Installing a Toto Aquia toilet is a relatively straightforward process. The first step is to place the toilet bowl in the desired position and mark out the mounting holes for the toilet tank. Once the holes have been marked, use a drill and bit to create the mounting holes and then secure the bowl to the floor with the provided hardware.
Once the bowl is secure, set the toilet tank on top and secure it to the bowl using the provided hardware. Next, attach the supply line to the back of the toilet, making sure that it’s tight enough to create a watertight seal.
Finally, attach the flush handle to the tank, making sure that it is in the correct position and securely fastened. Once all the parts have been put together, the toilet should be ready for use.
How do you install a dual flush system?
Installing a dual flush system is fairly straightforward. The first step is to turn off the water at the mains. Then, you’ll need to disconnect the existing toilet cistern and flush valve. You’ll need to have some basic tools to help with this, such as a wrench, an adjustable spanner, and some pliers.
Once you have disconnected the existing cistern and flush valve, you can begin to fit the dual flush system. This will usually consist of the cistern, flush valve and control button. Start by installing the cistern onto the wall.
Then, fit the flush valve into the cistern and screw it into place. You’ll need to ensure that the valve is properly sealed, to avoid any leaks.
Once the cistern is fitted, you can now attach the flush box, control button and flush cable. It’s important to follow the instructions that come with the system to ensure that it’s properly fitted. If everything is connected properly, you can now re-connect the water supply and test the dual flush system.
Most systems are compatible with a variety of different toilet designs, so you should be able to install the dual flush system without too much difficulty. With regular maintenance and the occasional replacement of parts, you can enjoy the benefits of a dual flush system for years to come.
What is the average cost to install a new toilet?
The average cost to install a new toilet is between $250 to $400, depending on the location, the quality of the new toilet, and the complexity of the installation. For a standard installation in an easy-to-access space, the labor cost should be approximately between $150 and $200.
The cost of the toilet itself is usually between $100 and $200, depending on whether you buy it from a home improvement store or a plumbing supply store. If the installation is more complex, such as in a tight space or if replacing an older toilet with a newer one, the cost of installation could be as high as $400.
Other costs to consider include the cost of the wax ring gasket ($5-$10) and additional hose or pipe fittings.
Are there any disadvantages to a one-piece toilet?
Yes, there are some potential disadvantages to a one-piece toilet. The most common disadvantage is that one-piece toilets tend to be much more expensive than two-piece toilets. Additionally, the installation of a one-piece toilet can be more labor-intensive and require more advanced skills than a two-piece toilet.
Finally, the design of a one-piece toilet can make it more difficult to make repairs and replacements. An additional potential disadvantage is that, due to the minimal design, one-piece toilets often don’t provide more storage than a two-piece toilet.
Can you replace a 2 piece toilet with a 1 piece toilet?
Yes, you can replace a 2 piece toilet with a 1 piece toilet. If you have a two piece toilet, you will need to separate the tank and the bowl from the floor flange. Once the two pieces are separated, you can remove the old bowl and flush valve, then install the new 1 piece toilet.
You will want to make sure that the floor flange is secured properly before attaching the new toilet. After installation, the new 1 piece toilet will need to be connected to the existing water supply line and sewer outlet, and you may need to adjust the height of the flange if the new toilet is a different model from the old one.
Additionally, you may need to install a wax ring with a plunger to ensure a good seal. Finally, follow manufacturer instructions to ensure that everything is connected correctly and the toilet is correctly installed.
What is the difference between a one-piece toilet and a two piece toilet?
The main difference between a one-piece toilet and a two-piece toilet is the type of construction. A one-piece toilet is a single unit, with all of the parts molded together as one solid piece. The tank and bowl are both integral parts of the one-piece, so the entire toilet comes pre-assembled, ready to install.
A two-piece toilet is split into two components; the tank is separate from the bowl. This type of toilet must be installed separately, and bowl components including the seat, flush lever and other necessary hardware are typically not pre-installed.
One-piece toilets can take up slightly less space than a two-piece model, and they are generally easier to install. However, if one of the components of a one-piece toilet needs to be replaced, it is much more difficult to disassemble than a two-piece model, since they are all molded as one unit.
Two-piece toilets are usually more economical than one-piece toilets, and they are easier to repair or replace one of the components when need be.
How often should you replace your toilets?
It depends on the age and condition of the toilets you have. Generally speaking, toilets typically last between 25 and 30 years. However, factors such as the quality of installation, water pressure, and water chemistry can affect the longevity of a toilet.
Toilet tanks may need to be replaced within 10-15 years, while the bowl may last much longer. It’s important to inspect the toilets once a year to ensure that all components are functioning properly.
If there are any signs of leakage, discoloration, or damage, it’s best to replace the toilet as soon as possible. You should also take note of any signs of aged hardware or water marks, as these can be signs that a replacement is needed.
Additionally, if any of the toilet components are outdated or not up-to-code with current regulations, replacing them will ensure the safety of your home and its occupants.
Are elongated toilets better?
As it often comes down to individual preference and the space in the bathroom. Elongated toilets typically offer more comfort due to their larger bowl size, which is especially suitable for taller people.
This might make them a better choice for taller people or people who prefer a larger sitting surface. However, elongated toilets do take up more space than round toilets, so for smaller bathrooms, the round option may be more suitable.
