The green-to-blue shock system is a process that assists in minimising the risk of spreading disease in aquaculture systems. This system involves utilizing a series of tanks that have connected systems in order to transfer and purify water, while also enabling fish to go through all the stages of development.
The process starts by introducing a new batch of fry or juvenile fish in a container known as the green tank, where they will stay for around 3 weeks. During this stage, the water is kept clean, by filtering, ultraviolet sterilization and water exchange.
There is also no connection to other tanks in the system, in order for the fish to remain free from any diseases or viruses.
Once the desired growth rate and condition of the fish is reached, they will be moved to the first blue tank. This tank is connected to the green tank, thus facilitating the transfer of water, but not the transfer of fish, as it has a mechanical separator.
The fish in the blue tank will remain there until they are of a suitable size and condition. Then they will be able to move on to the biofilter tank, which is connected to the blue tanks. The water from the blue tanks is then allowed to flow into the biofilter, where organic matter and waste are eliminated by beneficial bacteria.
After going through the biofilter, the water is clean enough to go back into the blue tanks, to then start the whole cycle again.
As the process occurs continually, the fish in the blue tanks never need to go back to the green tank. Therefore, providing a safe environment for the fish and preventing them from being infected with any possible diseases from other fish in the system.
This system of transferring, filtering and exchanging recirculated water have been used successfully around the world to produce healthy fish stocks.
How long does it take for green to blue to work?
Green to Blue is an organic fertilizer technology company that specializes in creating an efficient and sustainable agricultural system. The company’s technology uses natural and synthetic chemicals, such as liquid nitrogen, to improve soil fertility and promote healthy crop growth.
The amount of time it takes for Green to Blue technology to work will depend on several factors, including the nature of the soil, the type of crop being grown, and the application of the technology.
Generally, it can take anywhere from weeks to months to see the desired results from Green to Blue technology, although results may vary depending on the specific crop and soil conditions. For example, in some areas, the use of Green to Blue technology to promote healthy crop growth has been reported to take weeks, while in other areas, it may take months to see noticeable results.
Additionally, the application method and frequency of application may influence how quickly the technology works. In short, the amount of time it takes for Green to Blue technology to work ultimately depends on a variety of factors, and results may vary depending on the specific circumstances.
How do you go from green to blue shock in pool?
To go from green to blue shock in a pool, first use a product specifically designed to remove metals like copper and iron that can cause green pool water. Be sure to follow the directions on the product package carefully.
Then add chlorine or non-chlorine shock in the form of granules or sticks to the water. The shock will consume any contaminants and other particles, and will cause the pool to turn blue once again. Lastly, use a chemical test kit to check the chlorine and pH levels.
Adjust the chlorine and pH as needed, to ensure the pool water is balanced.
Can you put too much shock in a pool?
Yes, it is possible to have too much shock in a pool. When too much shock is added, a chlorine odor is often detectable, leading to pool water that may be uncomfortable to swim in. Generally, there should only be a few teaspoons of shock additives for every 10,000 gallons of water in the pool.
Excessive shock can cause cloudy water and have an undesirable effect on your pool’s pH levels due to the increased amount of chlorine. Additionally, excess amounts of shock can cause skin, eye, and nose irritation.
For these reasons, to keep your pool at optimum health and safety levels, it is important to use the appropriate amount of shock regularly while also adding other necessary chemicals (such as stabilizer and pH adjusters) as needed.
Additionally, it is helpful to test the pool’s water often and use shock or other chemicals to maintain the proper balance of pH, alkalinity, and calcium levels. Following these basic pool care steps will make sure your swimming pool is safe and enjoyable for everyone.
Should I brush pool before shocking?
Yes, you should brush pool before shocking. This helps to remove any dirt, debris, and algae that may be clinging to the walls of your pool. It also helps to loosen any debris that has settled on the bottom and is not easily removed.
Once the surface is clean, you can more effectively shock the pool and prevent the growth of bacteria and other contaminants. Proper brushing is essential to keep your pool clean and safe, so it’s important to make sure you do it regularly.
How long should I run my pool pump after shocking?
You should run your pool pump for at least 24 hours after shocking the pool. This will allow the chemicals in the shock to distribute evenly throughout the water and start to sanitize it. Shocking the pool kills all the bacteria and other forms of algae, so it is important to make sure that the shock is fully distributed before using the pool again.
Additionally, you should test the chlorine levels in the pool water before and after running the pump to ensure that all the bacteria has been killed and the water is safe to swim in.
Can I shock my pool twice in one day?
Yes, you can shock your pool twice in one day if necessary. It is always best to follow the instructions on the packaging of your shock product to get the best results with the least amount of effort.
