Olympic Water Guard Clear Wood Sealer is a penetrating, waterproof, clear sealant that is compatible with all Olympic Stain colors. It is designed to seal and protect wood surfaces from weathering, fading, and general wear-and-tear.
It is easy to use and should be applied with an approved application tool, such as a brush or roller.
Before applying the sealant, make sure that the wood surface is free of dirt, dust, and other debris. Use a damp cloth to wipe off any residual dust and debris, then make sure the surface is dry and smooth.
If necessary, sand down any rough spots to create a smooth surface before applying the sealant.
Once the wood surface is prepped, mix the sealant well with a stir stick before applying it. Apply the sealant evenly and liberally with an even sweep using a brush or roller. Work the sealant into the wood by applying multiple coats.
Make sure to follow the manufacturer’s instructions for the amount of coats necessary for desired protection.
Once done, allow the sealant to dry before applying any additional coats. The sealant will create a glossy finish, protecting the wood from the elements. To clean and maintain the wood, use a mild soap and water solution.
This will keep the wood protected and looking great for years to come.
How many coats does the Olympic Water Guard have?
The Olympic Water Guard uses a three-coat system to protect the wood used in dock and deck construction. The first coat is a primer/sealer coat which is specially formulated to seal up the wood’s open pores and prevent the wood from absorption or leaching of water, preventing the wood from eventually rot or warping.
The second coat is a barrier coat which acts as a protective layer, helping to prevent UV rays, mold, mildew and other harmful elements from damaging the wood. It also prevents the splintering and cracking that can occur over time.
Finally, the third coat is a finish coat which is designed to provide a highly durable and aesthetically pleasing layer to the wood, providing a finished look.
Can Olympic Waterguard be applied to damp wood?
Yes, Olympic Waterguard can be applied to damp wood. However, it is important to note that the wood must be completely dry before applying any coatings. For best results, inspect the surface of the wood to make sure that it has no residual moisture.
If there is any moisture present, it is best to allow the wood to dry naturally or use a fan to help the drying process. Once the wood is dry, Olympic Waterguard can then be applied. It is important to understand that this product will not protect wood from damage caused by standing water, so it should be used as a preventative measure against water damage.
Additionally, be sure to follow all of the product’s instructions and ensure that the area is well-ventilated while applying.
Is Olympic Waterguard water or oil based?
Olympic Waterguard is a water-based sealer, designed to protect wood from moisture, mildew, and UV ray damage. It forms a protective barrier that is both breathable, allowing water vapor to escape, yet also impenetrable to water.
This makes it great for preventing rot and decay in any wood surface. It can be used in above or below grade applications and is designed for use on both interior and exterior wood surfaces, such as decks, siding and fences.
Moreover, it is easy to use and it has no fumes or odors – just apply the sealer just like paint, let it dry, and you’re done. This makes it a great solution for preserving the aesthetics and structural integrity of your wood surfaces.
What’s better than Thompson’s Water Seal?
A popular alternative to Thompson’s Water Seal is a product called Eco-Safe Wood Sealer, which is a water-based sealant designed to protect wood surfaces from water and protect the wood from damage from UV rays.
This product is an environmentally friendly waterproofing treatment that is free from volatile organic compounds (VOCs) and is safe to use around children and pets. This eco-friendly sealant is perfect for decks, walkways, patios, and other outdoor applications.
It also adds a beautiful finish to wood surfaces, which can enhance their appearance in exterior settings. Eco-Safe Wood Sealer is easy to apply with a brush, roller, or garden sprayer, is durable and long-lasting, and is available in a variety of colors to match your desired look.
How long does Olympic water seal need to dry?
It typically takes 24 to 48 hours for Olympic Water Seal to dry completely. Depending on the temperature, humidity, and weather conditions, it could take up to 3 days for the product to fully dry and provide complete waterproof protection for your outdoor project.
It is important to note that if the surface is pre-treated with a film-forming sealer, you should wait at least one week before applying Olympic Water Seal.
Is Thompson water Seal better than Olympic WaterGuard?
When it comes to comparing Thompson Water Seal and Olympic WaterGuard, it ultimately boils down to personal preference and individual needs. Thompson Water Seal is designed to protect and beautify outdoor wood surfaces, while Olympic WaterGuard is designed to provide a maximum level of protection against water damage and mold.
Thompson Water Seal is known as one of the most trusted and reliable stains and sealants for wood surfaces. It is water- based, and offers excellent protection from water and damage from humidity. It also provides a level of protection from UV rays and can last up to 8 years depending on the surface.
Thompson Water Seal also helps beautify the wood surface, creating a natural look with a transparent finish. One of the drawbacks is that the application can be difficult and requires multiple coats, and the final color can be unpredictable and inconsistent.
On the other hand, Olympic WaterGuard is designed to give maximum protection against water damage and mold. It is a water-based formula that penetrates deep into the wood, and provides a durable, waterproof finish.
It also offers protection from UV rays, and includes fungicides that prevent mold and mildew growth. Olympic Waterguard is much easier to apply than Thompson Water Seal and also offers a consistent, uniform finish.
However, it does not beautify the wood surface like Thompson Water Seal does, and is not recommended for cedar and redwood surfaces.
At the end of the day, it’s important to decide which product is best for your individual needs. If you’re looking for a stain and sealant that will provide protection and beautify the wood surface simultaneously, Thompson Water Seal is likely the best choice.
However, if you’re simply looking for maximum protection against water damage and mold, Olympic WaterGuard may be the better option.
How do you use a water guard?
Using a water guard is a great way to ensure that any area prone to high levels of moisture remains protected from the elements. To use a water guard, start by selecting which area you need to protect, then measure the perimeter.
