Skip to Content

How long should cabinet pulls be for upper cabinets?

The length of cabinet pulls for upper cabinets should be chosen based on the specific design of the cabinet, as well as on the purpose of the room. Generally, the rule of thumb is that pulls should be at least three inches long for upper cabinets.

This allows for fingers to easily navigate and slip over the hardware, making for an easier and safer experience when opening and closing doors. Additionally, this measurement also provides ample gripping space for those who may have shorter arms or trouble reaching higher heights.

While three inches is the most common length for upper cabinet pulls, this measurement could be adjusted depending on the size of the cabinet and the height of the user. For example, if the user reaches a higher height, then longer pulls may be necessary to ensure easy and safe accessibility.

If a more ornate design is desired, then longer pulls can also be used to bring more attention to the hardware without interfering with functionality.

How do you measure what size drawer pulls you need?

When measuring what size drawer pulls you need, there are a few factors you’ll want to consider. First, measure the distance between the center of the screws that will mount the pulls. If there are two screws, measure the distance between them.

Typically, 3” long screws should be used with 3” drawer pulls and 4” screws should be used with 4” pulls. You’ll also want to measure the length of the drawer face, as this will give you an idea of how big the pulls should be and in what style to choose.

Taking into consideration the size of the drawer and any other decorative details, you should be able to find the size and style that is most appropriate for the space. Additionally, remember to consider the style of your kitchen or room when selecting your drawer pulls as this will ensure that the finish fits in with the overall décor.

What is the standard size for cabinet pulls?

The standard size for cabinet pulls is 3 inches from the center of the screw holes to the outside edge of the handle. Cabinet pulls are typically 2 1/2″ to 3″ long, with 1″ to 1 1/2″ being the most common sizes.

When installing cabinet pulls, measure the distance between the mounting holes and select a handle that matches the measurement. If the measurements are not exactly the same, you may need to adjust the handle size slightly or use pull extenders to fill the gap.

Additionally, when selecting the size of your cabinet pulls, also take into account where they will be located such as on drawers or cabinet doors. If the pulls are going on drawers, smaller pulls are best due to limited space.

However, if the pulls are going on cabinet doors, larger pulls tend to look better.

How do you measure pull handles on cabinets?

Measuring pull handles on cabinets should be done in several steps. First, you need to determine the horizontal and vertical spacing of your cabinet drawers and doors. Measure the length of the handle and add 3 inches to your measurements.

This will help ensure that the handle will not be too small when installed.

Next, take your measurements and mark the center of the holes where the handles will be installed. Measure the distance between the two centers and divide in half. This will give you the exact location of where the two mounting screws will go.

Once your holes are marked, drill the holes and then mount the handle onto the cabinet. Make sure the handle is centered and securely attached. Then, measure the distance between the two screws on the handle and the screws on the cabinet drawer or door.

This will give you the size of the handle that is needed for your project. Lastly, you should use a level to make sure the handle is straight and secure.

Following these steps will ensure that you measure and install the correct pull handle for your cabinet.

How do you measure cabinet hardware for replacement?

Measuring cabinet hardware for replacement is a fairly straightforward process, which starts with measuring the length, width, and thickness of the existing hardware. Measure the distance between mounting holes for longer straight pulls or the width of the hole for knobs.

When measuring pulls, make sure to measure from the far side of one mounting hole to the far side of the other.

Cut out the measurements and take them to the hardware store with you. While shopping, measure each piece of hardware carefully against the template and make sure you double check the dimensions before making your purchase.

Test fit each piece of hardware against the doors and drawer faces. Don’t forget to get your screws! Make sure they are the right type and length screws for the hardware you’re installing. If the previous screws are stripped, replace them with longer screws that go into the cabinet walls, rather than the cabinet door.

When you have all the necessary pieces in place, you can begin installing the new cabinet hardware. Be sure to mark mounting holes, pre-drill holes, and use the appropriate screws based on your measurements.

To ensure a secure fit, do not overtighten screws or use the wrong screws.

Where is the place to install cabinet pulls?