Generally, you want to shock your pool at least once a week. If you have increased usage, or if the pool has been neglected and filled with bacteria, you may need to shock your pool more frequently than once a week.
In that case, you can shock your pool twice in one day. However, if the pool isn’t noticeably dirty, it is likely that shocking it twice in one day is unnecessary and could potentially do more harm than good.
Shock products are chlorine-based, and when added in excessive amounts, they can be damaging to the pool and make it difficult to maintain. Always read the instructions on the product packaging and err on the side of caution when shocking your pool.
How can I make my green pool clear faster?
There are several steps you can take to help make your green pool clear faster.
Firstly, you need to use a chlorine shock to raise the chlorine levels in your pool. Chlorine shock is a disinfectant that helps kill off any bacteria, algae, and other organisms that may be lingering in the water and causing it to turn green.
This can be done manually or via an automated chemical feeder.
Secondly, you need to clean up any leaves, twigs, and other debris that may be floating in the pool. They can cloud up the water or block the filtration system from working properly.
Thirdly, you should backwash the pool filter to remove any dirt or contaminants that may be blocking the system from filtering out the green algae from the water.
Fourthly, you should add an algaecide to the pool to help prevent any future outbreaks of algae or bacteria. This can also be done manually or via an automated system.
Lastly, if needed you should consider adding a clarifier to help boost the clarity of the water. Clarifiers are a chemical solution that attach to the particles in the water, causing them to clump together and sink to the bottom of the pool, leaving clear water behind.
By taking these steps, you should be able to make your green pool clear faster. However, it’s important to make sure that the chlorine levels are not too high, as this can be harmful to swimmers and damage the liner of the pool.
Additionally, make sure to regularly maintain your pool to prevent future issues.
How do I get my pool from green to clear?
To get your pool from green to clear again, you’ll need to use a multi-step process.
Step 1: Testing the Pool Water – Start by testing the pH, alkalinity and calcium hardness levels in the pool water, as well as for other contaminants like oil or debris. You may want to use a pool water test kit to do this.
Step 2: Balancing the Pool Water – After testing your pool water, use a pool water balancer to adjust the pH and alkalinity levels to the correct levels for your pool. You may also need to shock the pool with a granular chlorine or other type of shock, depending on the results of your water testing.
Step 3: Cleaning the Pool – Clean out the pool filter and any other debris that has collected in the pool. Vacuum the pool floor and sides with a pool vacuum and scrub out any dirt, scum or algae that has accumulated.
Step 4: Adding Pool Chemicals – Add the necessary pool chemicals to treat and sanitize the pool water, such as algaecides and calcium hardness increasers, as well as stabilizers to prevent sunburn and chlorine to kill the spores of algae.
Step 5: Preventing Future Issues – Make sure to keep up with regular maintenance for your pool by testing the pH and alkalinity levels twice a week and adding the necessary chemicals to keep the water balanced and safe.
You should also cover the pool when not in use to prevent debris from entering the pool.
By taking these steps, you should be able to get your pool from green to clear again, and help prevent any future issues.
How long do you have to wait to swim after using Green to clean?
Generally you should wait at least 30-60 minutes before swimming after using Green to clean. It is important to allow the product to dry before swimming or other activities that involve contact with water.
As with all products, it is recommended that you read the label and follow the manufacturer’s instructions for proper use and safety. You may also want to wait a few hours before jumping back into the water so there is ample time for the product to do its job and properly disinfect your pool.
Will Shock clear a green pool?
Yes, Shock can be used to clear a green pool. Shock is a granular chlorine specifically designed to quickly raise chlorine levels and kills bacteria, algae, and other contaminants that cause water to look cloudy or acquire a green tinge.
In order to successfully use shock to clear a green pool, you’ll have to check and adjust both pH and TOTAL chlorine levels, as well as use an algaecide if needed. It is recommended that you shock the pool water for 10 hours and then test for chlorine the next day.
If the chlorine levels and the pH are both in the proper range, then the pool can be reunited for fun and leisure. When shocking a pool, it is important to remember to keep an eye on the pH and TOTAL chlorine levels and to allow it to cycle every 8-12 hours.
Test your pool’s water throughout the cleaning and shock process in order to make sure you don’t add too much chlorine and that the chlorine concentration is adequate.
What to do if pool is still green after shocking?
If your pool is still green after shocking it, there are a few things you should check and do to get rid of it.
First, check the pH level of the pool. If the pH is too low, the chlorine won’t be as effective and can cause the water to remain green. You should adjust the pH level to ensure it is between 7.2 and 7.6.
Next, check the chlorine level to ensure it is at least 1 ppm. If the chlorine level is too low, shock the pool again with double the amount of chlorine. Alternatively, use a pool clarifier to help bind together small particles, allowing the filter to capture them more easily and clear the pool.
