Making a chainsaw chain shorter involves several steps. First, you must make sure the chainsaw is turned off, preferably unplugged. It’s also a good idea to wear protective gloves and eye gear when handling the chain.
Doing so will prevent the chain from harm and help protect you from the sharp edges.
Next, you must remove the bar and thieving screws from the chainsaw. Once these are removed, you will be able to access the drive links, which connect the saw chain to the chainsaw bar. As you remove the drive links, be sure to keep them in a safe place.
Once you have all the drive links removed, you can begin trimming your chainsaw chain. If you want to make the chain shorter, remove one or more full lengths of chain between the two rivets. Be sure not to remove any rivets or links because this will make the chain ineffective.
Once you have the desired length, place the cut pieces back into the chainsaw and insert the rivets back into their positions. Finally, you will have to retighten the thieving screws and then reattach the bar to the chainsaw.
With these steps, you have successfully shortened your chainsaw chain and can resume using it as usual.
How do you cut a chain without a tool?
Cutting a chain without a tool is possible, but it can be challenging and time-consuming. Start by finding two points of the chain that you want to disconnect. Thread one end of the chain through the other and hold it tight so that the links are flush against each other.
Then, use a pair of pliers and several small pins to grip the chain links together and twist them together. This will cause the metal to bend and eventually the chain will break in the middle. If you don’t have a pair of pliers, try using a rock or a hard stick.
You can also try to bend the chain by grabbing it with both hands and manually pulling each side in opposite directions until the chain breaks.
How do I remove a link from a chainsaw without the tool?
Removing a link from a chainsaw without the proper tool can be a difficult and potentially dangerous task, so it should only be attempted in an emergency situation when no other tools are available. To do so, first use a pair of gloves to protect your hands from the chain and sharp edges.
Ensure the chain is disconnected from the drive sprocket, and then secure it in a vice with the chain links facing upwards. Use a sturdy flathead screwdriver and a hammer to carefully and steadily pound on the side of the link in order to loosen the rivet.
Eventually the rivet should become loose enough to pull apart by hand. If not, gently make a small indentation with a nail set to create space between the top and bottom parts of the link and use a sharp knife or chisel to pry it apart.
What can I use to cut chain?
You can use a variety of tools to cut chain, depending on the type of chain being used and how large of a cut you need to make. If the chain is relatively small, a pair of wire cutters can be used to easily snip through it.
A wire cutter will simply cut the chain at the spot you place it on the surface. For larger or thicker chain, you may need to use a power tool, such as an angle grinder with a cutting blade attachment or a sawzall with a chainsaw blade attachment.
Power tools are able to make a smoother and cleaner cut than wire cutters, but may require more safety precautions. When cutting any kind of chain, it’s important to wear eye protection and other safety gear as fragments can be thrown in your eyes or face.
How do you shorten a chain necklace without cutting it?
If you would like to shorten a chain necklace without cutting it, there are a few ways to do this. The first method is to use a jewelry tool called a jewelry-making jump ring, which can easily and securely attach two ends of a chain to create a loop.
This method works by placing the necklace through the jump ring and then closing the loop with tweezers or a special jewelry-making plier. By looping the necklace back through the jump ring, you can create a shorter necklace length.
Another method is to use a jewelry-making clasp. A jewelry-making clasp is typically used in combination with jump rings to secure a necklace in place, but can also be used to shorten it. Simply attach the clasp at the desired length of the necklace and the tension of the clasp should hold the necklace in place.
This method is great for when you want to quickly and easily shorten your necklace without the need of additional tools.
How do you cut a heavy chain?
Cutting a heavy chain typically requires the use of an angle grinder to first carefully score the chain and then cut through it using a special cutting disk. It is important to use the correct disk so that it doesn’t shatter while cutting.
You need to wear safety glasses while doing this to prevent debris from entering your eyes. To begin, make sure that the chain is secured properly so that it doesn’t move during the cutting process. It is best to then use a marker to draw the line where you want to cut the chain.
Next, switch the angle grinder on, aim the disk at the line and slowly begin to cut through the chain. You may need to adjust the depth of the cut to ensure that the blade doesn’t catch on any excess chain links.
Position the disc into the chain at a shallow angle and then push the grinder forward in a smooth, continuous movement. Do not press too hard or attempt to cut the chain too quickly. Move the disc slowly around the chain to complete the cut, and once you have finished, make sure that all the links are evenly cut.
Once the cutting is finished, the chain can then be separated from the appropriate section using a set of bolt cutters.
Do low kickback chains cut slower?
No, low kickback chains don’t typically cut slower. Low kickback chains are designed to reduce the risk of kickback, which occurs when the saw kicks back from the material being cut. Low kickback chains reduce the risk of kickback by having less aggressive cutters and more rounded links between the cutters, which can reduce the grip between the saw and the material.
