Raising a college dorm bed is typically as simple as pushing and lifting it from the bottom. Most college dorm beds are adjustable height, so you simply just need to unlock the legs, put your weight into the frame and lift it up.
To lower the bed frame, push it down lightly with your body weight and then use either both hands or one hand and a foot to push down (depending on the weight) until it is at the desired height. There are typically different locking mechanisms and settings for height, so make sure you adjust the locking pin.
As an added step, you can use a leveler beneath one of the legs to ensure that your bed is at the exact height you want.
Can you adjust dorm bed height?
Yes, it is possible to adjust the height of a dorm bed. Most dorm beds have adjustable legs that can raise or lower the bed without difficulty. Most adjustable legs have several different levels of height, allowing you to find just the right height.
If your bed doesn’t have adjustable legs, however, you can still easily adjust the height of your bed with a few materials. All you’ll need is a few cinder blocks, wood planks, and a saw. First, measure the height of your bed and determine how many cinder blocks you need to make it higher.
Then, saw the planks to the same size as your bed frame and lay the planks atop the cinder blocks to form a platform, on which you can place your mattress. With this technique, you can easily adjust the height of your dorm bed and make it as comfortable as you want.
How can I make my bed higher?
Depending on the bed frame that you have. One option is to purchase bed risers, which are raised blocks that go under the feet of your bed frame, lifting the bed higher off of the ground. Risers typically come in packs of four and are widely available for purchase online or at many home improvement or furniture stores.
Another option is to purchase a bed frame with taller legs or posts, replacing the existing frame with one that has more height from the floor. Additionally, if you have a box spring mattress, you can purchase a bed frame that does not require a box spring, allowing you to get the additional height from the floor that you desire.
How do you use dorm bed risers?
Dorm bed risers are an easy and effective way to create more storage space under the bed. They can also be used to raise the bed so it’s easier to get in and out of. To use dorm bed risers, you should start by positioning the bed in place where you want it.
Often, it’s best to put the bed near the center of the room, so the risers will be evenly spaced. You’ll then need to decide how high you want the bed to be. Dorm bed risers typically have different sets of heights to choose from, ranging from 2 to 5 inches.
After selecting the correct height, you’ll place the risers in each corner of the bed, making sure that they are secure by tightening the screws on the bottom. Finally, you’ll want to place a board on top of the risers and your bed frame.
This is necessary to ensure the bed frame and mattress don’t slip off the risers due to the extra height.
Do I need bed risers for college?
Whether or not you need bed risers for college depends on your particular space and setup. College dorm rooms typically have limited space, so if you need to maximize the storage or sleeping area that you have, then bed risers can be a great option to think about.
Not only do bed risers give you added space, but they also raise your bed off the ground making it easier to get in and out of, and easier to vacuum underneath it. Bed risers also allow you to use the space underneath your bed for a variety of storage needs like shoe holders, extra blankets, or small furniture items.
If your dorm room has enough space to store all of your items without needing to use the area beneath your bed, then bed risers may not be necessary. Consider the size of your room and the amount of storage you require when deciding whether or not you need bed risers for college.
Can I stack bed risers?
Yes, you can stack bed risers. Stacking bed risers is a great way to get a little extra height without having to buy multiple bed risers. When stacking, you would put one bed riser on the floor and then stack the other(s) on top of the first one with the post hole lined up with the hole in the one below it.
This will give your bed a boost that it would not have if only one bed riser was used. However, it is important to be aware of the size and weight of your bed frame when stacking. Make sure that the risers you are using can handle the weight of the bed frame and that you can safely stack them.
It is recommended to check with the manufacturer for weight specifications for their risers before stacking.
How do I turn my bed into a loft?
Turning your bed into a loft can be a great way to free up some space and make your bedroom more functional. Depending on the type and size of bed that you have, you will need to take different steps.
The first thing you should do is assess the bed you have. Make sure that it is safe to loft; most standard-sized, metal or wooden frames are already designed for lofts. If you have a bed that is made for a box spring, then you will need to make sure that the frame is solid and not likely to wobble, since box springs tend to make the bed more unstable when lofted.
Once you know that it is safe to loft your bed, you will need to gather the right materials. You will need strong, stable supports. You can purchase lagers like bed risers, which you can use to loft the bed and make space underneath.
If you don’t want to invest in risers, you can also use heavy-duty boards and cement blocks.
Be sure to measure your bed frame carefully before cutting the boards or purchasing lagers, to make sure they are the right size. Additionally, if you’re using boards and cement blocks, it is important to make sure that the setup is secure and that the bed won’t budge or wobble.
Once you have your supports securely in place, the final step is to secure the bed to the wall. This step is probably the most important, since it will keep your bed from tipping or falling. Using lag screws and wall anchors, attach the bed frame to the wall for ultimate stability.
And that’s it! With these steps, you’ll have your bed lofted in no time.
What can I use instead of bed risers?
