When installing a shelf above the toilet, the ideal placement for the first shelf is about 12 inches (30 cm) above the top of the toilet tank. This will provide adequate space for storage and clearance for larger items, such as towels and toiletries.
If installing multiple shelves, measure the space between the shelves to ensure they are spaced appropriately. Generally, the first shelf should be 12 inches (30 cm) above the toilet tank, with the other shelves spaced 12 to 16 inches (30 to 40 cm) apart.
Depending on the height of your ceiling, you may need to adjust the shelf sizes and spacing accordingly. Additionally, consider how much storage you need, as well as the various items you’ll be storing, when deciding the height and placement for your shelves.
Where should floating shelves be in bathroom?
Floating shelves can be a great addition to any bathroom, as they take up very little space and can hold a variety of items. However, it is important to think carefully about where they should be installed.
Generally, it is best to avoid installing floating shelves near wet areas, such as a bathtub or shower. As such, the ideal location for a floating shelf should be somewhere away from these areas, such as above the sink, near the door, or in the corner near the toilet.
Another consideration is weight. Make sure the floating shelves can support the weight of items that will be placed on them; otherwise, the shelf may not be able to hold up to its purpose. Also, it is important to ensure that the shelf is securely attached to the wall, so it does not come down unexpectedly.
Floating shelves are an attractive way to make use of wall space in the bathroom and can hold items such as towels, soaps, and other toiletries. With proper installation, they can make a great addition without taking up much space.
How much space do you need between floating shelves in a bathroom?
When installing floating shelves in a bathroom, it is important to make sure that you provide adequate space between them. Typically, a gap of at least 3 inches is recommended between the shelves and the wall or other furnishings in the room.
While the exact measurements can vary depending on the size of the shelves and the items that will be placed on them, generally speaking, you should leave a gap of at least 3 inches for easier access and to avoid any potential damage due to overcrowding.
Additionally, be sure to account for the location of the plumbing or other objects when making your measurements, as this could cause an obstruction if placed too close to a shelf.
Can you put shelves above a toilet?
Yes, you can put shelves above a toilet as long as the conditions in the room are right. The type of shelf you choose should be secured to the wall, and the weight and materials of the shelf and items placed on it should be considered.
If you plan to put a wooden shelf above a toilet, make sure the wall is capable of handling the additional weight. Additionally, think of the functional aspects, such as making sure the bottom shelf is installed far enough up so that it doesn’t interfere with the size and shape of the toilet tank.
And also it’s best to avoid low-hanging corners and edges because they can feel awkward and uncomfortable when using the toilet. Finally, if the room gets humid or musty, you may want to opt for a more moisture-resistant material for the shelves.
What should go above a toilet?
Above a toilet should typically be a wall-mounted vanity mirror or cabinet. Other items that can go above the toilet include border trim, a decorative clock, sconces, floating shelves, and wall art. When selecting items to design around your toilet, it is important to ensure that whatever you choose provides adequate space for easy access.
Be mindful of the height of the item and its placement to avoid any awkwardness when using the toilet. Additionally, make sure to measure space if you plan to install shelves to ensure they fit properly.
What do you put on bathroom shelf above toilet?
The type of items you choose to put on the shelf above the toilet will depend on the size of your bathroom and your personal preferences. If the shelf is large enough, you may want to add decor items such as candles, air plants, or artwork.
Photos of family and friends can also add a personal touch. A set of rolled up hand towels can add an elegant touch and provide an easy way to have an extra towel handy. Toiletries such as extra rolls of toilet paper, travel sized items, and a small basket of items to use when cleaning the bathroom can add convenience.
Small plants like succulents or ivy or even a vase of fresh flowers can provide a natural decorative touch. Consider adding a set of decorative soap dishes to store extra soaps or a jar for cotton balls.
An LED mirror with a built-in battery can provide a quick touch up of your makeup or hair and extra lighting for applying makeup.
How high should a cabinet be above a toilet?
When deciding on the correct height for a cabinet to be installed above a toilet, it is important to consider the maximum height of the user. If an adult is the primary user of the toilet, then the cabinet should be no higher than the top of the bowl.
This will ensure that the cabinet is easily accessible and that the user won’t have to bend over or stretch to reach items in the cabinet. If a child or a person with a disability is using the toilet, the cabinet may need to be a few inches lower than the top of the bowl in order to accommodate the individual’s height.
Depending on the type of cabinet, it may be helpful to leave a few inches of space between the top of the toilet and the bottom of the cabinet in order to prevent any items stored in the cabinet from potentially blocking flushing or impacting the toilet’s tightness.
