Wet and Forget is a unique cleanser that requires just a single application. After a single application of Wet and Forget, you can expect to see results within 1-3 months. On most surfaces and stains, you will see some lightening and cleaning of the surface within 2 weeks.
Continued performance and results may be observed for up to 1 year and beyond.
To get the most out of your Wet and Forget treatments, it is important to follow the instructions on the product label and to perform periodic assessments of the area being treated. It is also important to note that some surfaces may take longer to show results after wet and forget treatments due to the presence of dense organic material.
How long does it take for wet and forget to work on moss?
Wet and Forget is a product that is designed to help remove moss from outdoor surfaces, such as roofs, patios, and decks. The exact time it takes for Wet and Forget to work depends on a variety of factors, such as the amount of moss, the type of moss, the weather and the environment.
In general, it can take anywhere from a few days to several months for Wet and Forget to completely remove the moss from a surface. If the area is small, the moss should start to show signs of fading within a few days.
However, if the moss is thick or it is in a shady, wet area, it could take longer for the product to work. For best results, re-apply Wet and Forget every two or three weeks until all the moss is gone.
How long should wet and forget be applied before rain?
Wet and Forget should be applied at least 10-12 hours before rain. If applied too close to a rainfall, it can wash away the product. It’s important to read the label of the Wet and Forget product to see how long you should wait before it rains.
In general, you don’t want to apply it any earlier than 24 hours before the rain. If you do apply the product too close to the rain, it may not be fully activated and you may need to reapply the product after the rain shower passes.
For best results, make sure to apply Wet and Forget 10-12 hours before the rain is set to start.
Do you have to rinse wet and forget?
No, you do not have to rinse wet and forget. Wet & Forget Outdoor is a revolutionary, patented technology that works with the wind and rain to gently clean the surface over time. This technology, combined with its proprietary surfactants, provides unbeatable mold, mildew, and algae removal.
All you have to do is simply spray the surface and leave it. No need to come back and scrub, pressure wash, or rinse later. Wet & Forget Outdoor does the work for you and works with nature, not against it.
Does wet and forget work in cold weather?
Yes, Wet and Forget can still be used in cold weather. For best results, the temperature should not dip below 0 degrees Celsius. The active ingredients in Wet and Forget continue to work in cold weather, so when it is diluted, your solution will still be effective.
However, the colder temperatures may slow down the process of eliminating algae, moss, and mildew. Applying Wet and Forget in cold weather does not harm plants or the environment, just the rate at which it works.
To get the best results, it is recommended to use the product when temperatures are between 10-25 degrees Celsius.
Can I apply wet and forget with a watering can?
Yes, you can apply Wet and Forget with a watering can. This has the advantage of allowing you to thoroughly and evenly apply the product to hard-to-reach areas, as well as ensuring that the areas are completely covered.
When applying with a watering can, you should always dilute the Wet and Forget with a 1:1 ratio of water to the product. For example, one gallon of Wet and Forget should be mixed with one gallon of water before being applied.
After the product has been adequately mixed, use your watering can to apply the solution evenly to the affected surfaces. Be sure to take extra care to not allow the product to run off onto plants, shrubs or grass.
Allow the product to sit on the surfaces for approximately 10 minutes before rinsing off with water from a garden hose.
Is wet it and forget it safe for pets?
Wet and Forget it is a household cleaning and treatment product that has many uses. It is an environmentally-friendly product that can be used on a variety of surfaces, and is advertised as being safe for both pets and people when used as directed.
However, it’s not something to be used around pets without proper caution.
For safety, it is wise to keep pets and children away from treated surfaces until the product has had a chance to dry. This is especially true for any surfaces that have had Wet and Forget applied to them outdoors, as children and pets could ingest the product by accident.
It’s important that the directions on the container are followed closely when using this product, as mixing it with other products can result in an unsafe mixture for pets.
Overall, Wet and Forget can be a safe and useful product for households, but it’s always important to take proper precautions when using it. It’s best to keep pets and small children away from treated surfaces, and to adhere to the detailed directions listed on the product container.
