Setting up a Dewalt portable table saw requires carrying out a few key steps. First, you should unpack the saw and all its components and check to make sure that all the hardware is there, as well as a manual.
Then you’ll want to place the saw on a secure, level surface to ensure that it won’t move during operation. Next, follow the manual’s instructions for installing the rip fence and making any necessary adjustments to the saw’s components for accurate cutting.
Then move on to attaching the blade by making sure that it is properly aligned and secured, and adjusting it for the proper cutting height. Once the blade is set, it’s time to power up the saw and check whether all its components are working properly.
And lastly, take the time to familiarize yourself with the saw’s features and any additional accessories (like a dust collection system) that you may have purchased with the saw, along with the safety procedures for operating the saw.
- How do you put a Dewalt saw stand together?
- How do you assemble a table saw stand?
- How do you use a jobsite table saw for fine woodworking?
- What is a jobsite table saw?
- Which way do you feed wood into a table saw?
- Whats the difference between a miter saw and a table saw?
- Can DeWALT DWE7485 use dado blades?
- What size blade does a Dewalt DWE7485 use?
- Can I use an 8 inch dado blade on a 10-inch table saw?
- Can a Dewalt table saw accept a dado blade?
How do you put a Dewalt saw stand together?
Putting together a Dewalt saw stand is a relatively straightforward process. The first step is to assemble the base of the saw stand using the two legs, two feet, two wheel assemblies, two wheel covers, and the mounting bracket that comes with the kit.
Start by laying out the two legs with their wheel assemblies facing out and their wheel covers facing in. The mounting bracket should then be attached to the top of the legs. Using the provided screws, nuts, and washers, attach the wheel assemblies to the lower part of the legs and secure them in place with the nuts and washers.
Next attach each of the feet by sliding them into the slots at the top of each leg. After all the parts are in place, use the provided fasteners to screw the feet onto the legs.
With the base complete, assemble the main portion of the saw stand. Begin by fastening the main center bracket onto the back of the main upright post. On either side of the bracket, insert the two steel brackets that will secure the main saw working surface into the holes in the back of the main post.
Its a good idea to make sure that the nuts, washers, and lag bolts are tightened securely before attaching any other components. Then insert the two supports into each side of the main upright post before attaching the saw support rails to the underside of them.
Secure the saw support rails with the provided lag bolts and washers.
Next, attach the side brackets on each end of the saw stand. Slide the two side brackets onto each side and secure them using the provided fasteners. Finally, the two sets of table saw clamps and jigsaw clamps should be inserted into the pre-drilled holes in the side brackets and the provided lag bolts used to lock them in place.
Once everything is assembled and fastened in place, the Dewalt saw stand is ready for use.
How do you assemble a table saw stand?
Assembling a table saw stand is a simple task that can be done in a matter of minutes. Below are the steps to put together a typical stand:
1. Remove all parts and hardware from the box. Lay the pieces out flat on a clean, level surface.
2. Assemble the frame according to the manufacturer’s instructions. You will typically use four bolts to attach the pieces together.
3. Attach the legs to the frame. Line up the holes in the legs with the holes in the frame and secure with four bolts.
4. Attach the trays, if included, to the frame. Place the trays onto the frame and secure with four bolts.
5. Attach the saw mount. Place the saw mount into the frame above the trays and secure with four bolts.
6. Place the table saw onto the mount. Make sure the saw is firmly seated and locked into place.
7. Tighten all of the bolts on the stand. Use a wrench or tools recommended by the manufacturer.
Once completed, you should have a sturdy, reliable table saw stand ready to support your woodworking projects.
How do you use a jobsite table saw for fine woodworking?
Using a jobsite table saw for fine woodworking entails many of the same techniques as using a regular table saw. The main difference is that you must be more precise due to the smaller size of the saw.
You must also use the proper blades and speed settings for each material and make sure that you are positioned correctly to make the cut you need.
To begin, make sure to check the saw for proper set up by checking for levelness, the secureness of the hold-down clamps, and safety features such as splitter guards. Then, choose the correct blade and speed setting for the saw and install it on the saw.
Position the saw so that it is aligned with the cut line you want to make and make sure to double check that you are positioned correctly before proceeding.
Once you are properly positioned, begin making the cut. For a finer cut, reduce the feed rate to match the speed setting of the saw. This will keep the wood from binding and tearing, resulting in a cleaner cut.
Also, make sure to keep both hands on the wood and use a light grip on the wood with the first hand to keep it secure. For the second hand, use a guide fence, push stick, or feather board to keep it secure and straight, then guide it through the saw with the push stick or feather board.
Once your cut is complete, turn the saw off and inspect the quality of the cut. If there is tear out or burring, you may need to adjust the blade or the speed setting or reposition the wood to make sure it cuts properly.
Make sure to clean the saw and remove any sawdust to ensure it works properly for the next cut.
With a few adjustments and precautions, you can use a jobsite table saw for fine woodworking. By utilizing the proper steps to use the saw and make sure safety features are up to date, you can create beautiful and intricate woodworking projects.
What is a jobsite table saw?
A jobsite table saw is a portable saw that can be used to make precise cuts in lumber and other materials. Unlike regular stationary saws that are kept in a shop and remain stationary, these saws are designed to be transported, set up, and quickly break down.
