Taking apart an Intex pool requires some careful preparation to ensure it is done safely and the pool is not damaged. First, if the pool is still filled with water, it needs to be emptied completely.
Depending on the pool’s size and how you intend to store the pool components after taking them apart, you may decide to drain the pool into a storage container. You then need to deflate the pool walls, but take care to not puncture them as you do so.
Once the walls are deflated, use a screwdriver to undo any screws that are holding the walls together, and carefully pull them apart. At this stage, you may be able to easily remove the filter and flow control components along with skimmer or other accessories.
To remove the pool liner, start from one end, unzipping it and working your way around to the other end of the pool. Finally, remove any other components that have been attached with screws or any other means.
When taking apart your Intex pool, it is important to remember to save all the components as you take them apart. This will make it much more simple to set it back up when you need it again.
How do I fold my Intex pool for storage?
Folding and disassembling your Intex pool for storage is relatively straightforward. However, you should always make sure to follow the manufacturer’s instructions, as different pool models may require different folding and disassembling techniques.
The entire process of folding and disassembling your Intex pool should take around 2 hours.
Before folding and disassembling your pool, you should thoroughly clean it and make sure it is completely empty and dry.
To start folding your Intex pool, lay down the tubing on the ground and then start to pull the sides of the pool outward and downward. Make sure to pull the sides away from each other, not towards each other.
Then, proceed to fold up the pool for storage.
Once the pool is folded up, maneuver it onto a flat surface and secure it with straps and/or weights. This will prevent it from opening back up during transportation or storage.
Next, disassemble your pool frame by loosening and removing each individual frame leg. Depending on your pool model, the frame leg sleeve might need to be flipped from the “In” position to the “Out” position.
It should now be easy to take the frame legs apart and lay them out for storage.
Finally, take the pool cover and fold it up for storage. Make sure to completely dry it before folding it. This will help keep it in good condition and make sure that no mold or mildew builds up while in storage.
Once you have completed all these steps, your Intex pool should be securely folded and disassembled, ready for storage.
How do you dismantle an above ground pool?
To dismantle an above ground pool, you will need to complete a few steps, which typically include the following:
1. Remove debris from the pool: Before attempting to dismantle the pool, you should remove any debris that has collected on the pool’s surface and in the filter system. This includes leaves, insects, and algae.
2. Drain the pool: All of the water needs to be emptied out before dismantling the pool. Connect a garden hose to the drain plug and allow the water to seep out.
3. Disconnect the pump and filter system: Once all of the water has been drained, you need to disconnect the pump and filter system. Be sure to save all the parts, as you may need them when you set up the next pool.
4. Take apart the frame: Once the pump and filter system has been disconnected from the pool, you can begin to take apart the frame. Start with the upright poles, then move onto the braces and horizontal rails.
Take photos as you go so that you can remember how to assemble it back together.
5. Roll up and store the liner: Once the pool frame has been completely dismantled, you can take out the liner. Carefully roll it up and store it away until you are ready to reassemble the pool.
6. Clean and store the pool accessories: Clean the pool accessories and store them away until you are ready to use them in the next pool.
Following these steps should help to make dismantling an above ground pool a relatively painless experience.
Can I remove above ground pool myself?
Yes, you can remove an above ground pool yourself. However, it is a labor intensive and often messy process, and it is important to remember that safety should always be a priority and that it may be wise to seek professional assistance for assistance and safety advice.
Before attempting to remove an above ground pool, make sure you are clear on all of the local building regulations and that you have the necessary tools and equipment to do so safely. Additionally, you will need to ensure that you dispose of all of the debris correctly.
First, you will need to drain the pool of all water, making sure to keep the area clear of any excess water that may be draining. Second, you will need to disconnect the filters, pumps, and other components that may be attached and to remove the liner.
Once you have safely disconnected the remaining parts, it is time to start the process of breaking down and dismantling the components. Depending on the construction, this could involve cutting up walls, screws, and all remaining connections.
Once you have broken down the structure, it is important to clean and collect all of the debris, and dispose of it in the correct manner. This can involve using a tarp or bags to contain the debris to make sure that it is not spread when the debris is transported.