Cutting the water guard material to the correct size, lay it over the area that needs protection. Ensure that the water guard is secured at the edges and will not slip from its original position. Once placed, you can add sealant to further protect the area.
This will prevent water from entering the space and cause damage. Additionally, you may choose to use nails or staples to firmly secure the water guard in place. For further protection, you can use a second layer of water guard material over the first, adding additional sealant between the layers.
This will provide extra protection to the area.
How do you spray an Olympic sealer?
Spraying an Olympic sealer is a relatively easy job that takes little time and produces great results. You need to make sure that you have the proper safety gear for the task, including safety glasses, a respirator, and clothes that fully cover your arms and legs.
First, you need to prepare the surface you will be spraying. It needs to be clean and free from dust, dirt, and debris. You can use a vacuum or a damp, lint-free cloth to accomplish this.
Once the surface is prepared, you need to shake the can of Olympic sealer for a full minute before you start to apply it. Before you begin spraying, make sure the can is held at least 10 inches away from the surface and at a consistent distance.
Move the can in a steady pattern with overlapping spray patterns to ensure coverage. Allow the sealer to dry completely before applying a second coat, if necessary.
When finished, clean the area thoroughly with a damp cloth and dispose of the can according to local regulations. You should also rinse out any leftover sealer that may be in the spray nozzle by spraying it into an old rag several times.
This will help ensure a longer life for your spray can.
Does wood need to be dry before sealing?
Yes, wood needs to be dry before it can be sealed. Wood that is too wet or damp can cause issues with the sealant, such as bubbling or peeling. Before applying the sealant, any moisture or other contaminants should be removed from the wood using a product such as a wood cleaner/protection agent or TSP.
This will act as a primer coat and provide an effective barrier between the wood and the sealant. After allowing the wood to dry, it should be sanded using a fine-grit sandpaper. This will help to remove any imperfections in the wood and provide a smooth surface for applying the sealant.
After sanding, the wood should be vacuumed to remove any dust or debris before applying the sealant. Ensure that the sealant you choose is suitable for the type of wood you are sealing. Once applied, allow the sealant to dry completely before using the wood.
What time of year should you seal your deck?
The best time of year to seal your deck is between late spring and early fall when temperatures are regularly between 50 and 85 degrees Fahrenheit. This is the ideal temperature range for sealing your deck since it allows ample time for the sealant to dry and for the protective coating to strengthen.
You should also avoid sealing your deck when there is extreme humidity or during a rainstorm. It’s important to clean your deck and remove any dirt, moss, mold, or rotten wood as these can ruin the deck sealing process.
Additionally, you will want to sand and prepare the surface of the deck before applying a sealant. Once your deck is free of debris and thoroughly clean, you can apply a sealant of your choice. Finally, it’s important to consider any debris or leaves that may accumulate on your deck in the future and how you’re going to deal with it.
As such, it’s recommended to opt for a sealant that will help prevent mildew, mold, and water damage. With regular maintenance and prompt deck sealing, you can ensure your deck will stay in good shape throughout the year.
Is it too late to seal my deck?
No, it is not too late to seal your deck. Sealing your deck is a great way to protect it and extend its life. Depending on the climate you live in, you may need to seal your deck on an annual basis. Sealing your deck right away is the best course of action, as it will keep it looking new and prevent water and other substances from penetrating the wood.
It will also protect the wood from staining, fading, and from weather damage. Furthermore, sealing your deck will reduce the amount of maintenance you need to do each year. If you want to get started, make sure you buy a sealant specifically made for the type of wood that you have.
To apply the sealant, use a brush, roller, or garden pump sprayer and start from the top of your deck and work your way downward. Make sure that you watch out for any pooling or standing water and apply additional coats as needed.
After you have applied the sealant, allow it to dry completely before walking on the deck or placing any furniture back on it.
Is Olympic wood stain any good?
Yes, Olympic wood stain is a good option for staining wood surfaces. It is available in a variety of wood tones and provides a durable, long-lasting finish that resists fading over time. It is easy to apply and cleanup, and can be used both indoors and outdoors.
It is also waterproof, mold and mildew resistant, and can be used on a variety of wood surfaces. Olympic wood stain is also affordable, making it a great option for those who need to save money on their staining project.
Which deck sealer lasts the longest?
Generally speaking, the type of deck sealer that lasts the longest is a penetrating oil-based sealer. This type of sealer is able to penetrate deep into the wood, which helps to protect it from water, sun, and other harsh elements.
Additionally, it has the ability to repell both mildew and mold, which helps to reduce the likelihood of damage over time. To ensure that it lasts for a long time, it is important to properly clean and prepare the wood before applying the sealer and follow the manufacturer’s instructions closely.
It is also recommended to perform an annual maintenance to reapply the sealer and check for any damage or wear and tear. With proper care and maintenance, an oil-based penetrating sealer should last for up to eight years.
Should I use Thompson Water Seal on pressure treated wood?
Using Thompson Water Seal on pressure treated wood is not always the best choice. Pressure treated wood is already treated to be more resistant to moisture, rot, and insect damage, so additional waterproofing may not be necessary.
In some cases, Thompson Water Seal can seal and protect the wood from the elements, but it is also possible to cause more harm than good by using Thompson Water Seal on pressure treated wood. For example, the resin and oils in Thompson Water Seal products can strip some of the pressure-treated chemicals from the wood, making it less water-resistant and more prone to damage.
It may also require more frequent reapplication and maintenance than pressure treated wood on its own. On the other hand, if the pressure treated wood is already losing its protective coating, it may be beneficial to use Thompson Water Seal to extend the life of the wood.
Ultimately, it’s always best to check with a qualified professional before deciding on a course of action.