They come with a range of features such as roller stands, dust collection bags, and saw fences. A jobsite table saw may be used to create precise miter joints, rip boards, cut large panels, groove, and even make angled cuts in lumber.
They are especially beneficial for carpenters, woodworkers, and do-it-yourselfers who need a saw that is easily movable, but able to accurately and effectively cut wood.
Which way do you feed wood into a table saw?
When feeding wood into a table saw, it’s important to do it carefully and correctly. It is generally recommended to start by pushing the wood into the saw blade away from you with both hands. Use your dominant hand to hold the workpiece firmly at its leading edge, while keeping your non-dominant hand slightly behind it, on the trailing edge.
Pull toward you using pressure that is consistent and gradually increasing. As the blade grabs the stock and pulls, keep both hands firmly in contact with it, maintaining a secure grip until the trailing edge is past the blade.
As the saw blade continues to rotate, it may tend to kick the workpiece back or up; if this happens, lift your hands to avoid getting pulled into the saw. Once the stock has been fed past the blade, you can decrease the pressure applied to the leading edge.
Keep your hands from the blade at all times and do not try to stop the cutting action by pushing the workpiece with your hand.
Whats the difference between a miter saw and a table saw?
A miter saw and a table saw are both tools that are used to make precise cuts in wood, but they perform very different functions. A miter saw is designed for making cross cuts, which are cuts that are perpendicular to the grain of the wood.
It is a stationary tool that uses a circular saw blade mounted on an arm that moves back and forth in a chop saw motion to make the cuts.
A table saw, on the other hand, is designed for making rip cuts, which are cuts along the length of the grain of the wood. It includes a large, flat, powered tabletop with a spinning circular saw blade that comes up through the center.
The motor drives the saw blade and allows you to adjust the depth and angle of the cut.
Both saws are incredibly useful, but they serve different purposes. A miter saw is great for making cross cuts, such as for making miter joints, picture frames, moldings, and trim. A table saw is useful for making rip cuts, such as for cutting down large pieces of wood into smaller ones, making dados, rabbets, and more.
Can DeWALT DWE7485 use dado blades?
Yes, the DeWALT DWE7485 Table Saw can use dado blades. This particular saw is a powerful tool perfect for completing a variety of woodworking projects. It comes with a heavy-duty 15-amp motor with a 5,800-RPM speed for maximum cutting power and accuracy.
The 24-tooth carbide blade is perfect for standard woodworking tasks. It also has an 2-1/2 inch dust collection port to keep your working area tidy and dust-free. Additionally, the DWE7485 is capable of using a variety of dado blades.
The arbor size is 5/8 inch, and the maximum cutting depth is 3/4 inch. With the right setup, you can easily use dado blades to create a variety of complex and intricate joinery cuts. Ultimately, this saw is an excellent tool option for any woodworker looking to take their projects to the next level.
What size blade does a Dewalt DWE7485 use?
The Dewalt DWE7485 uses 8-1/4 inch blades for a range of cut depths. This size blade works well for cutting a variety of material thicknesses, from thin plywood to thicker hardwoods. It has a powerful motor, 15 amps and a no-load speed of 5,800 RPM, which makes it perfect for both light-duty and heavy-duty construction and repair jobs.
The kit comes with a 24-tooth carbide-tipped blade for rip cuts, a 24-tooth carbide-tipped blade for crosscuts, a dust port adaptor, a smart guard, and a fence which dials in cut accuracy of up to 1/32 inch.
The blade is also adjustable up to 2-1/2 inches deep to make thick cuts on thick material. This Dewalt saw is a great addition to any toolbox and will make a range of household and workshop cutting tasks a breeze.
Can I use an 8 inch dado blade on a 10-inch table saw?
Yes, you can use an 8 inch dado blade on a 10 inch table saw, but you have to make sure that your saw is rated for the size of the dado blade you are using in order for it to work properly. 8-inch dado blades create wider dadoes than 10-inch saws can typically accommodate, so you may need to adjust the size of your dado blade based on your table saw.
It is important to note that the arbor on your table saw must match the size of the arbor hole in the dado blade in order for it to work properly. Additionally, you should always make sure that the dado blade is properly balanced and securely mounted before you operate your saw.
Improper mounting and installation of a dado blade can cause harm and injury. Finally, it is a good idea to check the user manual and consult the manufacturer of your table saw to ensure it is compatible with the size dado blade you are using.
Can a Dewalt table saw accept a dado blade?
Yes, a Dewalt table saw can accept a dado blade. Dado blades are specific types of saw blades that are used to make a wide, flat-bottomed groove in a piece of wood. Many Dewalt table saws come with a dado throat plate that allows the use of a dado blade.
The throat plate enables the user to adjust the opening for the dado blade so it fits securely. If your Dewalt table saw does not come with a dado throat plate, you can purchase one from a local hardware store or from Dewalt’s website.
It is important to note that because dado blades have larger diameters than traditional blades, they require considerably more power, so you may need to consider purchasing a saw with a higher amperage motor to accommodate a dado blade.
Additionally, some dado blades may require a large arbor hole, so you should make sure to check the specifications of the blade before purchasing.