How much area does wet and forget cover?
Wet and Forget is a powerful cleaning product that is used to help clean and remove moss, mold, mildew, and other outdoor surface stains. It can be used on a variety of outdoor surfaces, including roofs, siding, outdoor furniture, walkways, decks, patios and more.
Depending on the strength of the cleaning solution and the concentration used, Wet and Forget can cover up to 2,000-4,000 square feet of area per diluted gallon of cleaner. It is important to note that the coverage may vary depending on the surface material, the amount of surface fouling, and the contact time of the product with the surface.
For best results, it is recommended to follow the instructions on the product label.
What time of year should I use Wet and Forget?
Wet and Forget is an outdoor cleaner that is formulated to clean a variety of outdoor surfaces such as brick, stone, stucco, wood, vinyl, cedar shakes, and more. The cleaner can be used to clean outdoor surfaces throughout the year, however, it is most effective when the outdoor surfaces are dry and the temperature is not too cold.
If using the cleaner in warmer climates, it can be used any time of the year, however, colder climates would be best served by using the cleaner in the warmer spring and summer months. In any climate, it is important to ensure that any surface that you plan to clean with Wet and Forget will not be exposed to freezing temperatures within 24-48 hours after application.
This will help to ensure that the cleaner has enough time to work effectively before being exposed to cooler temperatures.
In addition to not applying Wet and Forget in temperatures below 32°F (0°C), it is important to avoid applying the cleaner during periods of heavy rain or high winds. Wet and Forget is a highly concentrated cleaning solution and should not be washed away before it has had an adequate amount of time to work, so waiting for a clear, sunny day to apply is recommended.
Overall, Wet and Forget is an effective outdoor cleaner that can be used throughout the year. However, for best results, it should not be applied in temperatures below freezing and during periods of heavy rain or high winds.
For optimum results, the cleaner should be used during dry and milder temperatures in the spring and summer months.
Can you use wet it and forget it in your shower?
Yes, you can definitely use Wet & Forget in your shower! This is a great product for shower cleaning, as it helps to reduce soap scum and mildew build-up without a lot of effort. It is applied to the surface of the shower and then left to do its work.
No scrubbing is required! The active ingredients break down the soap scum and mildew over time, reducing the need to scrub or clean the surfaces. To use it in your shower, simply mix a half gallon of Wet & Forget with 3 gallons of water and mix together in a bucket or other container.
Then use a sponge or brush to apply the solution to the entire shower surface. Leave it for several hours before rinsing with warm water for best results. This product is a great way to keep your shower surfaces looking clean and sparkling!.
How much Wet and Forget do I need?
The amount of Wet and Forget you need depends on the size of the area that needs to be treated. For areas under 500 square feet, use one gallon of Wet and Forget solution mixed with five gallons of water.
For larger areas, a general recommendation is to use one gallon of Wet and Forget for every 800-1000 square feet of surface area. To determine exactly how much you will need for your project, you can use the coverage calculator on the Wet and Forget website.
Simply input the dimensions of the area you need to treat, select the type of application, and the calculator will provide the exact amount of Wet and Forget you need for the job.
What is the way to apply Wet and Forget?
To apply Wet and Forget, start by making sure the surface to be treated is clear of any debris. Sweep and/or pressure wash the area to be treated to remove dirt, mold, mildew and any other growth. Once the surface has been cleaned, shake the Wet and Forget bottle vigorously before and during use.
Apply the mixture to the surface with a pump sprayer, hose end sprayer, roller or brush. If using a pump sprayer, create a mixture of 4oz of Wet and Forget concentrate per 1 gallon of water. If using a hose end sprayer, mix 1 part Wet and Forget with 5 parts water.
If applying by brush or roller dilute 1 part concentrate with 9 parts water. Mix the solution thoroughly and spread evenly over the surface. Allow the mixture to sit and dry naturally in the sun. Re-apply if heavy growth is present.
For best results, apply Wet and Forget in the early morning hours before dew sets in.