Remember, the job isn’t complete until all of the debris is properly disposed of.
It is important to note that this process is relatively long and often messy process and that it can be challenging for a single person to complete. It is highly recommended that you seek assistance from multiple people and/or professional assistance to assist in the process.
Additionally, you may want to check with local building regulations to ensure that you are not interfering with any local laws.
What tools are needed to take down above ground pool?
In order to take down an above ground pool, you will need a few basic tools to get started. These include a drill, screwdriver, hammer, measuring tape, ladder, and pliers. Additionally, you’ll want to make sure you have a shovel or two on hand to help discard the sand and dirt once the pool is disassembled.
A box or bag to store all the parts and accessories once they are removed is also a good idea. Finally, it is helpful to have a few plywood boards or thick pieces of plastic sheeting to cover the area once the pool and its components are removed.
How do you move an above ground pool without taking it apart?
Moving an above ground pool without taking it apart is possible, although it is not recommended unless you have the proper expertise and equipment on hand. Depending on the size and type of pool, you may need to enlist the help of a professional mover or pool installer in order to safely transfer the pool.
This is because the process can be dangerous and difficult to manage alone.
To start, you will need to partially empty your pool in order to reduce its weight and make it easier to move. Then, it is best to disconnect the pool from the pump and filter system, as well as any other accessories, before attempting to move it.
The next step is to use a jack or powerful winch to slowly lift the pool and support it as it is transferred. To make the transfer easier you may need to install temporary supports or braces depending on the pool’s size and shape.
Once you have the pool elevated enough that it is no longer contacting the ground, you can use a platform or furniture dolly to move it. It is important to ensure that the pool stays evenly supported as you move it, which may require having multiple people helping during the transfer.
Eventually you will want to lower the pool into its new location with the help of a jack and the same supports used to lift it. After that, you can then proceed to reconnect it to the pump and filter and fill it with water.
With the right expertise and planning, moving an above ground pool without taking it apart is possible, however it is always a good idea to contact a professional if you are not comfortable attempting the transfer yourself.
How do I take down my pool for the winter?
Taking down your pool for the winter is an important step in extending the life and integrity of your pool. It’s important to approach this task carefully, so that you can be sure your pool is properly cared for.
First, you will want to make sure the water in your pool has been properly treated with a heavy dose of chlorine, both to kill any lingering bacteria, and to provide an adequate level of protection from an algae bloom.
Second, remove any objects from the pool, such as ladders, slides and toys. Also remove any debris that may have accumulated in or around the pool throughout the season.
Third, drain the pool, either partially or completely depending on your setup. Use a hose, pool pump or submersible pump to pump out the water, and make sure to turn off your pool filter and pump when you’re done.
Fourth, winterize the filter, skimmer, and the pool pump itself. Remove any remaining water from the pump, filter and skimmer by blowing air out of an air compressor. You may also choose to use anti-freeze in the filter and pump.
Fifth, cover the pool. Choose a solid pool cover, preferably a tarp cover with enough weight and ability to hold in water and dirt if a winter rain occurs.
Finally, secure the cover to the pool – use water bags, pool cover clips, or cover seal to secure the cover and prevent debris and animals from entering the pool.
By following these steps, you can properly care for your pool in the off-season and protect it from damage.
How many years do above ground pools last?
The life expectancy of an above ground pool will vary depending on the type of pool and maintenance it receives. Generally, basic metal-frame pools will last an average of 3-5 years, while those with metal or resin frames have a life expectancy of 7-10 years or more.
Higher-end above ground pools, such as those with resin frames, solar heaters, and quality pool liners, may last up to 15-20 years. In addition, proper pool care and maintenance plays a significant role in the life expectancy of any pool.
Keeping the water balanced and treated, as well as caring for the pool pump, filter, and other equipment, can help to ensure that the pool lasts its expected lifespan.
How far down should I drain my above-ground pool for winter?
When draining your above-ground pool for winter it is best to lower the water level below the skimmer and the return line. The best approach is to drain the pool to approximately 12 to 18 inches below the skimmer and returns.
