If you have a smart TV box you would like to hide, there are a few options you can explore. The first option would be to use a TV stand or entertainment center to hide the box. Choose one with plenty of storage space and enough compartments to conceal the box, cables and accompanying accessories.
If you are short on space and do not have room for a bulky entertainment center, place the box in an inconspicuous corner of the room and cover it with an item such as a blanket, cloth or furniture slipcover.
Try placing a few house plants around the box to further obscure it. If you prefer to completely conceal the box, attach it to the back of your television or mount it to the wall behind the screen. Finally, you could build a piece of custom-made furniture such as a TV cabinet where you can store the box.
How do you hide TV outlets in the wall?
Hiding TV outlets in the wall is a great way to minimize the unsightly mess of cords when mounting a TV. The process of hiding the outlets is relatively easy, and involves a few simple steps.
First and foremost, disconnect the power from the outlets and any other appliances that will be affected. It is essential to ensure a safe working environment.
Next, switch off the circuit breaker for the outlets in the fuse box—to ensure there is no possibility of electric shock.
Then, remove the outlets from the wall. This is typically done by unscrewing them, and then gently prying them out with a flat-head screwdriver.
Using a wall-plate kit, cut an opening in the wall to match the size of the outlet and fit the wall plates around the box. Be sure to leave a 1/8” clearance around the edges.
Using the existing wiring, fished through the wall studs and secured to the outlet box, connect the wiring to the new outlet covers. Once it is all connected, secure the new outlet covers to the wall plate.
After checking the connections and wires are secure, turn the circuit breaker back on and plug the appliance or TV into the outlet.
Take the extra time and care to hide TV outlets in the wall, and your TV will look neater and tidier.
How do I hide TV box if I use remote?
The best way to hide your TV box if you’re using a remote to control it is to tuck it away neatly behind or underneath your TV set. For example, if your TV is mounted on the wall, then you may be able to put your box behind the wall mount, where it will be out of sight and won’t interfere with the remote signal.
You could also affix the box to the back of the TV, if the dimensions are small enough to fit and it won’t be in the way. Another option is to find a dedicated media console or cabinet that will hide your box while keeping it accessible.
Depending on your TV setup, it might also be possible to tuck away the box in an adjacent room, that can be accessed with a long HDMI cable from your TV. Although it’s not as tidy, keeping the box within range of the remote signal is key for this solution.
Finally, you may also be able to use infrared signal extenders in order to control your box from anywhere in your home.
Where do you put cable box for wall mounted TV?
The best option for installing a cable box for a wall mounted TV is to mount the cable box as close to the TV as possible. It’s best to secure your cable box to the wall or cabinet underneath the TV if possible.
If the box is too large to fit in that area, you can put it on a shelf of some kind behind the TV or even on the floor near the power outlet. Make sure that the cables used for the TV and the cable box are of high quality and that they are long enough to reach the cable box without stretching.
If you are mounting the cable box on the wall, make sure to use the supplied brackets and wall anchors provided by the manufacturer. To ensure the best picture and sound quality, it’s a good idea to run the coaxial cable from the cable box to the TV directly, along with any other cables, such as HDMI and Ethernet, required.
If you don’t want to drill into walls, another option is to use a mount that holds both your TV and cable box.
Does cable box have to be visible?
No, your cable box does not have to be visible. It is typically recommended that you keep it in an open area where it can get adequate ventilation and be free of obstructions. However, depending on your home’s individual setup, it is possible to hide it behind furniture or install it in a closet.
You will need to be sure that the area where you’re placing your cable box is not too hot or too cold, as excess heat or cold can affect its performance. Additionally, if you choose to hide the cable box, you may need an extension for your remote control signal to reach the device.
What do I do with my cable box when I mount my TV above the fireplace?
If you decide to mount your TV above the fireplace and you want to still use a cable box for programming, you’ll need to come up with a plan for how to attach the cable box to the TV. One option is to mount a shelf above the fireplace along with the TV, and place the cable box on the shelf.
If you don’t want to or cannot install a shelf, you can also use a cable box wall mount. This will secure the cable box to the wall near the fireplace and the cable can then be connected to the TV’s inputs.
If either of these options are not feasible, you may also consider a wireless cable box that can be placed on another shelf near the TV. All of your remote commands would still activate although you will no longer have to be connected to the TV Unit by wires.
