Using drapery hooks with back tab curtains is a simple process. First, you will need to get the drapery rod of proper length and also hooks that will fit the size of the drapery panels. To hang the drapery panels, you will need a lined drapery panel with back tabs, drapery pins, and a hardware set, including a drapery rod, mounting hardware, and drapery rings.
Next, measure the distance between the wall and the drapery rod. Hang the drapery rod on the wall using the mounting hardware. Slide the drapery panel onto the drapery rod and adjust the panel to the desired length.
Then, insert the drapery pins into the back tabs of the drapery panel and slide the drapery hooks onto the drapery pin. Adjust the height of the hooks to determine the desired length of the drapery panels.
Finally, secure the drapery rings to the drapery rod and enjoy your new window treatment!.
How do you hang curtains with pleat hooks?
Hanging curtains with pleat hooks is a great way to give your window treatments a classic, tailored look. First, you will need to measure the width of your window and determine the size of the pleats that you want.
Then, mark the locations of the pleat hooks along the top of your curtains. Most curtain rods come with instructions on how far apart the pleat hooks should be hung. Once you’ve marked the locations, begin attaching the pleat hooks onto the top edge of the curtains.
It is important to make sure that the flat part of the pleat hooks is facing up. After the pleat hooks are securely in place, string the hooks onto the rod and use the secondary rod to hold the pleats in place.
To adjust the pleats, you can move the secondary rod up or down on the curtain rod. Once the preferred pleats are achieved, use the rod clips to hold the secondary rod in place. If you are using a long curtain rod, you may need to evenly space the pleat hooks around the circumference of the rod.
After everything is in place, hang the curtains and enjoy your new classic, tailored window treatment.
How do you attach drapery hooks?
Depending on what type of drapery hooks you have. Metal hooks or rings should be connected by screwing in a cup hook or eyelet screw into a wall or window frame, or you can use adhesive wall hooks. If your hooks have a back loop that can be removed, you can use removable adhesive wall hooks for a cleaner, temporary solution.
Fabric-covered drapery rings may have sewn-on loops or small holes that can fit over a curtain rod, allowing them to slide back and forth with easy. If your drapery hooks don’t have a loop to fit over a rod, you can attach decorative tiebacks to the hooks and loop these around your curtain rod.
Finally, you can also attach drapery hooks to a track or curtain rod. Many tracks have a small groove or clip where you can insert the hook and fasten it securely. For curtain rods, you’ll need to purchase clips or “S” hooks that go around the rods and attach to the drapery hooks.
Where should curtain hooks be placed?
Curtain hooks should be placed about six inches apart from each other. These should be placed at a height that is about 4-6 inches from the top of the curtains. When measuring from the top of the rod, make sure to measure 12-15 inches from the top.
You should use enough hooks so that the curtain will be evenly full when gathered. Additionally, when placing the hooks on the curtains you want to ensure they are placed on each pleat and the first pleat should be on the left side after the last pleat.
When hanging the curtains make sure that the hooks are placed in the right spot. If done incorrectly, the curtains will hang unevenly and won’t give the desired effect.
What do you call curtains that hang on hooks?
The curtains that hang on hooks are typically referred to as “Pinch Pleat Drapes”. Pinch Pleat Drapes are window treatments which have pleated fullness which is achieved by gathering the top of the curtain (or drapes) together typically in three or more pleats, which are then secured onto a pole or hooks.
The pleats are “pinched” at the top to create the fullness of the fabric. This type of drapery is popular with homeowners because it provides a classic, timeless look and is considered to be a more luxurious type of window treatment than standard curtains or drapes.
What kind of curtains do you use with clips?
Curtains with clips are usually lightweight curtains such as sheers, organzas, or chiffons. The clips allow for easy installation of the curtains as they can be directly attached to the curtain rod without the need for any additional hardware.
The ability to easily clip and unclip the curtains allows for convenient control of the window coverage, which can be helpful in summer months when more light needs to be let in. Curtains with clips are often used in high-traffic areas like school classrooms and libraries, where curtains need to be quickly changed or removed in between events.
They are also often used in households, as they are simple to install and can easily be changed to suit changing preferences. It should be noted that certain fabrics, such as heavy velvet or linen, may be too thick or dense to be used with clips, so be sure to check with the fabric supplier or manufacturer before purchasing the curtain.
How do you hang back tab drapes?
Hanging back tab drapes is a simple process that yields a polished and professional look. The first step is to measure the area they will be hung in order to ensure that the curtains fit properly. Then, iron out any wrinkles in the fabric and prepare the rod across the window or doorway where the curtains will be hung.