This prevents freezing of the plumbing connected to the pool which could lead to serious damage. When draining above ground pools, it is important to have some water still in the pool to help protect the pool walls.
If your pool has a wall cover, the cover should also be removed if you plan on draining the pool below this 12-18 inch recommended water line.
Drainage must be done carefully and slowly. If the pool is drained too quickly, the liner can shrink or become loose, which can cause wrinkles or tears. To avoid this, you should use a pool drain pump to reduce the water pressure and drain the pool gradually.
When draining your pool, it is also important to make sure that debris such as leaves and dirt are cleaned out of the pool as it is being drained so that they do not get stuck to the bottom of the pool.
After draining the pool and cleaning off all debris, it is important to add winterizing chemicals to prevent algae growth over the winter. A final water line should be established before adding the winterizing chemicals.
All in all, it is best to drain your above-ground pool down to 12 to 18 inches below the skimmer and returns. This will help to protect the pool’s plumbing from freezing, and should be done carefully and slowly with the use of a drain pump.
Additionally, it is important to make sure that all debris is cleared out of the pool as it is being drained, and winterizing chemicals should be added after establishing a final water line.
How long do Intex pools last?
The lifespan of an Intex pool is dependent on a few factors such as how well it is maintained and how often it is used. With proper maintenance, including regular cleaning and balancing chemicals, an Intex pool can last for many years.
Most Intex pools come with a lifetime warranty, which suggests that the pool will last for its manufacturer-stated life span if it is maintained properly. It is also important to keep in mind that different types of Intex pools have different life spans.
Steel-framed pools generally last longer than their inflatable counterparts, while cartridge filters tend to need replacing every 3-5 years. All in all, with the proper care and maintenance, an Intex pool can last for an extended period of time.
How do I drain the bottom of my Intex pool?
In order to properly drain your Intex pool, you will need to start by turning off any water pumps that are hooked up to your pool. Once the pumps are shut off, you will need to locate the drain plug on the bottom of the pool.
To do this, you need to find the lowermost point on the pool so that you can properly access the plug. Depending on the size and shape of the pool, you may need to use a long-handled tool to reach the plug.
After locating the plug, you can unscrew it and place your garden hose or drainage hose onto the end. Position the hose so that it points towards a vessel or other body of water that can easily collect all of the draining water.
Next, carefully move the pool liner away from the drain hole, ensuring it will not be clogged with debris or water.
Once the hose is in place, you can go ahead and turn on the pump to start draining the pool. As the pool drains, keep an eye on the water level and periodically check the drain plug and hose to make sure they are still attached properly and that the flow of water is not obstructed.
This will help you to avoid any overflows or accidents. When the water level is below the bottom of the pool, you can turn off the pump and remove the hose from the pool. Make sure to securely tighten the drain plug before you refill your pool.
What do you do with your pool in the winter?
In the winter, I keep my pool closed and just let it sit dormant. This means I cover the pool with a winter cover, turn the filtration system off, and stop maintaining the chemical balance of the pool.
This helps protect the pool, and keeps dirt and debris out. I also use a pool winterizing kit which includes algaecide and other pool chemicals to balance the water and protect the pool from algae growth and other potential problems.
After the winter is over and the temperature starts to increase, I start the maintenance process again. This includes uncovering the pool and clearing out any debris, checking and replacing the pool filter, and testing and adjusting the chemical levels of the pool.
Do I need to lower the water level in my above-ground pool for winter?
Yes, it’s generally recommended to lower the water level in your above-ground pool for the winter to prevent damage due to freezing temperatures. Most pools will tell you the appropriate water level on the inside wall of the pool.
When emptying your pool, you should never completely empty the pool as this puts a great amount of stress on the structure of the pool. Instead, it is recommended to reduce the water level to at least 6 inches below the skimmer.
This will ensure that any potential ice expansion won’t stress the vertical walls and cause the pool to collapse. Additionally, it’s important to drain the hoses and winterize the filter and pump, if desired.
Lastly, make sure to remove pool ladders, poles, toys, and handrails before the winter season.