The best place to install cabinet pulls is on the external faces of the cabinet doors, where they are visible and accessible when the door is open. Generally, cabinet pulls will be mounted on the top and bottom edges of the doors, and should be placed in the center if longer pulls are used.

If smaller pulls are used, it may be best to position them slightly off to one side, allowing for easier access to the handle. Make sure to measure the size of pulls before drilling holes, so that the pulls rest in the correct position without being too close to the edge.

Additionally, the screws used to secure the pulls should be long enough to securely hold the handles in place.

Where should pull handles be placed on kitchen cabinets?

When it comes to placing pull handles on kitchen cabinets, there are several important factors to take into consideration. Firstly, ensure that the handles are located at a comfortable height – around elbow height is ideal and allows for easy reach.

Secondly, ensure that the handles blend in with the overall design of the cabinet, as a mismatched handle can seem out of place. Finally, it is important to consider how many handles are needed. Typically, wider cabinets may require two handles to make it easier to open.

Additionally, consider any user requirements; if there’s someone in your home with mobility issues, you may want to consider wider handles, or handles that are lower down, that they can easily reach.

What is the rule of thumb for cabinet hardware?

The rule of thumb when it comes to cabinet hardware is to select the pieces that best suit the style of cabinet and the overall look of the room. For example, if you have a modern kitchen, you may want to select hardware such as brushed metal, glass, or chrome.

If your kitchen is more traditional, your hardware should match that style too, with options such as wooden knobs, metal pulls, or painted accents. Additionally, when selecting hardware, consider the size of your drawers and cabinet doors in order to choose the right size hardware that is in proportion to the size of the cabinet area.

An alternate rule of thumb is to select hardware in a range of sizes or finishes that allows for some variation, to create a more interesting and custom look.

Should cabinet pulls be vertical or horizontal?

It depends on the type of cabinet you have and the look you are trying to achieve. Generally, vertical pulls are best for cabinet doors that open horizontally and have a wider profile, such as with pantry cabinets and some wall cabinets.

Horizontal pulls are typically used on drawers and corner cabinets. Additionally, horizontal pulls can be more modern looking while vertical pulls are more traditional. So, depending on the overall aesthetic you’re trying to create with your cabinet hardware, you may want to consider one over the other.

Similarly, if you’re dealing with a smaller cabinet, you may want to opt for a smaller pull which could be either vertical or horizontal. It all comes down to preference and what look you’re going for.

Should I use knobs or pulls on kitchen cabinets?

Whether you should use knobs or pulls on kitchen cabinets depends on your personal preference and desired aesthetic for the space. Some prefer knobs for the more traditional and classic feel, while pulls are trending and can give the space a more modern look.

Knobs are typically the smaller option and come in a range of sizes and shapes, including round, square, and oblong. Knobs are a great classic option that won’t go out of style. Along with knobs being more affordable, they are also easier to use since you can place your whole hand on the knob to pull the door open.

Pulls, on the other hand, can add a more modern touch to the kitchen and also come in a range of sizes and shapes. Pulls are mounted vertically on the door so you can use your fingers or entire hand to pull open the doors.

They also make kitchen cabinets look larger, as the eye can continue to move down the length of the pull instead of being stopped by a smaller knob.

When deciding which option to choose for the kitchen cabinets, consider what will be most helpful for you in the space. Knobs may be preferable if you have young children at home and are worried about them being able to easily open the doors.

Pulls may be the best choice if you want a more modern look or want to make the kitchen cabinets look longer. No matter what you choose, try to select hardware that is either a uniform design or similar in style and finish to keep the space looking cohesive.

Where do you mount drawer pulls?

Drawer pulls, also called drawer handles, are typically mounted on the center of the drawer front. To mount a drawer handle, you will need to measure and mark the center of the drawer and the holes in the handle.

Once the handle is lined up and marked, use a drill to create pilot holes. Insert the screws that came with the handle and tighten with a screwdriver until secure. Depending on the style of the drawer handle, installation may require a screwdriver, drill, and/or drill bits, and dowels.

Depending on the material chosen, you may need to pre-drill holes to prevent splitting the drawer front. For example, drilling holes in wood or plastic before installation can help ensure drawer pulls stay securely fastened.