Depending on the purpose they were originally intended to serve. One option would be to use furniture slides, which are usually plastic discs that are placed beneath each corner of the bed frame, allowing it to be easily moved.
This could be a useful way to raise the bed’s height, while still being able to move it easily when needed.
Another potential solution would be to use blocks or pieces of wood to raise the bed if you need a bit more height than what the furniture slides can provide. This is a particularly cost-effective option, as wood can often be found for little or no cost, although you will need to ensure that the wood is properly secured and does not move around when weight is placed on the bed.
Finally, for those who require an even greater increase in bed height, adjustable bed risers may be an option. These are basically frames that can be adjusted to different heights and then placed securely underneath the bed frame, creating a larger overall height than furniture slides or wood blocks.
This can be a great option for those who require extensive adjustments and need a relatively permanent solution.
How tall is a typical dorm bed?
The typical height of a dorm bed is 36 inches from the floor to the top of the mattress. Depending on the bed frame, mattress, and bed skirt, the overall height of the bed may be a few inches taller.
Extra-long dorm beds are sometimes available, which typically measure 80″ long and 36″ tall. In addition, some bed frames and bed skirts can be configured to provide extra height to the bed, often raising it to around 41 inches or more.
Why do colleges use twin XL beds?
Colleges typically use twin XL beds in dorm rooms because they take up less space than a standard full- or queen-sized bed and are better suited for limited dorm room spaces. Additionally, they can accommodate taller people more comfortably than a regular twin bed.
Twin XL beds are longer than a standard twin bed, measuring 39 inches wide by 80 inches long, with extra length that allows for taller people to sleep comfortably. Another benefit is the mattress sets for these beds are typically cheaper than any other size and the two beds can be pushed together to make one larger bed, which makes this size ideal for shared dorm rooms.
With a twin XL bed, two people can also sleep separately in a shared room, which increases the comfort level for both individuals. Lastly, twin XL beds are the same width as a standard twin bed, but with the extra 5 inches of length, it gives an adult extra space to stretch out and have a more restful sleep.
How can I raise my 3 foot bed?
One option is to purchase a bed frame with adjustable legs. These bed frames usually come with adjustable legs that are between 6 and 9 inches, so you can raise the bed to your desired height. Another option is to purchase cinder blocks or other heavy and sturdy objects to place beneath the feet of the bed.
This will raise the bed 3 feet, but make sure to distribute the weight evenly around the bed to ensure it is balanced and not too unstable. You could also add bed risers, which are individual platforms that you can place beneath the feet of the bed for secure, additional height.
Finally, you could use a bed bridge, which is a platform that extends the length of the bed, allowing for extra storage space for items such as shoes and books, as well as raising the height of the bed.
How high can you raise a bed?
The height you can raise a bed depends on the type of bed frame and mattress you have. Most standard bed frames and mattresses can be raised from 6 inches up to 24 inches, depending on the support system and frame.
Raising the bed higher than 24 inches usually requires special types of frames, such as platform or adjustable bases. These can raise your bed to heights up to 42 inches or even higher. Higher beds are also easier to get out of, and are particularly beneficial for those with accessibility issues.
Additionally, raising a bed can create extra storage space underneath, making it an excellent solution for those who live in a small space.
Do colleges provide bed risers?
Colleges generally do not provide bed risers, as they would burden the university with the added expense of continuously replacing them due to damages or theft. However, as a college student, you are able to purchase bed risers to increase their bed’s height if they desire.
These risers are a great way to try and maximize already small dorm spaces and can help to keep the room organized by creating more space underneath the bed where you can store items. Bed risers typically range in cost but can be found for a relatively inexpensive price online or at home stores.
Additionally, bed risers come in a variety of heights, colors, and materials for you to choose from.
How can I lower the height of my bed?
If you have a standard wooden bed frame, the simplest way to lower the height is to replace the frame slats. Most standard bed frames come with 6-7 pieces of wood that have a hole in the middle, and can be removed from the frame.
By replacing these slats with shorter pieces, you can lower the height of the bed.
If you have metal frame, the only way to lower it is by adjusting the bolts that hold the metal frame pieces together. You’ll have to find the bolts at the bottom of the bed frame, and then adjust them to achieve your desired height.
If you don’t feel comfortable doing either of these things yourself, you can always look into adjustable bed frames that can be converted to the height you want. These are usually more expensive, but they come with an adjustable bed frame that can be changed in height at any time.
Can I cut down a loft bed?
Yes, you can cut down a loft bed. Depending on the type of loft bed you have, cutting it down will require a few different tools. If you have a wooden loft bed, you’ll need a power saw and measuring tape to accurately cut the bed to the desired size.
If you have a metal loft bed, you may need a hacksaw or grinder to cut the bed to the desired size. Before starting to cut, it’s important to measure twice and cut once – a mistake can be difficult and costly to undo.
Additionally, wear protective gear and make sure you’re in a protected, well-ventilated space when cutting wood or metal.