How do you install a toilet shelf?
Installing a toilet shelf is relatively straightforward. You will need: a toilet shelf, drilling equipment, screws, and a stud finder.
Begin by using a stud finder to locate where the studs are in the wall behind the toilet. This will help you determine where to drill holes.
Using the drilling equipment, make two holes on the wall in line with the studs. Put the screws through the holes in the toilet shelf and then into the holes in the wall. Make sure you tighten the screws with the screwdriver until the shelf is secure.
Now that the shelf is securely in place, you can load it up with accessories or decorative items.
Be sure to place the toilet shelf in an area of the wall that is not too close to the toilet. Otherwise, it could get wet due to condensation or other water-related issues.
If you have any questions or concerns about the installation process, it’s always a good idea to consult a qualified plumbing professional.
How high above a toilet should you hang a picture?
When hanging a picture above a toilet, the general recommendation is to hang the picture approximately 6 to 8 inches above the toilet tank. This will provide an appropriate amount of breathing room above the toilet, while also ensuring that the bottom of the picture frame is no lower than 4 inches above the seat.
Additionally, it’s best to measure the height of the toilet seat, as this can vary from toilet to toilet. Finally, either avoid hanging a picture directly centered above a toilet’s water tank, or adjust the height slightly to avoid this positioning.
By following these guidelines you should be able to hang your picture in an aesthetically pleasing position above your toilet.
How far above toilet are floating shelves?
Floating shelves installed above a toilet typically need to be installed at least 12 inches above the highest point of the toilet tank in order to avoid any possible splashing. Allowing for at least 12 inches between the highest point of the toilet and the bottom of the shelves will also provide enough space for the toilet seat to be fully lifted up and the lid removed for cleaning.
Depending on the height of the space and the size of the shelves, the floating shelves may be installed higher than 12 inches. When in doubt, it is always best to consult with a qualified carpenter or contractor to ensure the shelves are safely and securely installed.
How do I build my own bathroom shelves?
Building your own bathroom shelves is a great way to save money and customize your bathroom space. Here are some steps to build your own bathroom shelves:
1. Decide on a design for your shelves: First, determine the size and layout of the shelves you want to build. Consider the dimensions of your bathroom and the size and shape of the items you want to store.
2. Choose your materials: Consider the type of wood and other materials you’ll need to build your shelves. If you’d like to save money, look for reclaimed wood or inexpensive wood boards.
3. Measure and cut wood: Measure the wood to the dimensions you need, then use a saw or jig to cut it to size. Make sure you measure twice and cut once to avoid errors.
4. Assemble the shelves: Attach the shelves pieces using wood glue and screws or nails. For extra strength, reinforce the shelves with brackets or L-brackets.
5. Sand, stain, and seal: Sand any rough edges, apply stain or paint in whatever color you desire, and seal the shelves with a protective sealer.
6. Hang the shelves: Use wall anchors and screws to attach the shelves to the wall. For extra stability, use corner reinforcements at the ends of the shelves.
7. Enjoy your shelves: After your shelves are installed, you are ready to add decorations or storage containers. Enjoy your new bathroom shelves!
How far apart should bathroom shelves be?
Bathroom shelves should be spaced apart based on the size and weight of the items that need to be stored. If you’re storing lightweight items, such as towels, washcloths, and smaller bottles of toiletries, it is safe to have shelves spaced 6-8 inches apart.
For heavier items, such as shampoos, conditioners, and other bulky items, shelves should be spaced 12-16 inches apart.
Additionally, it’s important to consider the size of the items that need to be stored and the depth of the shelves to determine how far apart they should be placed. If the shelves are deeper or the items are bulkier, you may need to place them a bit further apart, allowing for adequate room to store and access items.
When installing shelves, please be sure to use appropriate hardware based on the weight of the items you are storing.
What height should shelves be?
The ideal height for shelves depends on their purpose and the items that will be stored on them. For general-use shelves, a good guideline is to have the top of the shelf at eye level, which is generally around 54 to 58 inches from the floor.
For shelves used to store books, the standard is lower, around 40 to 48 inches, so they are easier to access. If items such as large objects or décor are being stored on the shelf, then the height should be around 72 inches to make it easier to maneuver them onto the shelf.
When considering shelves for the kitchen, the height and depth should be based on the size and shape of the items you will be storing. For canned goods, 6 to 8 inches deep and 36 to 44 inches high is the ideal size.
For items like plates, bowls, and mugs, the shelves should be installed between 15 and 20 inches from the countertops. In any space, providing adjustable shelving ensures that you can easily customize the shelf for any items you may need to store.