This reduced grip helps to reduce the potential for kickback, but it won’t slow down the rate of cutting. In fact, recent studies have shown that low kickback chains may even cut more efficiently due to their reduced kickback risk.
Ultimately, the performance of any chain depends on its design, but low kickback chains should not necessarily be perceived as cutting slower.
What are the parts called on a chainsaw chain?
The chainsaw chain is made up of several parts:
1. The Drive Links: These form the base of your chain and link with each other, joining the chain links together. Drive Links have sharp teeth, which are designed to cut through wood.
2. The Cutter: The Cutter is the part of the chain responsible for cutting through wood. It is made up of small, sharp teeth and is designed to create a smooth cut by removing wood in small chips.
3. The Rakers: Rakers are just behind the Cutter. They are designed to clear away sawdust from the Cutters and can reduce the possibility of knotting a chain.
4. The Depth Gauge: The Depth Gauge is a small bar that is mounted below the Cutter. It is used to measure the depth at which the Cutter is cutting into the wood.
5. The Front Face Plate: The Front Face Plate is the part at the front of the chain. It holds the chain in place and helps keep it from slipping or becoming tangled.
6. The Back Face Plate: This is the part of the chain at the back of the chain. It also helps keep it from slipping or tangling.
7. The Chain Link: Finally, the Chain Link is what connects all of the parts of the chain together. It gives the chain the ability to move along the bar and make a smooth cut.
What is anti kickback chainsaw chain?
An anti kickback chainsaw chain is a type of chainsaw chain designed to resist kickback, which occurs when the tip of the saw’s chain comes in contact with an object and suddenly stops, causing a violent reaction in the direction of the user.
This type of chain has been designed with a series of chamfered links that are slightly angled, allowing the chain to move along the surface of the object and deflect kickback. Additionally, anti kickback chainsaw chain is typically larger and heavier than standard chain, which can also reduce the chain speed and therefore, the kickback forces.
This type of chain is ideal for use near work surfaces where kickback is more likely to occur, such as trees and fence posts.
Why do drive links matter on chainsaw?
Drive links are an essential part of the design of a chainsaw chain, as they are what allow the chain to move along the bar. Drive links are reinforced links at the top of each chain loop, and they have teeth which fit into the drive sprocket of the chainsaw.
Having the right size and type of drive links is important, as it allows the chain to turn in a smooth and efficient manner. Additionally, if the drive links are too small they can cause the chain to slip and cause extra wear and tear on the chainsaw.
Incorrectly sized drive links can also wear more quickly, causing more frequent chain replacements, which can be costly. Additionally, drive links that are too large can cause damage to the cutting surfaces of the chainsaw.
In short, drive links play an important role in a chainsaw’s performance and avoiding costly maintenance, so it is important to make sure the link you choose is the correct size and type for the particular chainsaw you are using.
What chainsaw chain do professionals use?
Professional chainsaw users typically choose chainsaw chains based on the kind of work they will be doing. For general use, a low-profile 3/8-inch pitch chain is a good choice as it can take off both hard and soft wood efficiently.
For heavy-duty cutting, a. 404-inch pitch chain is a better choice, as it can handle larger trees and hardwood effectively. Additionally, professionals may choose a carbide- tipped chainsaw chain for cutting through tough material like concrete or metal.
Lastly, it is also important for professionals to select a chainsaw chain that is compatible with the chainsaw they are using and their specific needs.
What chainsaw pitch is best?
Ultimately, the best chainsaw pitch will depend on your individual needs as a sawyer. Generally speaking, a lower pitch chain will offer less kickback and is usually best for novice sawyers and those who need to cut smaller objects.
Higher pitch chains will generally cut through larger pieces of wood more quickly and are better for experienced operators who need to work quickly.
When choosing a chainsaw pitch, it is important to consider the type of lumber you’ll be cutting, the type of saw you’ll be using, and the conditions in which you’ll be using it, as well as your own comfort level when using the saw.
For instance, if you’ll be cutting a particularly robust material such as oak, you may find that a higher-pitched chain is best as it will provide greater cutting performance. You may also find that a higher-pitched chain produces less kickback, which is important when dealing with heavy or hard materials such as oak.
It is also important to consider the saw you’ll be using. If you’re preparing to use a smaller chainsaw, you may find that a lower-pitched chain is ideal because it will put less stress on the saw’s engine and produce less vibration, reducing fatigue and kickback.
Conversely, a saw with more power may be more suited to a higher-pitched chain, as it will usually be less prone to tangling and twisting when being used for heavy-duty tasks.
Ultimately, if you’re unsure of what chainsaw pitch will be best for your needs, it is best to consult with an experienced sawyer who can help you select the best option for the work you’ll be doing.
