches.
For small windows, the rod should be placed closer to the frame to give the illusion of a larger window. It is important to always double check the manufacturer’s instructions that come with the rod, as they will provide the best ideas on how to install the rod so that it is secure and suitable for the window.
Where should curtain rod brackets be placed?
The best place to place curtain rod brackets is based on the height of the window, the type of window treatment you choose, and your personal preference. Before you choose a spot, measure the width of the window, the height of the window, and the length of the curtains.
The most common mounting location is four to six inches above the window frame. This results in a higher curtain that will allow more natural light into the room while still providing privacy. However, some people prefer mounting the brackets on the wall two to four inches above the window.
This will make the windows appear taller but will reduce light entering the room.
If you are using decorative window treatments such as swags, jabots, or cascades, the brackets are usually placed six to eight inches above the window. This will help create a dramatic and elegant look.
When measuring the curtains, measure from the top of the brackets to the floor or bottom edge of the window treatment. This will give you the correct length of the curtains needed. You should also consider the type of rods and hardware you are using when attaching the brackets.
No matter where you decide to mount the brackets, take into account the style of room, your personal preference, and the window treatments when deciding on the location. With the right measurements and placement, your curtains will look perfect.
Can you hang curtains too high?
Yes, you can hang curtains too high. The ideal height of a curtain rod should be two to four inches above the top of the window and one to two inches above the molding. However, if you want your curtains to extend further up the wall, you can hang them higher.
This can be a great way to add the illusion of height to a room, or to cover up any imperfections on the walls around the windows. Just make sure that when you hang the curtains too high, they remain at a consistent height and don’t disturb any visibility when the curtains are open.
Additionally, you may want to consider ensuring that your curtains do not hang too far away from the wall so they don’t get in the way of furniture or décor nearby.
What size curtain rod do I need for 36 inch window?
The size of the curtain rod you need for a 36 inch window will depend on the size of curtain panels you are going to hang on the rod. Generally speaking, if you are going to hang curtains with a circumference of less than 24 inches when gathered together, you would need a standard 36 inch rod.
If you are hanging curtains with a circumference of more than 24 inches, you would need to buy a longer rod, such as a 48 inch rod. Additionally, the length of the rod should extend beyond the width of the window so that the panels are pulled back slightly, allowing more light to come into the room.
Is there a way to hang curtains without putting holes in the wall?
Yes, there are several different ways to hang curtains without having to put holes in the wall. Some ways to hang curtains without putting holes in the wall include the use of tension rods, adhesive curtain rods, curtain rod brackets and clip-on curtain rings.
Tension rods are one way to hang curtains without having to put holes in the wall. They can be used for various window sizes and can expand between 12” and 38”. These rods are easy to install as no additional hardware is needed.
Adhesive curtain rods are another popular choice as they are held in place with a removable adhesive that does not damage the walls. These rods come in various sizes and are easy to install.
Curtain rod brackets are designed to be installed at the top of the window and then hold the rod in place. The curtains can be hung from the rod and there is no need for any additional hardware. Finally, clip-on curtain rings are a great option for curtains as the rings attach directly to the fabric at the top of the curtain and then clip directly onto a rod.
No holes are needed and the curtains can be easily removed and adjusted when needed.
How do you close a gap between curtains and walls?
The best way to close a gap between curtains and walls is to use a tension rod or a curtain rod. If a tension rod is used, simply take the inside measurement of the gap, purchase the correct size rod, and insert it into the gap.
If a curtain rod is used, use wall anchors to screw the rod into the wall, making sure the correct size rod is purchased. For a more secure fit, install the rod on the wall above the window trim. Additionally, attach the curtains or drapes to the curtain rod using drapery hooks and hang them near the window trim.
Alternatively, use drapery holdbacks or drawstring tiebacks to help close the gap and keep the fabric off the window.
Can command strips hold up curtains?
Yes, command strips can be used to hold up curtains. They are a great choice since they are easily removable when no longer needed and leave no damage to walls. Using command strips to hang up curtains is an inexpensive and easy task that can be done in just a few minutes.
To use command strips you will need to match the size of your curtain rod with the size of the strips. You will then need to peel off the adhesive backing and press the strips onto the wall. Secure the brackets of the curtain rod into the command strip and press firmly.
Make sure the strips are aligned and level so the curtains hang evenly. Finally, slide the rod through the curtains and hang them up straight.
What can I use in place of a curtain rod?
In place of a curtain rod, you can use a tension rod, command strip hooks, or a creative DIY option. A tension rod is typically a metal or plastic rod that is secured in place by the tension of the rod itself.
Simply measure the space where you intend to hang your curtains and select the appropriate size tension rod. Command strip hooks are an adhesive-backed hook that utilize the strength of wall-safe adhesive to secure to walls and make it easy to hang your curtains.
If you’re feeling crafty, fishing line or wire can be used to hang lightweight curtains. Another option can be using a decorative wood closet rod or dowel. Measure the window opening and pick a size closest to the opening or slightly larger, then secure in place with appropriate wall mount hardware.
There are many easy and creative ways to hang curtains without a traditional curtain rod.
How do you hang curtains over horizontal blinds without drilling?
Hanging curtains over horizontal blinds can be done relatively easily and without drilling! There are a few key tools and techniques that you’ll need to achieve this.
First, you’ll need tension rods or drapery wands with clips designed to be used with blinds. These tools are designed to be adjustable, so once you have the right size, simply extend it to fit over your window frame, and then twist until it tightens on the blind headrail.
Many of these rods or wands also come with clips so you can attach the curtain panels directly to the rod.
If you don’t want to use rods or wands, you can also place a rod directly over the top of the blinds without drilling. The key here is to find a rod that’s the same size as your window and make sure that it’s wide enough to cover the headrail of the blinds.
Then use tension clips or sturdy drapery hooks that you can simply slip over the rod and onto the blind headrail. Again, you can then attach your curtains with clips to the rod.
Lastly, tension rods with magnetic ends are also available, which are a great solution for hanging curtains over horizontal blinds without drilling. Again, it’s important to get the right size for your window, and then the magnetic ends will easily attach to the blind headrail if it’s metal.
In conclusion, there are a variety of ways for you to hang curtains over horizontal blinds without drilling. Whether you opt for tension rods or wands, as well as a variety of clips and magnetic ends, you’ll be able to get the job done easily and without any fuss.
