The length at which a tablecloth should hang is largely dependent on the size and shape of the table. However, as a general guideline, the tablecloth should hang six to eight inches down the sides and eight to 12 inches down the ends of the table.
For a round table, it is best to start at the center of the table dropping eight to 12 inches on each side. It is important that the tablecloth hang evenly on all sides of the table to create a nice, finished look.
Be sure to measure the length of the sides and ends of the table to ensure the tablecloth fits properly.
How do you measure a tablecloth for drop?
Measuring your tablecloth for a drop involves knowing the exact size of your table, as well as the amount of drop you desire. For the best draping effect, the drop should completely cover the sides and legs of the table, with either just a small border of the tablecloth on the floor, or using a weighted hem that touches the floor.
First, you need to measure the table’s length, width and height. You will measure the length and width at the top of the table, while the height should be measured at the middle or lowest point of the far side.
When measuring, account for any obstacles such as table legs.
Once these measurements have been noted, you can decide how far down the tablecloth should drape. The rule of thumb is around 8 – 10 inches. Once the desired drop has been determined, you can use the following formula to determine the size of the tablecloth required:
Table Length + Table Width + Drop x 2 = Tablecloth Length
Table Length + Table Width + Drop x 2 = Tablecloth Width
For example, if you have a dining table that measures 47”x81” and you want a drop of 10”, the tablecloth should measure 97”x97”.
Once you have the measurements for the tablecloth, use them to determine the type of material you need for the job. A lightweight fabric such as cotton may be suitable for a lighter drop, whereas a heavier material like satin may be better suited for deeper draping.
How much bigger should my tablecloth be than my table?
When it comes to tablecloths, the general rule is to add 8-12 inches (or 20-30 cm) on each side of the table. This means that a square table should get a tablecloth that is up to 24 inches (or 60 cm) larger than the table, and a rectangular table should get up to 36 inches (or 90 cm) larger.
Remember, the bigger the tablecloth, the more space you will have to comfortably maneuver silverware, dishes, and other items on the table surface. Additionally, larger tablecloths will create more exaggerated folds and draping, and also help to maintain an even table height by covering unsightly table legs.
What are the standard tablecloth sizes?
The standard tablecloth sizes depend on the size and shape of the table. For a rectangular table, the sizes available are 54” x 72”, 54″ x 90”, 54″ x 108”, and 54″ x 120”. For the square table, the standard sizes available are 54” x 54”, 70″ x 70”, and 90″ x 90”.
For round tables, the standard sizes available are 60” diameter, 72” diameter and 90” diameter. Additionally, there are some extra-long tablecloths that measure up to 17 feet in length. The width of the tablecloth ranges from 8” to 120” for all the different table shapes.
It is important to remember that tablecloths should cover the edges of the table so that all four corners of the table are hidden beneath the cloth.
What size is a 6 seater tablecloth?
The size of a 6-seater tablecloth depends on the type of table and its measurements. Generally, a 6-seater tablecloth should measure from 72 – 100 inches in length, and from 42 – 60 inches in width, in order to accommodate all six chairs comfortably.
If you’re buying a new 6-seater tablecloth, make sure to take measurements of your own table in order to select the right size. Make sure to add a few extra inches in length and width to ensure the tablecloth hangs nicely, drapes over the corners, and fits securely over the entire table.
How do I measure my table for a tablecloth?
To accurately measure your table for a tablecloth, start by measuring the length and width of the top of the table. Height isn’t usually something you’ll need to think about when selecting a tablecloth.
To make sure your tablecloth will fit properly and hang to the floor, measure the length of the table and add the drop length of your desired tablecloth to it. Do the same with the width and subtract 4 inches.
This will give you the size of the tablecloth that you’ll need to buy. Before you buy your tablecloth, make sure that you double check the measurements to avoid purchasing the wrong size.
What size tablecloth for a rectangle table that seats 6?
For a rectangle table that seats 6 people comfortably, you will need to purchase a tablecloth that is approximately 8-10 feet long and about 5-6 feet wide. With this size tablecloth, you will have enough material to cover the table top and allow for some extra fabric to drape on the sides.
For more formal events, you may need to create an even larger tablecloth, around 10-12 feet long and 6-7 feet wide, for a more finished look.
What sizes do oblong tablecloths come in?
Oblong tablecloths come in a range of sizes, typically measured in inches, to fit rectangular tables of all sizes. Standard oblong tables measure anywhere from 35 inches wide by 60 inches long to 96 inches long.
However, some tablecloths come in smaller and larger sizes to fit any table. If you’re looking for oblong tablecloths, you can choose a size that matches your table as closely as possible, or if your table size falls in between two sizes, you can choose a size closest to the larger one.
It’s important to note that most oblong tablecloths come in standard sizes, including 30 by 60 inches, 42 by 144 inches, 45 by 90 inches, 48 by 96 inches, 54 by 90 inches and 60 by 120 inches.
What size table does a 108 tablecloth fit?
A 108 tablecloth will fit an approximately 8-foot-long rectangular table. Depending on how much overhang you prefer, this tablecloth will cover a rectangular table that is between 72 and 96 inches long and between 30 and 48 inches wide.
To ensure a proper fit, measure your table before purchasing a 108 tablecloth. Be sure to add a few extra inches to each side to accommodate any table width or length variations and to ensure that the tablecloth has enough overhang.