You should also check the pool filter and ensure it is working properly and the cartridge or DE grids are not clogged. If they are clogged, clean and backwash the filter, or replace the cartridge or grids as necessary.
Finally, check the flow rate of the pool pump. If the flow rate is too low, it could be preventing the filter from working efficiently, allowing the green particles in the water to remain. To remedy the low flow rate, you should backwash the filter, clear any blockages in the filtration system, and adjust the multiport valve to optimize the flow rate.
It may take a few days, but by taking these steps, your pool should be back to its beautiful, clear color in no time.
How much shock do I need for a green pool?
It depends on the level of contamination in your pool. To determine how much shock you need for a green pool, you should first test your pool’s free chlorine levels and pH. If the free chlorine is 0 and the pH is above 7.
5, it is likely that algae growth is the cause of the green color in your pool. In this case, you should add enough non-chlorine shock, also known as “super shock,” or alkalinity increaser, to reach between 10 and 20 parts-per-million (ppm).
If you are looking to shock your pool without adding chlorine, you can use a combination of liquid and granular non-chlorine shock products. If the free chlorine is higher than 0 and the pH is below 7.
5, it is likely that chloramines, not algae, are causing the green color. In this case, you should shock your pool with enough chlorine to reach between 10 and 20 ppm. If you are looking to shock your pool with chlorine, you can use a combination of liquid and granular chlorine shock products.
It is important to note that the exact amount of shock that you need for your green pool may vary based on the size of the pool, the current pool chemistry, and the type of shock product you are using.
When in doubt, it is always safest to follow the instructions on your shock product of choice for best results.
Why won’t my green pool clear up?
There can be many reasons why your green pool won’t clear up. The main factor that can cause this is an excess of algae in the pool, which can be caused by not enough chlorine, too much sunlight, or other sources of bacteria or organic matter such as leaves or dirt.
To fix this problem, you need to shock treat the pool, meaning you need to raise the chlorine levels up to 5-10 times the standard levels to kill off the algae. Additionally, it is important to make sure to run your filter for at least 8-12 hours a day, as well as backwashing the filter as needed, in order to increase the circulation of the water and clear the debris.
It is also important to remember to brush and vacuum the pool in order to dislodge any algae or debris that may be stuck on the walls of your pool. If these steps do not work, it may need to have an algaecide added to it in order to help reduce the algae population and make the pool easier to maintain.
Is green to blue a flocculant?
No, green to blue is not a flocculant. Flocculants are substances that are added to a solution to cause the individual particles suspended in the solution to aggregate, or form clumps. These particles can include inorganic materials such as metal ions as well as organic materials such as bacteria.
Common flocculants are aluminium sulfate, ferric chloride, or ferric sulfate. Green to blue, on the other hand, is a term used to describe the color shift of water with increasing levels of Total Organic Carbon (TOC).
Increasing TOC in water causes the water to shift in color from blue to green, turquoise, yellow, or even shades of brown.
What does green to blue do for pools?
Green to Blue is an eco-friendly pool maintenance system that helps pool owners maintain their pools in an environmentally-friendly way. It combines technology, chemistry, and green chemistry to eliminate the need for hazardous, traditional pool chemicals.
Instead of using conventional chemicals, Green to Blue helps to preserve pools by using encapsulated enzymes and ozone, significantly reducing the amount of chlorine needed. The system works by utilizing enzymes and bacteria that target and break down organic contaminants, such as body oils and sweat, allowing the chlorine to work efficiently to kill bacteria and other contaminants.
The ozone helps eliminate odors, while also providing disinfection. Green to Blue is a great solution for pool owners who want to reduce their use of synthetic pool chemicals while still keeping their pool clean, safe and healthy.
How long after green to blue Can you swim?
It all depends on the water conditions and temperature. Generally, if the water is clean enough, warm enough, and not too deep, it is safe to swim after the water has changed from green to blue. In most cases, you should wait until the water looks completely clear, with no traces of green when viewed from the surface.
You can also check the clarity of the water by looking at the light filtering through from the bottom of the pool. It should be clear and not cloudy. Once the water has turned a bright blue, and the visibility is clear, you can usually swim safely.
Can you swim with flocculant in the pool?
Yes, swimming with flocculant in the pool is possible, however it is not recommended. Flocculants are chemicals added to swimming pools to bind together dirt, oil, and other unwanted particles that may be suspended in the water.
This allows for easier filtration and cleaner pool water. However, swimming in water that contains flocculant can be irritating to some people’s eyes, skin, and/or throats, so it is not advised. Additionally, flocculant is meant to be added to a pool before it is cleaned and subsequently filtered out.
As such, it is not intended to be left in the pool with people swimming in it. For these reasons, it is generally recommended to not swim with flocculant in the pool.
