Skip to Content

How far should a range hood stick out?

The amount that a range hood should stick out will depend on the size of the hood, the size of the cooking surface in the kitchen, and the height of the ceiling. Generally speaking, a range hood should extend at least three inches beyond the surface of the cooking surface or range top and should be high enough to clear most of the smoke, steam, and odors in the kitchen.

It is recommended that a range hood should be installed at least 30 inches above the cooktop in order to effectively remove smoke and odors. If you have a cooking surface that is larger than 30 inches, it is recommended that the range hood extend even further from the surface.

Some range hood designs can extend as far as 36 inches which is ideal for larger cooking surfaces. In some cases, the range hood will also need to be higher to allow for more efficient ventilation. If you have a low ceiling, you may need to opt for a shallow range hood or fan that will still provide adequate ventilation without extending too far from the cooking surface.

How close should cabinets be to range hood?

When installing cabinets near a range hood, you should leave a minimum of 6 inches between the cabinets and the hood to ensure adequate air flow. This gap should allow air to escape and create an air current that will draw dirt, smoke, and grease out of the kitchen area.

Keeping your cabinets as far away from the range hood as possible is also important for preventing the risk of fire. However, how far away you should place your cabinets from the hood will depend on the size, hood type, and your particular kitchen setup.

In addition, you should always make sure that the distance between your cabinets and hood is consistent across the entire installation. This will enable the hood to do its job correctly and keep your kitchen free of smoke and grease.

How wide should a hood be for a 36 range?

The width of the hood for a 36 range should be chosen based on the size and shape of the range. Most 36-inch ranges are 30 inches wide, so the hood should be chosen to fit the width of the range. Generally, a hood should measure at least 3 to 6 inches larger than the width of the range in order to provide adequate space for air flow.

So, for a 36-inch range, the ideal width of the hood would be between 33 and 36 inches. Additionally, the type of hood you choose should be based on the style of your kitchen and should not exceed the width of the range.

Can you put a 36 inch range hood over a 30 inch stove?

Yes, you can put a 36 inch range hood over a 30 inch stove. A 36 inch range hood is the standard size, and it should overlap the stove by a few inches on each side. This extra length is necessary to effectively draw smoke away from the cooktop.

An adjustable chimney kit may be required to help you fit the range hood to your stove. The kit allows you to adjust the height of the hood, usually up to 8 inches, to accommodate various cooktop heights.

When installing a range hood, you may also need to adjust the motor, filters, and fan speed to ensure it operates effectively and efficiently.

Should my range hood be wider than my range?

The answer to this question will depend on your particular kitchen layout and the type of range hood that you have chosen. Generally speaking, it is best to have a range hood that is slightly wider than the range itself.

This is to ensure that the hood is able to adequately capture steam, grease, and smoke emanating from the range. If your range hood is too narrow, it will not be able to capture the required airborne particles properly and this can lead to lingering odors and potential safety issues.

Additionally, if your hood is much wider than your range, it may not look aesthetically pleasing. However, it is important to consider the size of your kitchen and the particular range hood model that you have chosen.

If they are compatible, then it is generally beneficial to have a range hood wider than your range.

How big of a vent hood do I need?

When it comes to determining the size of vent hood you need, the answer depends on several factors. One of the most important is the size of your cooktop or range. For example, a 600 CFM vent hood is recommended for a 30-inch cooktop.

If you have a larger cooktop, you’ll need something stronger. You also need to take into consideration the type of cooking you do, as this can have an effect on the size of the hood. High-heat cooking styles like grilling or sautéing typically require a larger CFM, while simmering and boiling would require a lower CFM.

You may also need to consider additional factors such as the ceiling height or any existing cabinetry before you can determine the proper size for your situation. Ultimately, the best way to figure out the right size vent hood for your home is to consult a professional.

What size should my hood be?

The size of your hood should be based on the type & size of the range/cooktop you’re using, as well as the size of your kitchen. Generally, a hood should be at least as wide as the range/cooktop, so that it covers the entire cooking surface.

For example, if you have a 30-inch range/cooktop, you should have at least a 30-inch hood. The larger the range/cooktop, the larger the hood should be. The hood should also extend about three inches (or more, depending on the height of the ceiling) beyond the range/cooktop in order to create a ventilation chamber that allows the air to move more effectively.

If your ceiling is higher, you should consider a taller hood with more powerful CFMs (cubic feet per minute) that can move air more efficiently. Additionally, the size of the hood should be in proportion to the space of the kitchen.

A small, cramped kitchen would not need a large hood as it may look out of place and be too much for the space. Likewise, a large kitchen may need a larger, more powerful hood to effectively remove steam, smoke, and odors.

How wide is a range hood?

The width of a range hood depends on the size and design of the hood. Standard and basic range hoods typically measure between 30 to 36 inches wide and will fit most standard cooktops and stoves. Range hoods can also be created to be a custom size to fit a particular cooktop, which can range from 24 to 48 inches wide or more.

When sizing a range hood, a general rule of thumb is to select a hood that is equal to or slightly wider than the cooktop. It is also important to consider the height, length, and style of the range hood to find one that fits your needs and is aesthetically pleasing in the space.

What size hood do I need for a 30 inch range?

When choosing a hood size for a 30 inch range, you want to make sure that the hood is bigger than the range it is protecting. Ideally, you should choose a hood that is at least 2 – 5 inches larger than the range.

For example, if you have a 30 inch range, you should pick a 34 to 35 inch hood. When selecting a hood to go with your range, it is important to consider the BTU of your range, the cubic feet per minute of the hood, and the size of the hood.

You want to make sure that the hood is powerful enough to move the air through it efficiently and capture grease and smoke. You should also make sure that the hood is an appropriate size to fit over the range and any surrounding cabinets or walls.