What are drive links?
Drive links are links that provide access to a file or folder stored in a cloud storage service. They are a convenient way of sharing information with others without having to send the actual file. By sharing the link, the recipient will then be able to access the file from the cloud storage location.
Drive links are especially useful for sharing large files, as well as collaborating on documents or files with other users. Drive links can be created for files stored in services such as Dropbox, Google Drive, OneDrive, iCloud, and Amazon S3.
When creating a link, the user typically has the ability to control when the link will expire, as well as control who can access the link. Drive links have been utilized by both individuals and businesses over the years, as they facilitate easy file sharing while helping maintain security and privacy of data.
How many drive links Stihl 20 inch bar?
The number of drive links on a Stihl 20 inch bar depends on the model of the chainsaw. Generally, Stihl recommends that the 20 inch bar has 68 drive links when used with a 91 or 100 series saw and 67 drive link when used with a 020 and 024 series saw.
For the older 021, 023 and 025 series saws, the recommendation is 64 drive links. Each drive link is 9.525 mm in length and has a pitch of 0.325 inch. It is important to refer to the user manual for your specific model for the correct number of drive links.
Can a chainsaw chain stretch too far?
Yes, a chainsaw chain can stretch too far. With regular use and time, chainsaw chains naturally stretch due to accelerated wear and tear caused by the movement of the chain and the friction of the bar.
This is because the bar and chain exposed to friction naturally expand and elongate, causing the chain to increase in length as it wears down.
When a chain has stretched too far it can cause kickback, an instance where the chain moves rapidly towards the user in an uncontrolled manner and can cause serious injury. If a chainsaw chain does not cut the way it is designed to, for example, leaving a sawed log with a ragged edge, it is important that the chain is checked for tension.
It is recommended to regularly check the tension of the chainsaw chain and adjust it as needed. By using a chainsaw file, the user can adjust the chain tension to the correct setting for the length of the chain being used.
Excess tension can cause the chain to be too tight, making it difficult to pull the chainsaw through a cut, and too loose if the chain has stretched too far. It is important to ensure that the bar and chain have the proper tension and that they are checked regularly to minimize the risk of kickback and ensure safe operation of the chainsaw.
Can you shorten a stretched chainsaw chain?
Yes, it is possible to shorten a stretched chainsaw chain. The first step is to draw a short line across all the teeth of the chainsaw chain on the top outside and bottom outside of the chain. Determine the amount of chain that needs to be removed and mark it on the line you just drew.
With the help of an adjustable wrench, loosen the existing nuts and bolts that help hold the chain in place to enable easy removal. Then, use a pair of chain cutters to cut the main chain in the middle of the two lines that you drew.
Put the chain back on the saw in the same orientation as it was on the chainsaw when the chain was originally installed. Make sure all the links are in their correct positions. Finally, use the adjustable wrench to tighten the nuts and bolts again.
After that, you have successfully shortened the stretched chainsaw chain.
What happens when a chain stretches?
When a chain stretches, the links of the chain begin to separate, and the amount of tension placed on each individual link begins to increase. This stretching can cause links to wear out faster and can cause links to break.
The amount of stretching that a chain can take before it starts to break will depend on several factors, including the material used to construct the chain and the amount of force being placed on the chain.
To reduce the strain on the chain and extend its lifespan, it is important to readjust the slack in the chain regularly to ensure that it is not placed under too much tension or force. Additionally, it is important to keep the chain clean and oiled in order to help it perform optimally and last for a long time.
When should you throw away a chainsaw chain?
It’s important to throw away a chainsaw chain when it is worn out or damaged. Signs that a chain is in need of replacing include teeth being chipped, mushroomed or worn, as well as if they become bent.
If the chain is not cutting efficiently, such as getting stuck in the wood it is cutting, this is also an indication that it needs replacing. Additionally, if the chain is producing a significant amount of smoke or unusual amounts of vibration when operating, it is likely time to replace the chain.
In general, it is a good idea to replace the chain when it no longer performs as it should and any damage is significant enough that it cannot be fixed easily.
Why won’t my chainsaw chain tighten?
Some common causes include: a malfunctioning chain tensioning system, a damaged or worn chain, or incorrect assembly of the chain.
The chain tensioning system can become warped or damaged, resulting in the chain not tightening properly. You should inspect the tensioner for any damage and replace it as needed.
The chain can also become worn or damaged if it has been over-used or if it is mismatched, too long, or too short for the saw. Inspect the chain to make sure it is the correct size and in usable condition.
Finally, the chain may not be assembly properly. Make sure that the chain is not twisted, caught, or overlapping. It should fit around the bar in the groove and be tightened with the tensioning screw.
If after inspecting and attempting the above repairs, your chain is still not tight, you should take your saw to a professional for further diagnosis.