Where do you put the one connect box?
The One Connect Box should be placed in a safe and convenient area that is free from interference and can easily access a power source. When determining the placement of the One Connect Box, you should also keep in mind that the surfaces where the device is installed should be level and strong enough to support the One Connect Box and the connected components, such as cables and other external devices.
One best practice is to place the One Connect Box close to the TV and entertainment system, as this will make it easier to connect with other components and minimize long distance cords and cables. Depending on the size of the TV, it may also be best to place the One Connect Box at an elevated or recessed position so that it does not get in the way of other components.
Finally, keep in mind that the One Connect Box should have adequate ventilation, as it can become warm when in use and should never be placed in a cramped space.
Can I put my TV on top of my cable box?
Yes, you can put your TV on top of your cable box but it is not recommended. This can put pressure on the cable box which can cause the internal components to overheat and potentially cause a malfunction.
Additionally, if you have a cable box with a fan, having an object, such as a TV, on top of it can block the fan and prevent it from cooling the internal components causing further damage. If you absolutely must stack your cable box and TV, make sure they are securely fastened to each other and that there is plenty of space between them to allow air to flow freely.
How can I get cable in another room without a box?
To get cable in another room without a box, you can use a cable splitter or an HDMI adapter. A cable splitter is a device that splits the signal from a coaxial cable into two or more parts. It is used to distribute a single signal to multiple TVs in different rooms.
An HDMI adapter is a device that converts the signal from a coaxial cable into a digital signal that can be used to connect to a TV. It can be used to connect multiple TVs in different rooms. Both of these devices require an input from the coaxial cable and the output is either split or converted into a digital signal.
To use them, you will need to make sure the connections are tightened and secure. Additionally, you’ll need to make sure the input cable is connected to the outlet of your primary cable box. After that, simply connect the splitter or HDMI adapter to the output of your primary cable box.
Now, you should be able to get cable either split or in digital form to your other rooms without the need for a box.
Can I hide my cable box and still use a remote?
Yes, you can absolutely hide your cable box and still use a remote. There are two main ways to do this: placing the box out of sight and utilizing an IR remote extender. If you want to keep your cable box out of sight, but close enough to access using a remote, you can purchase an IR extender.
This type of device will convert the signals from the remote into infrared light and allow you to remotely control the box from a different location. You can then run the extender to an IR receiver, which will in turn be connected to your cable box to receive the commands from the remote.
Where does the TV console go on the wall?
Where the TV console goes on the wall depends on the size and weight of your unit, as well as any other equipment that needs to be mounted in the same space. When mounting your console, use a stud finder to locate the wall studs, mark them, and use the appropriate wall fasteners.
Make sure to choose the right type of fasteners to support the weight of your TV, console and any other components. Depending on your wall mount bracket design, you may also want to use additional support for heavier TV consoles or equipment.
Finally, use bubble levels and run a tape measure from the floor or ceiling to double check your mounting level before tightening the wall fasteners.
How can I hide my cable box?
Hiding your cable box is a great way to keep your television space looking neat and organized. There are a few different ways to do this.
One option is to cover the cable box with a decorative item, such as a vase, figurine, or plant. You can also use a piece of furniture to hide the box, such as a cabinet, ottoman, or picture frame. Choose something that is sturdy enough to accommodate the weight of the box.
An alternative option is to mount the box on the wall. Mounting brackets specifically designed to fit the cable box model can be purchased online and at home improvement stores. This will hide the box behind the television and free up floor or shelf space.
Finally, you can hide the cable box behind the television. This can be done by attaching the brackets to the back of the television and connecting the box to it. Be sure that there is enough room for the wires to reach the television and the box.
This is an ideal option if you want a clean and streamlined look.
Is it better to wall mount a TV or put it on a stand?
It really depends on the setting of your living room and personal preference. Wall mounting a TV gives more visibility and the TV does not take up any space in the room; it maximizes the space available.
It can also be adjustable, allowing you to move the TV to the best position for your viewing. On the other hand, putting a TV on a stand allows it to be easily moved from place to place and can also provide a good seating arrangement around the TV.
It can also be used as a decorative piece for your living room. Ultimately, it is entirely up to you to decide which is more suitable for your living room.
How do you hide wires on a wall mounted TV above fireplace?