Next, insert the rod into the two top rod pockets on the back of the curtains. Grab each end of the curtain and pull it back so that the tabs flip over to reveal the rod slots at the top of the back.
Insert the rod into each of these slots and then straighten out the curtains. Finally, adjust the pleats or gathers on the curtain so they hang evenly and check to make sure that the curtains are at the appropriate length.
How full should tab top curtains be?
Tab top curtains should be full but not overly full. You should strive for a balance between creating a full and gathered look, while also allowing the curtains to lie flat. When hung on a rod, the curtains should be long enough so that the bottom of the curtains just touch the floor.
This allows the material to flow nicely, and avoids the curtains being too long or too short. Additionally, when closed, the curtains should be full and cover the entire window or door. The curtain’s fullness should also be balanced in that it should ripple when opened, and hang straight when closed.
Finally, when selecting the width of the curtain panels, you should choose panels that are 2 to 2 and a half times the width of the window or door. This ensures that the curtains are not overly full, while still providing full coverage.
What is the right way of hanging curtains?
The right way to hang curtains depends on the type of curtains you’re using and the type of window they’re going on. If you’re hanging curtains on a rod, make sure the brackets are secure and the rod is at least 4-6 inches wider than the window.
Hang the curtains as high as possible for a dramatic look, or lower for a more relaxed feel. When hanging curtains on rings or clips, attach the clips so they go from the floor to the top of the window, and make sure to leave enough space for the rod to slide.
If your curtains are sheer, consider hanging them from a tension rod that is tucked between the window frame and window trim. Finally, install tiebacks to help keep the curtains pulled back from the window, or use them to keep curtains open for a less formal look.
How do you measure drop for tab top curtains?
Measuring drop for tab top curtains is easy; all you need is a metal measuring tape and a pencil. First, measure the width of the window you are covering. Make sure to measure from the inside edge of each window frame and jot down the number.
Next, measure the length of the area you want the curtains to hang to. This measurement can be taken from the bottom of the window frame to the floor, or to the desired drop length. Make sure to measure in several parts to get an accurate measurement and write down the total.
Lastly, add 4 to 6 inches to the total length measurement to ensure the curtains will fit properly and hang efficiently. With the measurements of the width and length noted, you can begin shopping for tab top curtains.
How much longer should curtains be than window?
The length of curtains should depend on the look you want to achieve and the size of your window. As a general guideline, curtains should always be at least two times the width of your window. When selecting the curtain length, make sure to account for the height of the window; to ensure full coverage of the window and to add drama to the space, curtains should generally be at least 15-20 cm (6-8 inches) longer than the window.
For more formal windows, you may want to hang your curtains slightly longer (around 1-2 cm (1/2-1 inch) from the floor. If you have a window that’s located near the ceiling or a higher than standard window, you’ll have to make adjustments to the standard length so that you don’t take away from the window’s aesthetics.
Should my curtains touch floor?
Whether or not you should have your curtains touch the floor depends on a variety of factors. It is important to consider the size of your windows, the height of your ceilings, and the overall style of your home.
It is generally considered to be more aesthetically pleasing if curtains cover the entire window, from the top of the window to the floor. However, if you have a smaller window or lower ceilings, it might be better to leave a slight gap between the curtains and the floor.
This can be done either with a shorter curtain length or by hanging the curtains higher up on the wall. Another factor to consider is the amount of light you want in the room. If you prefer a more open, airy feel, then you might want to go with a shorter curtain, while if you want to create a more cozy atmosphere, then a longer curtain that touches the floor will do the trick.
Finally, the overall style of your home should be taken into account. A contemporary home may look better with a sleek, modern curtain that barely skims the floor, while a more traditional home may need something a little more dramatic and full length.
Ultimately, the decision is yours, so make sure to take all factors into consideration and choose the look that best suits your home.
What is back tab in curtains?
Back tab curtains essentially provide a neat, tailored look to the window by eliminating the need for a traditional rod pocket. With this type of curtain, the pocket or casing of the fabric is on the backside of the curtain, rather than on the sides or top.
This type of curtain is often used in contemporary and minimalist interior design styles. Installing back tab curtains typically requires only four hooks on either side of the window. The fabric is simply inserted into the back of the hooks.
Back tab curtains can also be hung onto a curtain rod if desired. Another advantage of back tab curtains is that they are easily adjustable. They can be positioned exactly where they need to be in order to block out light.
Back tab curtains are often used to provide privacy or to add visual interest to windows.
