Hanging curtains with valances involves a few steps. First, decide where you want to hang your curtain rods and measure the opening size. Install the curtain rods at the desired height. If you are using two curtain rods, the top rod should be used for the valance and the bottom rod for the curtains.
Place the valance rings on the top rod, spacing them the same distance apart as the grommets or tabs on the valance. Place the curtain on the bottom rod, then hang the valance on the top rod by slipping the rings onto the grommets or tabs.
You can use clip rings as well, in which case you would clip them onto the pleats of the valance. Once all of the rings or clips are in place, use a hand or power drill to secure the rods to the walls.
Finally, hang the curtains and valance to the rods, and your curtains are in place!.
Can I hang curtain and valance with one rod?
Yes, you can hang curtain and valance with one rod. To do this, you need to use a special combination rod that has both a regular curtain rod and a valance rod. This combination rod will allow you to hang two separate curtains and a valance on the same rod.
It is important to note that the combination rod will be thicker than a standard curtain rod and may require different curtain hardware or a depth adjustment to your existing hardware. In addition, you will also need a valance clip or hook to secure the valance onto the combination rod.
Finally, depending on the size of your window, it may be best to use two combination rods for a more secure fit.
How far down should a valance hang?
Typically, a valance should hang so that it roughly covers the top two-thirds of the window. It should not hang too low, as this can block unnecessary light from entering and make the room feel smaller.
The best way to determine where to hang your valance is to measure from the top of the window to where you would like the bottom of the valance to hang and then determine how long the valance should be before installing.
If you are uncertain, you should avoid hanging the valance too low, as it can be easily adjusted if needed.
How do you hang a valance without a rod?
Hanging a valance without a rod is relatively easy, provided you have the right hardware and supplies. First, you’ll need to measure the width of the window, to make sure the valance will fit properly.
Next, choose a lightweight valance, as heavier materials can be difficult to hang without a rod. After selecting the material, purchase an appropriate number of adhesive hooks. Measure and estimate the placement of the hooks, making sure to leave an equal amount of space between each hook.
Finally, attach the hooks to the wall and either hang the valance directly from them by using hangers or loop material, or tie it up with coordinating ribbon or string. Ultimately, hanging a valance without a rod will depend on the material and weight of the valance itself, making adhesive hooks the most ideal choice over nails or screws.
What do you use to hang a valance?
In order to hang a valance, you will need to use curtain rod brackets and a curtain rod that is wide enough to fit the length of the window. The curtain rod should sit a few inches above the window, and the brackets should be placed next to the window frame and mark where the screws will go, making sure they are level.
Then insert the screws into the wall and securely attach the brackets to the wall. From there, slide the rod into the brackets and make sure it’s securely attached. Finally, you can hang the valance onto the rod.
If the valance uses clip-on rings, simply attach the rings to the rod, ensuring that their spacing is even and secure. If using clip rings, the valance won’t move, so be sure to hang it at the desired height before attaching the clip rings.
For velcro attachments or fabric tie-backs, you can hang the valance onto the rod and then adjust the height accordingly.
Why does my curtain rod have two rods?
A curtain rod with two rods is usually referred to as a double rod, and it can be a great way to add a touch of style and versatility to your window treatments. With a double rod, you can hang sheer curtains on one rod and thicker curtains on the other, adding texture and depth to your window treatments.
You can also hang two different types of curtains on each rod, such as a heavier fabric curtain on the inner rod and a sheer or lace curtain on the outer rod. This allows you to easily control the amount of light you want in a room, as you can easily open and close the curtains as needed.
Another benefit of a double rod is that it allows you to hang a variety of accessories such as valances, sheers and jabots, giving you creative and decorative options for your window treatments.
How far apart should valance be from curtain?
Valances should be at least two to three inches apart from the top of the curtains. This will give the desired effect of having the valance frame the window rather than being on top of the curtains. When hanging the curtains and valance, mark the desired height of the valance and hang the curtains a few inches above that mark.
This will ensure that the valance appears to be floating a few inches above the curtains and adds greater dimension to the room. Alternatively, the valance could be hung directly over the top of the curtains.
However, this is best suited for rooms with a lower ceiling, as the valance will have a heavier look and can overpower the room aesthetically.
What is the point of a window valance?
Window valances are decorative accents used to dressing up the top of a window and add a touch of softness and style to a room. Valances are designed to provide a decorative element and provide an elegant way to conceal drapery hardware, or draw attention away from an outdated window or window treatment.
Window valances come in a variety of styles and fabrics to coordinate with any home décor. Valances can be hung alone on their own or paired with different curtain drapery panels to give an added elegant look.
Valances can be used to accentuate lower panels and drawers, adding texture and depth to a room. Valances can provide an additional layer of insulation to help keep your home warm or cool. They can also provide light filtering so you don’t have to worry about too much sun streaming into your room.
How wide should valance be for 72 inch window?
The width of the valance should generally be between 2/3 and 3/4 of the window width, so for a 72 inch window, the ideal valance width would be around 48-54 inches. You should consider how much of the window you want to cover, how much space you want the window to take up, and the overall size of the window when deciding on the size of the valance.
Additionally, the surrounding decor should also be taken into account to ensure that the overall design aesthetic is pleasing to the eye. If the window is located in a room with lower ceilings, you may want to opt for a slightly narrower design that won’t overwhelm the space.
If the window is located in a room with higher ceilings, a wider valance may be more appropriate.
How do you measure for a window valance?
Measuring for a window valance is fairly straightforward but should be done with some care to ensure a perfect fit. You’ll need to measure the total width of the window, including any frame, molding, or trim.
You’ll also need to measure the height of the window, including any trim or molding. For a standard valance, you’ll want to measure 4 inches beyond each side of the window and 2 inches above the window to ensure optimal coverage.
Calculate the total width of the window treatment so that you can purchase the right length of valance and necessary hardware. When it comes time to actually mount the valance, hang the valance rod at least 2 to 3 inches higher than the top of the window to allow the fabric to hang down in a pleat.
For a scalloped bottom edge, the fabric should hang slightly lower – about 6 inches below the window frame. Be sure to use a level and secure mounting screws into studs in the wall for best results. And if you’re using multiple pieces, ensure that they’re level with each other.
That’s all there is to it – happy measuring and decorating!.
How wide should a window cornice be?
The width of a window cornice will depend on what style you are trying to achieve. Generally, the larger the window, the larger the window cornice should be. A typical cornice width should be between 4 and 6 inches.
If you are looking for a more dramatic look, you may want to increase the width up to 8 inches. You might also want to consider the room size and the amount of window space when determining the width of your window cornice.
A larger width cornice can help create a sense of balance and proportion between the window and room size. If the cornice width is too small, it won’t be as visually noticeable and can look out of proportion.
Therefore, it is important to consider your room size, window size, and design goals when determining the appropriate width for your window cornice.
How long should a valance be on a sliding glass door?
When selecting the appropriate length for a valance on a sliding glass door, the length of the curtain should be at least 2-4 inches wider than the width of the window or door, as this allows for a full and luxurious appearance when the curtains are closed.
When measuring for the proposed valance, measure from the top of the door or window to the desired length you would like the valance to be. Valances on a sliding glass door are typically hung 1-2 inches above the top of the door frame.
Furthermore, the valance should be to the desired length ending just above it or slightly lower. It is important to check that the valance does not hang too low, as this will block the view from the door or window.
When measured to the desired length and hung, it should appear as if the bottom of the valance and the top of the sliding glass door are in the same plane when viewed from the side. By following these guidelines, you should have a beautiful valance to accent your sliding glass door.
