Skip to Content

How far apart should posts be for a 11 split rail fence?

When installing a 11 split rail fence, the posts should be spaced roughly 8-10 feet apart. It’s important to note that exact post spacing is determined by several factors, including the size and weight of the rails, the materials used and the terrain.

In addition, the exact post spacing may vary slightly depending on your particular installation and the type of fence that you are building. For example, if building a two-rail fence, then the seven-foot spacing is generally acceptable, however, if building a three-rail fence, then a ten-foot spacing would be more appropriate.

When selecting post spacing for your fence, be sure to take into account the material you are using, the terrain, and any other conditions that may affect the fence structure. If you have any questions or concerns about the exact spacing for your 11 split rail fence, be sure to contact a professional installer for assistance.

Should split rail fence posts be set in concrete?

It is typically recommended that split rail fence posts be set in concrete, as this helps to provide support to the posts and keep them in place for a longer period of time. Setting fence posts in concrete reinforces their strength, allowing them to withstand weather or other external forces, and maintain their stability over time.

Additionally, those attempting to dig under or through a fence can find it increasingly difficult if the posts are set in concrete. The additional security concrete provides thus helps to keep the fence and yard safe for a longer period of time.

When setting the posts into concrete, use 4-6 inch diameter concrete-filled holes and tamp the post into place. To ensure posts are placed securely, the general recommendation is to set each post 2-3 feet deep into the concrete.

Place the concrete around the post and fill the concrete completely, and make sure it’s compacted well. Properly compacted concrete helps to keep fence posts in place and adds extra support to the fence.

How long are split rail sections?

Split rail sections vary in length based on the type of split rail fence being installed as well as the purpose or desired aesthetic. While most split rail fences use 8-ft rails, some may require 10-ft rails.

Posts typically measure 3 to 4 ft in length, and corner posts require 10-ft rails. These measurements vary slightly based on the specific product being used and the desired look of the fence. As such, it’s best to consult a professional fence installer to determine the exact length of split rail sections that best meet your needs.

How tall should a 2 rail fence be?

The height of a 2 rail fence depends on the purpose for which it is being installed. Generally, a 2 rail fence will be around 4 feet tall, which is an ideal height for containing livestock and other domesticated animals.

However, for added security and protection, some people opt for a 5 or 6 foot high fence. This height makes it more difficult for outside animals to jump or climb over the fence and allows visibility across the barrier.

In landscaping applications or for aesthetic purposes, a 2 rail fence can be anywhere from 3 to 4 feet tall. No matter the height, safety concerns should be kept in mind when installing any rail fence.

Will split rail fence keep deer out?

No, split rail fence will not keep deer out. Although the fence may provide a physical barrier to some extent, deer can usually jump over it or find a way around it. In addition to the ability to jump, deer also have a keen sense of smell and may be able to detect food on the other side of the fence.

Ultimately, the most effective way to keep deer away is to install a higher, more secure fence with additional deterrents such as motion sensors, lights, and odor deterrents. Non-lethal predator deterrents, such as the use of predator decoys, can also be effective.

Additionally, homeowners can discourage deer from entering the property by avoiding planting gardens with plants that attract deer or using other methods such as repellents to discourage deer from entering the property.

How do you build a split rail fence?

Building a split rail fence requires several steps. First, you will need to take measurements and plan the layout of the fence. You will need to consider how many posts the fence will need, the size of the rails, and the overall length of the fence.

Once these measurements have been taken, you can purchase or find the necessary materials such as posts, rails, and wire. Next, you need to mark the post locations, ensuring that the posts are spaced evenly apart.

You then need to dig the post holes and set the posts into the ground.

Once the posts are secured, the next step is to attach rails between them. You will need to make sure that the rails fit tightly into the mortises on each post. Finally, the fence can be wired together securely with barbed wire, to keep it stable and secure.

The last step is to apply a coat of protective sealant to the fence, to prevent it from rotting or corroding over time. With all of these steps completed accurately, you can enjoy your new split rail fence for many years to come.

What type of wood is for split rail fence?

Split rail fences are composed of posts and rails constructed from any number of different types of wood, including cedar, spruce, pine, cypress, juniper, birch, and oak. Cedar is the most popular type of wood used for split rail fencing because of its natural resistance to rot, decay, and insect damage.

The wood has a natural oils that helps protect the wood against the elements, and the grain of the wood allows for the wood to be split into rails easily. Depending on where the fence will be located, some other types of wood may be utilized as they can work just as well as cedar and are often more affordable.

In areas where rot and decay are a major concern, pressure-treated wood can be used, with the treatment helping to protect the wood from the elements and make it last a lot longer. No matter what type of wood you choose, a split rail fence can last many years and provide a great addition to any landscape.

How much does a split rail fence cost per foot?

