Using Ardent Reel Cleaner is a quick and easy way to help maintain the longevity of your fishing reels. To get started, you’ll need to remove your reel from the rod, making sure you keep all of the screws, nuts, and bolts together in a safe place.
Using a rag, wipe off any debris or dirt from the surface of the reel. Next, dunk the reel into a bucket of Ardent Reel Cleaner, which is specifically engineered to dissolve oil, dirt and other contaminants that can damage your reel.
Allow the reel to soak for two minutes, and then swirl it around in the bucket. After you have given the reel a good swirl, take it out of the bucket and thoroughly rinse it with water. Using a brush, scrub away any additional dirt or debris with a soft bristled brush.
Once the reel is clean, allow it to air dry before reassembling it to your rod. Following these steps should help your fishing reels perform up to their optimal levels and help keep them in top shape for years to come.
How do you clean a fishing reel?
Cleaning a fishing reel is an important part of maintenance and can prolong its life. Here are some steps to follow for cleaning a fishing reel:
1. Unscrew the drag knob and then unscrew both the reel’s side plates.
2. Remove the spool, spindle and drag washers from the main section of the reel. Place these parts in a clean basin or bucket filled with warm, soapy water.
3. Use a soft cloth and warm water to thoroughly clean the main body of the reel. Make sure to remove any dirt and debris that may have collected on the moving parts.
4. Dry the parts that were in the water with a soft, clean cloth.
5. Inspect the parts for signs of wear and replace any parts that are damaged.
6. Add a few drops of light oil to the spindle, drag washer, and moving parts of the reel.
7. Place the parts back together and reassemble the reel.
8. Grease or oil the exposed areas of the reel that are visible once assembled.
9. Check the reel is working properly by spinning the handle and engaging the drag washer.
By following these steps you should be able to clean and maintain your fishing reel so it will last for many more years.
Can I use wd40 on my fishing reel?
It is not recommended to use WD-40 on your fishing reel. WD-40 is a degreaser and solvent that is traditionally used as a lubricant. It can break down the oils and greases in your fishing reel, which can lead to corrosion and can reduce the overall lifespan of the product.
Additionally, water and moisture can enter your fishing reel through the lubricant, leading to oxidation. WD-40 can also lead to dirt and debris buildup on the reel and can damage internal components.
Instead of using WD-40, it is recommended that you use a reel oil specifically designed for fishing reels. Reel oils are specifically formulated to lubricate fishing reels without causing damage. The oil is also designed to repel water, so it can help protect your reel from corrosion.
Additionally, reel oils come with special additives that help keep the reel running smoothly.
What can I clean my fishing reel with?
When it comes to cleaning a fishing reel, the best approach is to start with a microfiber cloth to wipe away any dirt and debris that may have accumulated. Then give the reel a good long soak in warm, soapy water and use a soft-bristled brush to scrub away any extra grime or dirt.
Be careful not to use a wire brush as this can damage the reel.
Once the reel is clean, rinse it off with fresh water and then dab it dry with a microfiber cloth. For a deeper clean, you can use a cotton swab dipped in rubbing alcohol to get into any tight spaces.
Make sure that you rinse this off with fresh water afterwards.
It is also important to lubricate the inside of the reel with special reel oil after cleaning to ensure maximum performance. Once the cleaning and lubrication are complete, simply wipe away any excess oil and store the reel in a cool, dry place.
Regular cleaning and maintenance is the best way to keep your fishing reel in top shape.
What breaks down salt corrosion?
Salt corrosion, also known as chloride corrosion, can be broken down by using a method known as cathodic protection. Cathodic protection is an electrochemical technique that forces the metal to corrode in a controlled fashion, which helps to stop corrosion at its source.
The cathodic protection method works by connecting an anode to the metal that is being corroded. This anode then acts as a sacrificial metal that takes the brunt of the corrosion, thereby protecting the metal from further damage.
Cathodic protection can also be used to inhibit corrosion on existing metal structures by wrapping the metal in a protective coating or by applying specially formulated coatings. Additionally, some corrosion inhibitors, such as coatings and creams, can be applied to prevent chloride corrosion.
Are Ardent reels made in USA?
No, Ardent reels are not made in the USA. The company is headquartered in Tennessee, but the manufacturing of their reels takes place overseas. Currently, Ardent reels are manufactured in China, as the company prides itself on creating high-quality reels that are competitively priced for anglers.
While Ardent uses American-made components and materials in all of their reels, overseas production enables the company to keep their prices competitive. In addition, Ardent reels are rigorously tested before they are released to consumers in order to ensure a high-quality, dependable product.
What fishing reels are made in the United States?
There is a wide variety of fishing reels made in the United States. Many of the leading brands of freshwater spinning and baitcasting reels, such as Abu Garcia, KastKing, Quantum, and Shimano, are either sourced or manufactured in the US.
Additionally, there are many smaller, lesser known brands produced in the USA, such as Lakco Fishing, Ugly Stik, and Bass Mafia.
Fly-fishing reels are often made in the USA as well. Popular brands like Lamson, Ross, Orvis, and Scientific Anglers are all located in the United States. Many of the vintage reels available, such as Hardy and Pfleuger, are still produced in the United States.
Saltwater reels are also made in the USA, with many of the brands mentioned above offering a selection of offshore models. Daiwa, Penn, and Abu Garcia are among the more popular brands in the saltwater reel market.
Overall, the United States has a large selection of fishing reels to choose from, with a variety of brands offering different styles and sizes for freshwater, saltwater, and fly-fishing.