The main goal when hiding wires on a wall mounted TV above a fireplace is to keep them out of sight while still providing easy access for any future repairs. The most common way to do this is by concealing the wires behind the wall.
This can be done by running them through a hole drilled in the wall that is covered with a plastic grommet to keep drafts and other debris out. Once the wires are in place, they should be secured safely with clips or straps so they do not hang down or cause any other hazards.
Another option is to use trunking, which is a special sheet of flexible plastic that the wires can be laid into and the sheet can be fixed to the wall. You could also use recessed wall boxes, which are hollowed out pockets in the wall that you can hide the wires away in.
Finally, cover the cables in a wall rated casing or conduit to further hide them from view while still providing easy access.
How can I hide my TV wires without cutting the wall?
One of the best ways to hide TV wires without cutting the wall is to use cable covers or cord conduits. Cable covers are essentially strips of fabric that you can loop around wire bundles to make them look tidy and blend into the background.
You can buy them in a variety of colors to match your walls, and they can be used to cover wires without requiring any tools. Alternatively, cord conduits are plastic channels you can attach to baseboards or moldings and then feed the wires through.
This allows for a clean, sleek look and makes it easy to organize wires. Additionally, you can hide your wires behind furniture as long as it is long enough to completely cover the wires. This can be a great option for disguising cords in an aesthetically pleasing way.
Can you hide TV power cord behind wall?
Yes, you can hide your TV power cord behind the wall. Hiding the power cable behind the wall is an attractive and effective way to declutter your entertainment area. To do this, you should mount the TV flush against the wall to conceal the power cable behind your wall.
You can do this by securing the TV mount to the wall, and using wire molding or a low-voltage cable raceway to hide the wires and cable connectors. If you are unsure of how to install the mounting hardware or wire molding yourself, you may want to consider hiring a professional who has water experience with this.
Once everything is installed correctly, you can enjoy your clean living space with your TV securely mounted and cables out of sight.
How do you make a wooden shelf for a TV?
Making a wooden shelf for a TV starts with selecting the right wood. Oak and maple are two good choices as they are strong and can hold a lot of weight. You then need to figure out what shape and size you want the shelf to have.
Depending on the size and placement of your TV, a rectangular shelf is typically best.
Once you have chosen a design and the tools needed, you can start sawing the wood and assembling the shelf. For a beginner, an easy way to saw the wood is to use a jig saw. Once you have cut out the pieces, you can then use wood glue, screws, and nails to assemble the shelf.
It is important to check for irregularities at this stage, as it could affect the shelf’s balance when you put the TV on it.
After the shelf is assembled, you can sand it down to make it smoother and paint or varnish it. For best results, use a fine-grade sandpaper and sand the wood in a circular motion. Once the sanding is done, you can use a wood finish or paint to give it a nice finish that matches your room.
Finally, you will need to mount the shelf on the wall. You can use heavy-duty brackets or screws that are appropriate for the size and weight of the shelf. Be sure to check the wall is securely anchored to the studs so it can support the weight of the shelf and TV.
Following these steps will help you make a wooden shelf for a TV that is strong and well-made. With some patience and attention to detail, this project can turn out to be a great success.
How do you build a TV wall panel?
Building a TV wall panel begins with finding a structure that is appropriate for the weight of the TV and mounting bracket. The instructions for mounting the bracket will vary based on the wall material, so consult the instructions for your mounting bracket for details about the appropriate type of fasteners for the wall material.
Also, prior to installation, verify that you have adequate space for the bracket and TV.
Once the mounting bracket is in place, the wall paneling can be installed around it. Start with the back panel first, which will hold the TV in place. Determine which side the TV will face and the exact location of the bracket, then measure the back panel to fit the size of the TV and any gap needed for cords and mounting hardware.
Cut the back panel to size, then attach it to the back of the mounting bracket with screws.
Next, attach the sides to form the box around the TV. Depending on the look desired, the sides can be plain plaster, drywall, wood, or any other suitable material. Once the sides are attached, finish the wall panel assembly by cutting the top and bottom panels and attaching them to the box.
Finally, use the appropriate fasteners to mount the TV securely within the box and display the wall art, pictures or accessories of your choice. Make sure to test the TV and wall panel for functionality prior to hanging any decorations.
Enjoy your new TV wall panel!.
