Badger garbage disposals come with a limited warranty that lasts for two years from the date of purchase. This warranty covers parts, labor and defects in material, but does not cover any damage to the product caused by misuse or improper installation.
This warranty is non-transferable and applies to the original purchaser only. If your Badger garbage disposal fails during the two-year warranty period, you can contact InSinkErator to arrange for the disposal to be repaired or replaced, free of charge.
However, you may be responsible for paying for the cost of shipping and handling.
Why did my Badger garbage disposal stop working?
If your Badger garbage disposal has stopped working, there are several potential causes that could be to blame. The most likely culprit is a broken or burned-out motor. Another possibility is a blocked drain or a jammed impeller.
Additionally, it could be due to a lack of power, an improperly installed air switch, or a malfunctioning internal motor switch. It is also possible that a foreign object was caught in the blades, preventing it from operating properly.
If none of these potential causes can be identified, it may be necessary to access the internal components of the appliance to identify the issue. Depending on the underlying problem, it may be necessary to have the Badger garbage disposal serviced or possibly replaced.
How do you know if your garbage disposal motor is burnt out?
If your garbage disposal motor is burnt out, you may notice any of the following signs:
1. Your garbage disposal is not turning on when you flip the switch. This can indicate that the motor is not getting power, which could mean it is burnt out.
2. You may also hear an unusual noise coming from the garbage disposal, such as a buzzing or humming noise, which could indicate a burnt out motor.
3. If you turn the garbage disposal on and it makes strange grinding noises, this can also be a sign that the motor has burnt out.
4. If the garbage disposal will not stay on when you have it running, this can indicate that the motor has become burnt out.
If you are experiencing any of the above symptoms, it is likely that your garbage disposal motor is burnt out and it should be replaced.
Does a Badger disposal have a reset button?
Yes, most Badger disposals have a reset button. Depending on the model you have, the reset button may be either an actual button located on the bottom of the disposal or a switch located inside the unit.
To reset the disposal, either a button or switch will need to be pressed and held in for approximately three seconds. If the reset button is an actual button, it may have the words “Reset” or “Reset/Tripped” printed on it to identify it.
If you have an external switch, it will be located around the grinding chamber or motor area of the disposal. Be sure to turn off power supplying to the disposal before attempting a reset.
What does it mean when your garbage disposal just hums?
When you turn on your garbage disposal and it only produces a humming sound, it typically means that the motor is running but the blades are stuck or jammed. The humming sound is the motor attempting to rotate the blades, but the blades are not able to move due to the obstruction.
Depending on what type of material is stuck in the disposal, you may be able to remove it by hand. However, if it is too far down to reach, you may need to use pliers or a wrench to open the disposal manually.
If you are unable to remove the obstruction yourself, contact a professional plumber to fix the problem.
Is it worth it to fix a garbage disposal?
Yes, it is definitely worth it to fix a garbage disposal. Replacing a garbage disposal can be expensive and time-consuming, so it is often worth it to try and repair the unit if possible. A malfunctioning garbage disposal can be fixed with the right tools, knowledge, and time.
If you are able to successfully diagnose the cause of the problem yourself, you may be able to repair it relatively inexpensively. If you find yourself unable to determine why the disposal is malfunctioning, it is best to contact a professional plumber to help you correctly diagnose and repair the unit.
How long do waste disposals last?
The average lifespan of a waste disposal can vary greatly depending on a variety of factors, such as the type of motor, how often it is used, and whether or not maintenance is done regularly. For example, a high-end, permanently lubricated motor waste disposal should last around 14 years, while a budget model with a standard motor may last only 5 years.
Ultimately it depends on the individual model and how much wear and tear it has been subject to over the years. Software, however, can often become outdated much faster than hardware in a garbage disposal, so it’s a good idea to pay attention to new technology developments that might be a benefit.
Additionally, it’s important to perform routine maintenance and repair any components in the system promptly. This includes cleaning out the disposal chamber and pipes, checking for any obstructions, and ensuring that the motor and blades are running correctly.