Additionally, the elongated models can be more expensive than their round counterparts, so if cost is a major factor in the decision-making process, then the round option may be the way to go. Ultimately, the decision between elongated and round toilets comes down to personal preference, space availability, and cost.
What is a close coupled toilets?
A close coupled toilet is a type of toilet which combines the cistern (the water container located at the back of the toilet bowl) and the pan (the toilet bowl) into a single piece unit. This type of toilet usually rises at a right angle from the floor and none of its components are visible.
As close coupled toilets are a single unit, they are relatively easy to install and they do not require extra space to provide access to free-standing cisterns. They are also less likely to leak at the back since none of the components are separately connected.
Additionally, they can be designed in various shapes, sizes and colors to suit different bathroom settings and styles.
What is a skirted Trapway?
A skirted trapway is a feature on certain models of toilets. It is a more aesthetically pleasing alternative to the traditional exposed trapway and offers a smoother look to the toilet bowl. The skirt is typically made of a hard plastic or ceramic material, and it encases the trapway, which is the portion of the toilet that connects to the drain.
This added piece makes it easier to clean around and in the bowl, as the exposed trapway can be difficult and time-consuming to clean properly. Skirted toilet bowls are also easier to keep clean, as there are no nooks and crannies where dirt or debris can collect.
Furthermore, skirted trapways have a lower profile, meaning they look smoother, sleeker, and less blocky than their exposed counterparts.
Is it harder to install a skirted toilet?
Installing a skirted toilet typically means a bit more time and effort than installing a standard toilet. Skirted toilets have a special connection to the sewage line, which requires additional effort.
Additionally, the shape of the skirted toilet can make access to the sewage line challenging, depending on the layout of your bathroom. Some skirted toilets also require additional caulk or sealant to hold the base to the floor.
All these extra steps can make the installation process a bit more tedious.
If you are not confident in your ability to install the toilet, or you don’t feel comfortable working with sewage lines, it’s best to call in a professional. A plumbing expert can help you get the job done quickly, safely, and correctly.
In the end, it may save you time and money by ensuring the job is done correctly the first time.
What is a good Trapway size for a toilet?
The ideal trapway size for a toilet is at least 2 inches. This is because larger trapways help to move waste away more efficiently and reduce the likelihood of clogs. Toilets with a 2-inch trapway are the most recommended, as the large diameter traps allow for the highest flow.
The larger the trapway, the better the performance in most cases. Keep in mind, however, that toilet trapways 3 inches or larger may require additional plumbing work to be done. Additionally, there are ADA (Americans with Disabilities Act) regulations for toilets with a 2-1/4 inch trapway size that must be met in order to qualify for certain public-area installations.
Do corner toilets save space?
Yes, corner toilets are a great option for people who are short on space but want to maximize the usability of their bathroom. Corner toilets are designed to fit into the corner of a room and take up less space than a traditional toilet, allowing for more room for other fixtures in a smaller bathroom.
Corner toilets are often more comfortable to sit on due to their larger size and back-to-back tank orientation. They come in a variety of different styles and designs, offering great versatility in both function and aesthetic appeal.
Corner toilets are an ideal solution for bathrooms with limited floor space and are a practical and affordable choice for bathroom remodeling.
How do you remove hidden Toto toilet seat?
Removing a hidden Toto toilet seat will depend on the specific model you own, but it generally follows the same process. Start by unhinging the seat from the brackets that hold it up. You might find screws or clips that need to be loosened before the seat can be removed.
Once the seat has been lifted off, locate the two hinges that connect the seat to the toilet bowl. Unscrew these screws and the seat should come free. Once the seat is removed, you should be able to access the brackets and screws that hold the hidden Toto toilet seat in place.
Unscrew the brackets and screws and replace them with those included with the new seat. Finally, reattach the seat to the new brackets and you should be all set.
Can you put any toilet seat on a Toto toilet?
Yes, you can put any toilet seat on a Toto toilet, but it is always recommended to use a Toto toilet seat that is designed and manufactured specifically for Toto toilets. These specially made toilet seats come with the correct mounting hardware and match the shape and size of the Toto toilet for a secure and comfortable fit.
Toto’s proprietary toilet seat technology provides superior soft-close, quite closing, and installation perfection, so it’s best to use a Toto toilet seat for optimal performance.
Is TOTO Washlet compatible with Kohler toilet?
Yes, TOTO Washlet is compatible with most Kohler toilet models. It has a universal design that works with any type of two-piece and one-piece toilets. However, some users may need to purchase a special adapter for a complete installation.
Additionally, some Kohler models may not be compatible with certain TOTO Washlet models due to design differences. To ensure compatibility, it’s best to purchase the product directly from TOTO or its authorized distributors.
What is a wrap over toilet seat?
A wrap over toilet seat is a type of toilet seat that fits over the existing toilet seat and lid, providing an additional layer of protection against dirt and bacteria. This type of toilet seat is beneficial as it can be easily removed and cleaned or replaced when it gets worn or damaged.
It is designed to provide an extra layer of protection against splashing, soiling and germs. The wrap over toilet seat is also often padded for added comfort, which makes it great for longer periods of use and is ideal for people with mobility issues.
The wrap over design is easy to install and helps to protect the surface of the existing seat and lid from scratches.