Are ardent rods good?
The answer to whether ardent rods are good largely depends on what you are looking for in a rod. Ardent rods are relatively inexpensive and good for beginner anglers and anglers on a budget. They aren’t as good as some of the more expensive rods on the market, but they are budget-friendly and offer decent performance for the price.
They offer a wide range of options in size and power, so you can easily find a model that suits your needs and budget. However, if you fish a lot or are looking for the best performance, you might want to look at investing in a more expensive model.
Is WD-40 good for cleaning fishing reels?
Generally, WD-40 is not good for cleaning fishing reels. WD-40 is a product designed to lubricate bearings and hinges and is not designed for cleaning. While it can be used to remove saltwater spray from fishing reels, WD-40 is not recommended as the main cleaning agent because of its petroleum base.
Using petroleum-based products on saltwater will over time corrode the metal or plastic components of the reel. It is best to use a specialized cleaning and lubricating product specifically designed for fishing reels to maintain their long-term performance.
Additionally, we recommend cleaning and lubricating a fishing reel every month or so depending on the level of usage. There are also a few home remedies, such as baking soda and white vinegar, that can be used to remove salt and grime from fishing reels if a specialty product isn’t available.
Is Vaseline a good lubricant for fishing reels?
Yes, Vaseline can be a good lubricant for fishing reels. It is an inexpensive and readily available solution that can help keep your fishing reels running smoothly. Vaseline is a petroleum jelly that is usually found in the first aid section of any store.
It acts as a protective layer that helps reduce friction and prevent corrosion on metal surfaces. It also helps to keep dirt and debris from accumulating on the reels. Additionally, it provides a thin layer of lubrication that helps reduce the amount of wear and tear on the bearings.
When applying Vaseline to your fishing reel, it is important to make sure that you only use a thin layer and do not apply too much, as this can cause the reel to work abnormally or even become damaged.
It is also important to make sure that you apply the Vaseline evenly to the parts and ensure that it does not get onto the line or other reel components. While Vaseline is a good lubricant for fishing reels, it should not be used as a substitute for regular cleaning and maintenance that should be done regularly.
What kind of oil do you use on a fishing reel?
The type of oil you use on a fishing reel depends on what type of reel you have. Spinning reels typically require lighter oils (such as WD-30 or 3-in-1 lubricants) while baitcasting reels usually need thicker oils (such as multi-purpose grease or reel oil).
You also want to make sure that the oil you choose is designed to not attract dirt or dust, as dust and dirt can damage the bearings in your reel if it gets inside the drag system. When lubricating the reel, a few drops of oil can go a long way, so it’s important to use a small amount of oil instead of over-oiling, as too much can be counter-productive and can cause more damage than help.
Additionally, it’s important to note that if your reel is using a ball bearing, then you will not be able to use oil on it as oil can damage ball bearings and you should use anti-fouling grease instead.
Is White Lithium Grease good for fishing reels?
Yes, white lithium grease is a great product to use for fishing reels. It is a popular, multi-purpose grease that is perfect for fishing applications due to its low-friction formula that helps ensure smooth operation for longer lasting performance.
It helps prevent metal-on-metal contact, which can decrease the efficiency of the reel, and protects it from oxidization and corrosion for prolonged life. It’s also waterproof, so it’s ideal for outdoor use.
Because it’s non-toxic and odorless, it won’t adversely impact the environment or the fish you are trying to catch. White lithium grease also helps reduce noise, which is useful when trying to be stealthy while out on the water.
It can be used on all types of fishing reels, so it’s a great all-around grease for any fishing enthusiast.
What can I use to oil my baitcaster?
Various types of oils can be used to oil your baitcaster, such as proprietary fishing reel oil, sewing machine oil, or even a light oil like mineral oil or 3-in-1 oil. Make sure that whatever oil you choose is safe for use in fishing reels and is not petroleum-based, as petroleum oils may break down some of the components of the baitcaster.
First, identify any grease or dirt buildup on the reel and use a clean cloth or soft brush to remove it. Once clean, hold the reel between your hands and turn the handle with the thumb of one hand and the the spool with the other.
This will allow you to identify any spots on the reel that are not spinning properly or have ceased to work altogether.
Once you’ve located any problem spots, put a few drops of oil directly on the parts of the reel where you feel friction. Give the reel a few spins to allow the oil to penetrate the inner workings of your reel, then repeat this process on all the different parts of the reel until it is oiled completely.
However, take care not to use too much oil as it can lead to a buildup of residue, which can further impede the reel’s performance.
Finally, wipe the excess oil off the frame of your reel using a clean cloth or paper towel, then buff with a soft cloth. This ensures that all of the excess oil is removed from your reel, preventing additional buildup.
Keeping your baitcaster clean and well-oiled is essential for ensuring superior performance, and following the steps mentioned in this answer will make the process fast and easy. Happy fishing!
How do you lube a Zebco 33?
Lubricating a Zebco 33 reel is a simple process, and can help maintain the functionality of the reel and ensure it is working properly. To lubricate the reel and ensure it is working correctly, begin by unspooling the line from the reel.
Then, apply a light work oil like WD-40, to the moving parts of the reel. This oil should be applied to the gears and ball bearings, as well as the handle and level wind mechanisms. After the oil has been applied, turn the reel handle several times in both directions to evenly distribute the oil before putting the line back onto the reel.
Finally, re-spool the line onto the reel, making sure that there are no line twists or knots. This will help to maintain the reel’s performance and extend its life and make it easier to use.