With proper maintenance, most models can remain in use for about 10 years.
Should I run hot or cold water with my garbage disposal?
When it comes to running water with your garbage disposal, it is best practice to run it with cold water. Cold water helps liquefy the grease and oils that are often present in food waste as opposed to hot water which can actually harden any remaining grease or oil in the disposal.
Running cold water also helps to flush leftover food particles, which can harden over time if not cleaned out completely. Additionally, the cold water helps to cool the blades, thus increasing their lifespan.
Finally, cold water is more efficient at draining and therefore can help reduce the risk of potential clogs and backups in your drains.
What kind of maintenance does a garbage disposal need?
Regular maintenance is an important part of taking care of a garbage disposal. Depending on how often the garbage disposal is used, it should be cleaned and possibly serviced every few months.
To clean the disposal, first use a cup or cloth to protect your hands, then switch the unit off and unplug it from the wall. Use an old toothbrush or a pipe cleaner to scrub out any debris and build-up that has accumulated at the opening of the disposal.
Make sure to pay close attention to the blades on the rotating plate, as these tend to have the most build-up. Additionally, pouring boiling water in the drain or disposer can help to clear out any food particles or fats that have built up.
It’s also important to perform regular inspections of the unit to check for any signs of damage or wear and tear. Be sure to look for missing screws, corrosion or rust, and any cracks in the housing.
If any of these issues are found, the unit should be replaced or serviced as soon as possible.
Additionally, it’s important to use the garbage disposal correctly and avoid grinding any materials that are not designed to be ground, such as bones, plastics, rubber, or other non-food items. This helps to prevent damage to the blades and motor and prolongs the life of the disposal.
How do you maintain a sink disposal?
Maintaining a sink disposal is relatively easy. First, it is important to make sure that only certain materials are put into the disposal. These include small scraps of fruits and vegetables, small bones, and small amounts of cooking oils.
Avoid putting stringy, fibrous, and starchy food items, like celery, onion skins, and potato peels, as well as greasy, thick items, like bacon fat, and hard foods, like bones, egg shells, and nutshells.
Next, grind easily-dissolvable foods, such as fruit and vegetables, and some citrus peel, in batches to ensure they are crushed, as well as larger food items. It is also important to run cold water down the disposal as you grind and after you are finished.
This helps to cool the blades and helps food particles move through the disposal.
To keep the sink disposal clean, it is important to avoid using harsh chemicals. Instead, put a quarter cup of baking soda and a cup of white vinegar into the disposal, then run cold water for 30 seconds.
Wait 30 minutes, then turn the disposal on and run with cold water for about 15-20 seconds. This will help clean any build-up in the disposal blades.
Finally, it is important to follow the manufacturer’s instructions and safety guidelines when using the disposal. This includes turning off the power when you are not using it and not putting your hand into the disposal.
What to do if InSinkErator stopped working?
If your InSinkErator has stopped working, there are a few steps you can take to try to resolve the problem. First, check the power and plug connections to make sure they are securely connected. If the connections appear to be secure, try resetting the power by unplugging the InSinkErator unit and plugging it back in.
If you still experience the same issue, check the circuit breaker and reset the breaker to see if that resolves the issue.
If the reset did not work, the system may be clogged, jammed, or broken. Try pushing down on the reset button, as this may be able to clear a jam or clog within the system. If this does not work, try running vinegar down the drain.
This can help to dissolve mineral deposits and clear any clogs or jams within the system.
If none of these solutions are able to solve the issue, it is likely that the InSinkErator unit is broken and needs to be replaced. You can take the unit to a professional plumber to help with the installation process.
Alternatively, you can purchase a new InSinkErator and follow the instructions that come with it to complete the installation process.
How long is InSinkErator warranty?
The InSinkErator warranty can vary depending on the product purchased. Generally, all InSinkErator disposers—including the Evolution, PRO and Badger series—come with a We Come to You 2–3–4 warranty service for residential applications.
This warranty covers parts and in-home labor for two years from the date of purchase. It also covers additional parts for three years and disposal service for four years from the date of purchase.