The cost of a split rail fence per foot varies greatly depending on a number of factors, such as the type of material used, the location of the project, the number of rails and posts, and labor costs.

Generally, split rail fencing will cost between $6 – $9 per linear foot, including both materials and installation. Composite split rail fencing can go up to $22 per linear foot. Pressure-treated cedar rails usually cost between $8 and $10 per foot.

The cost of the installation depends largely on the size of the project. If the fence is larger, it will require more posts and labor, both of which will drive up the cost. Ultimately, the cost of installing a split rail fence can range anywhere from $500 to $15,000 or more, depending on the scope and complexity of the project.

What is the split rail fence wood?

Split rail fence wood is a type of fencing material traditionally made from split logs or posts. This type of fencing is usually used to create a rustic, country look, and is commonly found in rural areas and wooded areas.

It is fairly easy to construct and install, so it is a popular choice for many homeowners. The most common use for split rail fence wood is for a boundary or divide between two pastures, two yards, or two properties.

It can also be used to designate a garden area, to restrict access to a certain area, or simply to enhance the look of a property. The wood used to create split rail fences can include oak, pine, cedar, and locust; it is often treated with an outdoor sealant to protect it from weather and rot.

Split rail fence wood is one of the most economical and attractive fencing options available.

How is post and rail fence calculated?

Calculating a post and rail fence is fairly simple. First, you will need to measure the area you wish to fence in. Determine how many strands of fence you will need, with three or four strands being the most common for livestock.

Make sure to factor in the height of the fence, which can range from three to five feet tall.

Next, you will need to know the length of each strand in feet. Take your width measurement, and divide it by the number of strands. This will give you the length for each strand. Measure and mark off the locations for the posts.

It’s important to leave enough space between each post for the rails.

To figure out how many posts and rails you need altogether, you subtract two from the total number of strands, and then multiply the result by the length of the strand in feet. The resulting number will be the total number of posts and rails required.

For example, if there are 4 strands that are 25 feet each, it would equal 96 posts and rails (4-2=2, x 25=50).

Once you have all of the supplies, you can begin installing your post and rail fence. Dig your post holes and install your posts at the marked locations. Then, secure the rails between the posts using brackets or nails.

Make sure to check periodically to make sure the fence is secure and undamaged.

How high should fence rails be?

The height of fence rails depends on the intended purpose and location of the fence. In general, most residential fences will range from 3 to 6 feet tall, with 4 feet being the most common height for a backyard perimeter fence.

If the fence is being used for privacy purposes, then taller options will be preferable. Regulations regarding fence heights may also vary by region and even by town. Therefore, it is important to check local regulations to ensure your fence complies with relevant rules and standards.

For example, many areas may require that all fences falling within a certain height must also be equipped with a latch to keep them secure. Other types of fences, such as those found on farms, may be much taller as they need to keep animals in and/or trespassers out.

These fences can range anywhere from 4 to 8 feet tall.

Are split rail fences good for dogs?

Split rail fences can be a great option for containing dogs. They are typically lower than traditional fences which makes them easier to jump over, but they can often be a hassle to install and maintain.

It also depends on the size and breeds of your dog. If they are larger breeds or prone to jumping, a higher traditional fence may be the best choice. Split rail fencing is also much easier to see through than traditional fencing, which can provide adequate visibility so you can keep an eye on your dog.

Additionally, the spaces in between the rails make the fence easier to climb over if a curious dog is trying to escape. So, it is important to also have other precautions in place such as burying wire under the fence and using an appropriate collar for your pet.

Overall, split rail fences can be a good option for dogs, as long as you are aware of the additional precautions you will need to take.

Does a split rail fence need to be sealed?

Whether or not a split rail fence needs to be sealed depends on the construction materials used to build the fence. If the fence is made from pressure-treated wood, it typically does not need to be sealed as the treatment provides protection against rot and decay.

However, if the fence is made from untreated wood, sealing the wood with a waterproofing sealant is necessary to weatherproof the fence, protect it against rot, and ensure longevity. Sealing may also be required if the fence will be exposed to harsh weather elements that can damage the wood.

Additionally, if the wood has been painted, staining, or varnished, it is important to periodically reapply the coating to maintain a weather-resistant barrier and keep the wood in good condition.

Is 2 feet deep enough for fence posts?

It depends on the type of fence you are installing, as well as the climate and soil conditions in your area. Generally speaking, fence posts should be buried at least 2 feet deep in order to ensure stability, especially if you are using pressure-treated wood.

However, posts made from metal or cement may require a deeper hole; for example, metal posts should be buried at least 3 feet deep. In regions with high winds or where soil conditions are susceptible to frost heaving, you may need to dig even deeper.

Additionally, if you live in an area prone to flooding, a deeper post hole may be necessary to keep your fence from floating away. Most importantly, be sure to check local building codes to determine how deep you must bury the posts in your particular area.