For select models, including the Badger 5 and Badger 9, InSinkErator offers a 7-year We Come to You parts and labor warranty. The InSinkErator warranty also covers InSinkErator water dispensers and boiling water systems with a five-year We Come to You parts and labor warranty on all stainless steel components.
Commercial applications generally receive a one-year warranty with some select models having an extended five-year warranty.
It’s always best to double-check the warranty terms and conditions that come with the product to be clear on the coverage duration and service rights.
Can Insinkerators be repaired?
Yes, Insinkerators can be repaired. Depending on the extent of the repair needed, you may be able to do it yourself by utilising Insinkerator’s troubleshooting guide for their products. This includes guided videos, instruction manuals, and sometimes phone support from the Insinkerator team.
If you have an issue with your Insinkerator unit, you should first refer to the troubleshooting guide and see if it can be resolved on your own. However, if the problem persists, contacting an experienced repair service or professional plumber may be the best course of action.
Repair services can provide further assistance in diagnosing and addressing the problem by either coming to your home or providing a video call, allowing you to easily get the help you need without leaving the comfort of your home.
How do you troubleshoot an InSinkErator?
Troubleshooting an InSinkErator can be done in a few steps. First, inspect the power cord, restart circuit breaker and reset the GFCI outlet if present to determine if the problem lies within the power source.
Check that the cord is securely connected, and the circuit breaker has not tripped. If the power source is fine, check the InSinkErator for a clog. If the clog does not clear, remove and unclog the stopper and/or air gap assembly.
Then, test the garbage disposal for any leaks or leakage. If damage is found, replace the disposal. If you find that the disposal is not grinding properly, make sure it is securely attached to the mounting assembly and it has not shifted.
This can be remedied by ensuring that the three mounting bolts are properly tightened and the disposal is aligned correctly. Check for loose or foreign objects in the grinding chamber, and then remove them.
Lastly, inspect the drain pipe and make sure it is securely attached to the disposal and there are no blockages or clogs. If all else fails, reset the InSinkErator by pressing the reset button. If you still cannot determine the source of the issue, contact InSinkErator customer service for further advice.
Do plumbers fix InSinkErator?
Yes, plumbers can fix InSinkErator appliances. Depending on the type of repair needed, it may require the replacement of a part or a complete overhaul. The most common repairs involve unclogging the unit, replacing old seals or disposer blades, or replacing a faulty motor.
It is usually best to call a professional plumber rather than trying to repair it yourself. A plumber will have the right tools and expertise to identify the issue and make the necessary repairs. Plumbers can also offer advice on replacing or maintaining InSinkErator appliances so they last.
Is there a reset button on an InSinkErator?
No, there is not a reset button specifically designed for an InSinkErator. InSinkErator disposals have an Overload Protection circuit which will shut off the disposal motor if it is overloaded or jammed.
To reset the disposal after it has shut off, you can first depress the reset button located on the bottom of the disposal. After doing this, turn the power back on to the disposal at the switch or circuit breaker and the disposal should work again.
If the problem that caused the disposal to shut off is still present, it will shut off again. In this case, it is best to check the disposal to identify and remove any blockages causing the issue. If this doesn’t correct the issue, you may need to replace any damaged parts or contact a professional for help.
Why is my garbage disposal humming but not spinning?
Most of the time, if your garbage disposal is humming but not spinning, it is an indication that the flywheel of the disposal has jammed or locked up. This can occur for a variety of reasons, such as food scraps or small objects that have become lodged in the grinding chamber.
It can also happen if the rotary cutter is being obstructed by a foreign object. To troubleshoot your garbage disposal, first, turn off the power to it at the circuit breaker and then make sure nothing is lodged in the grinding chamber.
Once you are done checking for any blockage or foreign objects, turn the power back on and use a long object such as a wrench or pliers to manually spin the flywheel. If you turn the flywheel and it spins freely, then you know that the flywheel was locked up and the motor has now been reset.
If the motor is still humming but not spinning, then you should contact a professional to have it looked at.
